Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- [PATCH 20/54] MAINTAINERS: Add file patterns for iio device tree bindings,
Geert Uytterhoeven
- [PATCH 0/3] iio: proximity: as3935: fix major drivers,
Matt Ranostay
- [PATCH 1/2 v7] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH] iio: humidity: hdc100x: correct humidity integration time mask,
Alison Schofield
- [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names,
Alison Schofield
- [PATCH 1/2] iio: generic_buffer: Cleanup when receiving signals,
Crestez Dan Leonard
- [PATCH] max44000: Remove scale from proximity,
Crestez Dan Leonard
- [PATCH v2 0/3] atlas-ph-sensor: add conductivity sensor support,
Matt Ranostay
- Drivers for Bitland Dual Accelerometer,
Lasse Schuirmann
- [RFC] iio: add driver for si114x ambient light / proximity sensors,
Crestez Dan Leonard
- [RFC] dynamic iio consumer channel mapping,
Matt Ranostay
- [PATCH] iio: adc: nau7802: Expose possible gains in sysfs,
Quentin Schulz
- [PATCH v2 0/7] iio: inv_mpu6050: Support i2c master and external readings,
Crestez Dan Leonard
- [PATCH] iio: adc: ti-ads1015: add datasheet names,
Matt Ranostay
- [PATCH] iio: Export I2C module alias information,
Javier Martinez Canillas
- [patch] iio: humidity: Remove a stray unlock,
Dan Carpenter
- Scale and FS range information (was: Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part),
Lucas De Marchi
- [PATCH v5 2/2] iio: accel: Add triggered buffer support for BMA220,
Tiberiu Breana
- [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part,
Matt Ranostay
- [PATCH] iio: light: jsa1212: remove unneeded i2c check functionality test,
Alison Schofield
- [PATCH] iio: triggers: Make trigger ops structure explicitly non optional.,
Jonathan Cameron
- [PATCH 1/3] iio: st_sensors: Init trigger before irq request,
Crestez Dan Leonard
- [PATCH] iio: potentiometer: tpl0102: remove unneeded i2c check functionality test,
Matt Ranostay
- [patch V4 26/31] iio: use parity32 in adxrs450, zengzhaoxiu
- [PATCH v2] iio: adc: ti-ads1015: add support for ADS1115 part,
Matt Ranostay
- [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- re: staging:iio:triggers introduce iio_trigger_ops to take const bits out of iio_trig_structure.,
Dan Carpenter
- [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part,
Matt Ranostay
- [PATCH 1/2] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH 1/2 v4] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH] iio: st_sensors: read surplus samples in trigger, Linus Walleij
- [PATCH v3] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH v2] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH] iio: st_sensors: switch to a threaded interrupt, Linus Walleij
- [PULL] IIO fixes for 4.6d (inv mpu6050 acpi regression),
Jonathan Cameron
- [PATCH v4 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- IIO trigger names are not actually unique,
Crestez Dan Leonard
- [PATCH] iio: light apds9960: Add the missing dev.parent,
Yong Li
- [PATCH v2] iio: pressure: bmp280: add humidity support,
Matt Ranostay
- [PATCH v9 0/9] i2c mux cleanup and locking update,
Peter Rosin
- [PATCH v9 8/9] [media] rtl2832_sdr: get rid of empty regmap wrappers, Peter Rosin
- [PATCH v9 9/9] [media] rtl2832: regmap is aware of lockdep, drop local locking hack, Peter Rosin
- [PATCH v9 7/9] [media] rtl2832: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 6/9] [media] si2168: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 4/9] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes, Peter Rosin
- [PATCH v9 5/9] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 2/9] i2c: muxes always lock the parent adapter, Peter Rosin
- [PATCH v9 3/9] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing, Peter Rosin
- [PATCH v9 1/9] i2c: allow adapter drivers to override the adapter locking, Peter Rosin
- Re: [PATCH v9 0/9] i2c mux cleanup and locking update, Wolfram Sang
- [RFC] Make the devm_iio_device_alloc call set iio_dev.dev.parent.,
Jonathan Cameron
- trigger->ops structure optional?,
Gwendal Grignou
- [RFC] iio: Add support for describing scan offsets in buffer ops,
Crestez Dan Leonard
- [PATCHv2] iio: Fix error handling in iio_trigger_attach_poll_func,
Crestez Dan Leonard
- [PATCH v4] iio: accel: Add support for Freescale MMA7660FC,
Constantin Musca
- [PATCH v2 00/10] Use the ISA bus driver for PC/104 and ISA devices,
William Breathitt Gray
- [PATCH v2 01/10] isa: Implement the module_isa_driver macro, William Breathitt Gray
- [PATCH v2 02/10] isa: Implement the max_num_isa_dev macro, William Breathitt Gray
- [PATCH v2 03/10] Documentation: Add ISA bus driver documentation, William Breathitt Gray
- [PATCH v2 04/10] iio: stx104: Add X86 dependency to STX104 Kconfig option, William Breathitt Gray
- [PATCH v2 05/10] iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros, William Breathitt Gray
