From: "Pierre-Loup A. Griffais" <pgriffais@xxxxxxxxxxxxxxxxx>
To allow us to later create / destroy the input device from the urb
callback, we need to initialize/ deinitialize the input device from a
separate function. So pull that logic out now to make later patches
more "obvious" as to what they do.
Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@xxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Pavel Rojtberg <rojtberg@xxxxxxxxx>
---
drivers/input/joystick/xpad.c | 199 +++++++++++++++++++++++++++++++++++++----------------------------
1 file changed, 113 insertions(+), 86 deletions(-)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 15da2a3..43490ea 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -343,6 +343,7 @@ struct usb_xpad {
int mapping; /* map d-pad to buttons or to axes */
int xtype; /* type of xbox device */
unsigned long pad_nr; /* the order x360 pads were attached */
+ const char *name; /* name of the device */
};
/*
@@ -1044,11 +1045,101 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
}
}
+static int xpad_init_input(struct usb_xpad *xpad)
+{
+ struct input_dev *input_dev;
+ int i, error;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ xpad->dev = input_dev;
+ input_dev->name = xpad->name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(xpad->udev, &input_dev->id);
+ input_dev->dev.parent = &xpad->intf->dev;
+
+ input_set_drvdata(input_dev, xpad);
+
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ input_dev->evbit[0] |= BIT_MASK(EV_ABS);
+ /* set up axes */
+ for (i = 0; xpad_abs[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs[i]);
+ }
+
+ /* set up standard buttons */
+ for (i = 0; xpad_common_btn[i] >= 0; i++)
+ __set_bit(xpad_common_btn[i], input_dev->keybit);
+
+ /* set up model-specific ones */
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+ xpad->xtype == XTYPE_XBOXONE) {
+ for (i = 0; xpad360_btn[i] >= 0; i++)
+ __set_bit(xpad360_btn[i], input_dev->keybit);
+ } else {
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ __set_bit(xpad_btn[i], input_dev->keybit);
+ }
+
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ __set_bit(xpad_btn_pad[i], input_dev->keybit);
+ }
+ /* this should be a simple else block. However historically xbox360w
+ * has mapped DPAD to buttons while xbox360 did not.
+ * This made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if(!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
+ for (i = 0; xpad_abs_pad[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ }
+
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+ __set_bit(xpad_btn_triggers[i], input_dev->keybit);
+ } else {
+ for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+ }
+
+ error = xpad_init_ff(xpad);
+ if (error)
+ goto fail_init_ff;
+
+ error = xpad_led_probe(xpad);
+ if (error)
+ goto fail_init_led;
+
+ error = input_register_device(xpad->dev);
+ if (error)
+ goto fail_input_register;
+
+ return 0;
+
+fail_input_register:
+ xpad_led_disconnect(xpad);
+
+fail_init_led:
+ input_ff_destroy(input_dev);
+
+fail_init_ff:
+ input_free_device(input_dev);
+ return error;
+}
+
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
- struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
int ep_irq_in_idx;
int i, error;
@@ -1070,12 +1161,14 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
}
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!xpad || !input_dev) {
+ if (!xpad) {
error = -ENOMEM;
goto fail1;
}
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
+
xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->idata_dma);
if (!xpad->idata) {
@@ -1093,6 +1186,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->intf = intf;
xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
+ xpad->name = xpad_device[i].name;
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
@@ -1111,78 +1205,10 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->mapping |= MAP_STICKS_TO_NULL;
}
- xpad->dev = input_dev;
- usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
- strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
-
- input_dev->name = xpad_device[i].name;
- input_dev->phys = xpad->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->dev.parent = &intf->dev;
-
- input_set_drvdata(input_dev, xpad);
-
- input_dev->open = xpad_open;
- input_dev->close = xpad_close;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
-
- if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
- input_dev->evbit[0] |= BIT_MASK(EV_ABS);
- /* set up axes */
- for (i = 0; xpad_abs[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs[i]);
- }
-
- /* set up standard buttons */
- for (i = 0; xpad_common_btn[i] >= 0; i++)
- __set_bit(xpad_common_btn[i], input_dev->keybit);
-
- /* set up model-specific ones */
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
- xpad->xtype == XTYPE_XBOXONE) {
- for (i = 0; xpad360_btn[i] >= 0; i++)
- __set_bit(xpad360_btn[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_btn[i] >= 0; i++)
- __set_bit(xpad_btn[i], input_dev->keybit);
- }
-
- if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
- for (i = 0; xpad_btn_pad[i] >= 0; i++)
- __set_bit(xpad_btn_pad[i], input_dev->keybit);
- }
- /* this should be a simple else block. However historically xbox360w
- * has mapped DPAD to buttons while xbox360 did not.
- * This made no sense, but now we can not just switch back and have to
- * support both behaviors.
- */
- if(!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
- xpad->xtype == XTYPE_XBOX360W) {
- for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
- }
-
- if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
- for (i = 0; xpad_btn_triggers[i] >= 0; i++)
- __set_bit(xpad_btn_triggers[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_triggers[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
- }
-
error = xpad_init_output(intf, xpad);
if (error)
goto fail3;
- error = xpad_init_ff(xpad);
- if (error)
- goto fail4;
-
- error = xpad_led_probe(xpad);
- if (error)
- goto fail5;
-
/* Xbox One controller has in/out endpoints swapped. */
ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
@@ -1194,10 +1220,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- error = input_register_device(xpad->dev);
- if (error)
- goto fail6;
-
usb_set_intfdata(intf, xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
@@ -1210,32 +1232,37 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
*/
xpad->irq_in->dev = xpad->udev;
error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
- if (error)
- goto fail7;
+ if (error) {
+ usb_kill_urb(xpad->irq_in);
+ goto fail4;
+ }
}
+ xpad->pad_present = 1;
+ error = xpad_init_input(xpad);
+ if (error)
+ goto fail4;
return 0;
- fail7: input_unregister_device(input_dev);
- input_dev = NULL;
- fail6: xpad_led_disconnect(xpad);
- fail5: if (input_dev)
- input_ff_destroy(input_dev);
fail4: xpad_deinit_output(xpad);
fail3: usb_free_urb(xpad->irq_in);
fail2: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- fail1: input_free_device(input_dev);
- kfree(xpad);
+ fail1: kfree(xpad);
return error;
}
+static void xpad_deinit_input(struct usb_xpad *xpad)
+{
+ xpad_led_disconnect(xpad);
+ input_unregister_device(xpad->dev);
+}
+
static void xpad_disconnect(struct usb_interface *intf)
{
struct usb_xpad *xpad = usb_get_intfdata (intf);
- xpad_led_disconnect(xpad);
- input_unregister_device(xpad->dev);
+ xpad_deinit_input(xpad);
xpad_deinit_output(xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
