On Mon, 2015-09-07 at 17:36 +0300, Irina Tirdea wrote: > After power on, it is recommended that the driver resets the device. > The reset procedure timing is described in the datasheet and is used > at device init (before writing device configuration) and > for power management. It is a sequence of setting the interrupt > and reset pins high/low at specific timing intervals. This procedure > also includes setting the slave address to the one specified in the > ACPI/device tree. > > This is based on Goodix datasheets for GT911 and GT9271 and on Goodix > driver gt9xx.c for Android (publicly available in Android kernel > trees for various devices). > > For reset the driver needs to control the interrupt and > reset gpio pins (configured through ACPI/device tree). For devices > that do not have the gpio pins declared, the functionality depending > on these pins will not be available, but the device can still be used > with basic functionality. This throws: Sep 09 18:22:47 winbook kernel: Goodix-TS i2c-GDIX1001:00: ID 9271, version: 1040 Sep 09 18:22:47 winbook kernel: ------------[ cut here ]------------ Sep 09 18:22:47 winbook kernel: WARNING: CPU: 3 PID: 3298 at drivers/pinctrl/intel/pinctrl-baytrail.c:338 byt_gpio_direction_output+0x97/0xa0() Sep 09 18:22:47 winbook kernel: Potential Error: Setting GPIO with direct_irq_en to output Sep 09 18:22:47 winbook kernel: Modules linked in: Sep 09 18:22:47 winbook kernel: goodix_backport(OE+) hid_logitech_hidpp hid_logitech_dj cdc_mbim cdc_wdm cdc_ncm usbnet mii uvcvideo videobuf2_vmalloc videobuf2_core videobuf2_memops v4l2_common snd_usb_audio v Sep 09 18:22:47 winbook kernel: snd_soc_sst_byt_rt5640_mach coretemp snd_soc_sst_baytrail_pcm iTCO_vendor_support snd_soc_sst_ipc kvm_intel snd_soc_sst_dsp gpio_keys kvm snd_intel_sst_acpi snd_intel_sst_core sn Sep 09 18:22:47 winbook kernel: lockd grace sunrpc i915 mmc_block i2c_algo_bit drm_kms_helper drm sdhci_acpi video sdhci mmc_core i2c_hid [last unloaded: goodix] Sep 09 18:22:47 winbook kernel: CPU: 3 PID: 3298 Comm: insmod Tainted: G OE 4.2.0-0.rc3.git4.2.fc22.i686 #1 Sep 09 18:22:47 winbook kernel: Hardware name: WinBook TW100/TW100, BIOS 1.02.00 08/25/2014 Sep 09 18:22:47 winbook kernel: c0d439a7 bb4c1aaf 00000000 de2f7bb4 c0aa23b9 de2f7bf4 de2f7be4 c045c677 Sep 09 18:22:47 winbook kernel: c0cbe3b8 de2f7c14 00000ce2 c0cbe3f4 00000152 c073cd87 c073cd87 f7c5e0b8 Sep 09 18:22:47 winbook kernel: f4bb309c f7c5e0b0 de2f7c00 c045c6ee 00000009 de2f7bf4 c0cbe3b8 de2f7c14 Sep 09 18:22:47 winbook kernel: Call Trace: Sep 09 18:22:47 winbook kernel: [<c0aa23b9>] dump_stack+0x41/0x52 Sep 09 18:22:47 winbook kernel: [<c045c677>] warn_slowpath_common+0x87/0xc0 Sep 09 18:22:47 winbook kernel: [<c073cd87>] ? byt_gpio_direction_output+0x97/0xa0 Sep 09 18:22:47 winbook kernel: [<c073cd87>] ? byt_gpio_direction_output+0x97/0xa0 Sep 09 18:22:47 winbook kernel: [<c045c6ee>] warn_slowpath_fmt+0x3e/0x60 Sep 09 18:22:47 winbook kernel: [<c073cd87>] byt_gpio_direction_output+0x97/0xa0 Sep 09 18:22:47 winbook kernel: [<c073ccf0>] ? byt_gpio_irq_handler+0xc0/0xc0 Sep 09 18:22:47 winbook kernel: [<c073f6f9>] _gpiod_direction_output_raw+0x59/0x1c0 Sep 09 18:22:47 winbook kernel: [<c073f8ca>] gpiod_direction_output+0x2a/0x50 Sep 09 18:22:47 winbook kernel: [<c04bc74b>] ? msleep+0x2b/0x40 Sep 09 18:22:47 winbook kernel: [<f935a87e>] goodix_reset+0x3e/0x90 [goodix_backport] Sep 09 18:22:47 winbook kernel: [<f935b1ae>] goodix_ts_probe+0x27e/0x5a0 [goodix_backport] Sep 09 18:22:47 winbook kernel: [<c090ea01>] i2c_device_probe+0x101/0x1b0 Sep 09 18:22:47 winbook kernel: [<c0613a05>] ? sysfs_create_link+0x25/0x50 Sep 09 18:22:47 winbook kernel: [<f935af30>] ? goodix_configure_dev+0x1e0/0x1e0 [goodix_backport] Which is the same error I had previously: https://lkml.org/lkml/2015/6/30/434 I was testing this on a Onda v975w, but I'm now testing it on a WinBook TW100. <snip> > +/* > + * ACPI table specifies gpio pins in this order: first rst pin and > + * then interrupt pin. > + */ > +static const struct dmi_system_id goodix_rst_pin_first[] = { > +#if defined(CONFIG_DMI) && defined(CONFIG_X86) > + { > + .ident = "WinBook TW100", > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), > + DMI_MATCH(DMI_PRODUCT_NAME, "TW100") > + } > + }, The DSDT for the WinBook one is here: https://people.gnome.org/~hadess/Winbook%20TW100%20DSDT.dsl For reference, the DSDT for the Onda, the tablet I tested this on some months ago: https://bugzilla.kernel.org/attachment.cgi?id=149331 Cheers -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
