On Tue, Nov 3, 2015 at 1:21 AM, Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
> On Mon, Nov 02, 2015 at 02:50:29PM -0600, Michael Welling wrote:
>> On Mon, Nov 02, 2015 at 09:19:50AM -0600, Rob Herring wrote:
>> > > +Required properties:
>> > > + - compatible : "ti,tsc2004"
>> > > + - interrupts : IRQ specifier
>> > > + - vio-supply : Regulator specifier
>> >
>> > reg property?
>>
>> Rob,
>>
>> It appears that I missed this in the description.
>>
>> Probably because I was following the lead of the ts2005 description.
>>
>> How does this look:
>> - reg : I2C address. 0x48 - 0x4b based on the voltage applied to
>> the AD1 and AD0 inputs on the IC.
>>
>
> How about the version below?
>
> Thanks.
>
> --
> Dmitry
>
>
> Input: tsc2004 - document ts2004 dt bindings
>
> From: Michael Welling <mwelling@xxxxxxxx>
>
> Adds documentation for the devicetree bindings of the new tsc2004 driver.
>
> Signed-off-by: Michael Welling <mwelling@xxxxxxxx>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> .../bindings/input/touchscreen/tsc2005.txt | 34 ++++++++++++++++----
> 1 file changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
> index 09089a6..b80c04b 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
> @@ -1,14 +1,15 @@
> -* Texas Instruments tsc2005 touchscreen controller
> +* Texas Instruments tsc2004 and tsc2005 touchscreen controllers
>
> Required properties:
> - - compatible : "ti,tsc2005"
> - - reg : SPI device address
> - - spi-max-frequency : Maximal SPI speed
> + - compatible : "ti,tsc2004" or "ti,tsc2005"
> + - reg : Device address
> - interrupts : IRQ specifier
> - - reset-gpios : GPIO specifier
> - - vio-supply : Regulator specifier
> + - spi-max-frequency : Maximum SPI clocking speed of the device
> + (for tsc2005)
>
> Optional properties:
> + - vio-supply : Regulator specifier
> + - reset-gpios : GPIO specifier for the controller reset line
> - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates
> in ohm (defaults to 280)
> - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
> @@ -18,6 +19,27 @@ Optional properties:
>
> Example:
>
> +&i2c3 {
> + tsc2004@48 {
> + compatible = "ti,tsc2004";
> + reg = <0x48>;
> + vio-supply = <&vio>;
> +
> + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
> + interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
> +
> + touchscreen-fuzz-x = <4>;
> + touchscreen-fuzz-y = <7>;
> + touchscreen-fuzz-pressure = <2>;
> + touchscreen-size-x = <4096>;
> + touchscreen-size-y = <4096>;
> + touchscreen-max-pressure = <2048>;
> +
> + ti,x-plate-ohms = <280>;
> + ti,esd-recovery-timeout-ms = <8000>;
> + };
> +}
> +
> &mcspi1 {
> tsc2005@0 {
> compatible = "ti,tsc2005";
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
