NOTE: This patch set applies to synaptics-rmi4 branch in
Dmitry Torokhov's input tree.
This patch set consolidates some outstanding patches and then builds on
that to add support for new devices. The first 11 patches were provided
by Benjamin Tissoires with slight modifications. The remainder of the
patches remove unused functionality, consolidates the code for
2D sensors, and adds support for newer devices which use F12 for
reporting 2D sensing.
This patchset applies cleanly to the synaptics-rmi4 branch, but does not
successfully build because the synaptics-rmi4 branch is based on the 3.14
kernel and the patches make use of functionality introduced in later
kernels. I would suggest updating the synaptics-rmi4 branch to something
more resent. I also have some additional patches which convert hid-rmi
into a transport driver for rmi_core. I held off submitting since 3.14
doesn't contain hid-rmi. However, if we want to stick with 3.14 I can
make the appropriate modifications.
Thanks,
Andrew
Andrew Duggan (14):
Input: synaptics-rmi4: Use generic interrupt handling
Input: synaptics-rmi4: Add device tree support for RMI4 I2C devices
Input: synaptics-rmi4: Clean up Makefile
Input: synaptics-rmi4: Remove unused debugfs code
Input: synaptics-rmi4: Use ifdef to check if CONFIG_PM_SLEEP is set
Input: synaptics-rmi4: Remove unused firmware_name variable
Input: synaptics-rmi4: Add SPI transport driver
Input: synaptics-rmi4: Add support for packet register descriptors
Input: synaptics-rmi4: Create common functions for 2D sensors
Input: synaptics-rmi4: Add support for F12
Input: synaptics-rmi4: move structures and definitions to rmi.h
Input: synaptics-rmi4: use device managed memory for the data packet
buffer
Input: synaptics-rmi4: remove sensor_name in platform data
Input: synaptics-rmi4: Change the rmi device's name to be less generic
Benjamin Tissoires (12):
Input: synaptics-rmi4 - embed the function modules in rmi_core
Input: synaptics-rmi4 - add a common input device in rmi_driver
Input: synaptics-rmi4 - explicitly request polling when needed
Input: synaptics-rmi4 - prevent oopses when irq arrives while the
device is not bound
Input: synaptics-rmi4 - call rmi_driver_process_config_requests in
enable_sensor
Input: synaptics-rmi4 - add a reset callback
Input: synaptics-rmi4 - f11: fix bitmap irq check
Input: synaptics-rmi4 - f11: use the unified input node if available
Input: synaptics-rmi4 - f11: clean up rmi_f11_finger_handler
Input: synaptics-rmi4 - f11: allow the top software button property to
be set
Input: synaptics-rmi4 - f11: add support for kernel tracking
Input: synaptics-rmi4 - Add F30 support
.../bindings/input/rmi4/rmi_2d_sensor.txt | 55 +++
.../devicetree/bindings/input/rmi4/rmi_f01.txt | 40 ++
.../devicetree/bindings/input/rmi4/rmi_i2c.txt | 55 +++
.../devicetree/bindings/input/rmi4/rmi_spi.txt | 57 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/input/rmi4/Kconfig | 47 +-
drivers/input/rmi4/Makefile | 23 +-
drivers/input/rmi4/rmi_2d_sensor.c | 370 ++++++++++++++
drivers/input/rmi4/rmi_2d_sensor.h | 87 ++++
drivers/input/rmi4/rmi_bus.c | 205 ++++----
drivers/input/rmi4/rmi_bus.h | 129 +----
drivers/input/rmi4/rmi_driver.c | 468 +++++++++++++-----
drivers/input/rmi4/rmi_driver.h | 119 ++---
drivers/input/rmi4/rmi_f01.c | 57 ++-
drivers/input/rmi4/rmi_f11.c | 540 ++++++---------------
drivers/input/rmi4/rmi_f12.c | 461 ++++++++++++++++++
drivers/input/rmi4/rmi_f30.c | 403 +++++++++++++++
drivers/input/rmi4/rmi_i2c.c | 62 +--
drivers/input/rmi4/rmi_spi.c | 464 ++++++++++++++++++
include/linux/rmi.h | 270 +++++++++--
20 files changed, 3027 insertions(+), 886 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
create mode 100644 drivers/input/rmi4/rmi_2d_sensor.c
create mode 100644 drivers/input/rmi4/rmi_2d_sensor.h
create mode 100644 drivers/input/rmi4/rmi_f12.c
create mode 100644 drivers/input/rmi4/rmi_f30.c
create mode 100644 drivers/input/rmi4/rmi_spi.c
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