- [PATCH v2 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 07/10] gpio: 104-dio-48e: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 08/10] gpio: 104-idi-48: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 09/10] gpio: 104-idio-16: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 10/10] gpio: ws16c48: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH 00/13] Rework for AFE440x drivers to prepare for AFE4405,
Andrew F. Davis
- [PATCH 05/13] iio: health/afe440x: Fix scan_index assignment, Andrew F. Davis
- [PATCH 07/13] iio: health/afe4404: Remove LED3 input channel, Andrew F. Davis
- [PATCH 10/13] iio: health/afe440x: Make gain settings a modifier for the stages, Andrew F. Davis
- [PATCH 09/13] iio: health/afe440x: Use regmap fields, Andrew F. Davis
- [PATCH 01/13] iio: health/afe440x: Fix kernel-doc format, Andrew F. Davis
- [PATCH 06/13] iio: health/afe440x: Remove unneeded offset handling, Andrew F. Davis
- [PATCH 11/13] iio: health/afe440x: Match LED currents to stages, Andrew F. Davis
- [PATCH 03/13] iio: health/afe440x: Remove unneeded initializers, Andrew F. Davis
- [PATCH 13/13] iio: health/afe4404: ENSEPGAIN is part of CONTROL2 register, Andrew F. Davis
- [PATCH 02/13] iio: health/afe440x: Remove of_match_ptr and ifdefs, Andrew F. Davis
- [PATCH 04/13] iio: health/afe440x: Always use separate gain values, Andrew F. Davis
- [PATCH 12/13] iio: health/afe440x: Remove unused definitions, Andrew F. Davis
- [PATCH 08/13] iio: health/afe440x: Remove channel names, Andrew F. Davis
- Re: [PATCH 00/13] Rework for AFE440x drivers to prepare for AFE4405, Jonathan Cameron
- [PATCH] iio: ak8975: Support adapters limited to BYTE_DATA, Crestez Dan Leonard
- [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings,
Crestez Dan Leonard
- [PATCH v3 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- [PATCH v2 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- [PATCH v3] iio: accel: Add support for Freescale MMA7660FC,
Constantin Musca
- [PATCH 0/3] mxs-lradc: Split driver into MFD,
Ksenija Stanojevic
- [PATCH 0/3] Add available sampling frequency and scale attributes,
Daniel Baluta
- [PATCH 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- [patch] iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels(),
Dan Carpenter
- [PATCH v2] iio: accel: Add support for Freescale MMA7660FC,
Constantin Musca
- [RFC] iio: Release irq if set_trigger_state fails,
Crestez Dan Leonard
- [PATCH -next] iio: pressure: bmp280: fix error message for wrong chip id,
Akinobu Mita
- [PATCH] iio: accel: Add support for Freescale MMA7660FC, Constantin Musca
- [PATCH] iio: light: bh1780: return after write,
Linus Walleij
- [PATCH] iio: inv_mpu6050: Do burst reads using spi/i2c directly, Crestez Dan Leonard
- re: iio: light: new driver for the ROHM BH1780, Dan Carpenter
- Regression in inv_mpu6050: 4.6.0-rc5,
One Thousand Gnomes
- [PATCH] iio: generic_buffer: add watermark logic, Doru Gucea
- [RFT PATCH] iio: magn: Add support for BMM150 magnetometer,
Daniel Baluta
- [PULL] Second set of new drivers, features and cleanups for IIO in the 4.7 cycle,
Jonathan Cameron
[PULL] Third set of IIO fixes in the 4.6 cycle.,
Jonathan Cameron
[PATCH v2 0/3] Introduce support for creating IIO devices via configfs,
Daniel Baluta
[PATCH] iio: mma8452: add support for oversampling ratio,
Martin Kepplinger
[PATCH 0/2] iio: chemical: atlas-ph-sensor: add conductivity sensor support,
Matt Ranostay
[PATCH v3 0/2] iio: pressure: bmp280: add support for BMP180 and oversampling rate control,
Akinobu Mita
[PATCH V3 0/3] iio: mxs-lradc: simplify TS handling,
Stefan Wahren
Nonlinear outputs,
Daniel Glöckner
[PATCH 0/3] mxs-lradc: Add support for current sources,
Harald Geyer
[patch] iio: light: apds9960: silence uninitialized variable warning,
Dan Carpenter
[PATCH] iio: tmp006: Set correct iio name,
Yong Li
[PATCH RFT V2 0/3] iio: mxs-lradc: implement PM ops,
Stefan Wahren
[PATCH] iio: bmg160: add callbacks for the filter frequency,
Steffen Trumtrar
bmg160 driver,
Patrick Doyle
[PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master,
Crestez Dan Leonard
[PATCH v1 0/3] iio sensor mounting matrix support,
Gregor Boirie
[RFC PATCH 0/3] Introduce support for creating IIO devices via configfs,
Daniel Baluta
[PATCH v7 00/24] i2c mux cleanup and locking update,
Peter Rosin
- [PATCH v7 01/24] i2c-mux: add common data for every i2c-mux instance, Peter Rosin
- [PATCH v7 07/24] i2c: i2c-mux-reg: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 05/24] i2c: i2c-mux-pca9541: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 04/24] i2c: i2c-arb-gpio-challenge: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 12/24] [media] si2168: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 14/24] of/unittest: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 06/24] i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 17/24] i2c: muxes always lock the parent adapter, Peter Rosin
- [PATCH v7 15/24] i2c-mux: drop old unused i2c-mux api, Peter Rosin
- [PATCH v7 18/24] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing, Peter Rosin
- [PATCH v7 19/24] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes, Peter Rosin
- [PATCH v7 24/24] [media] rtl2832: regmap is aware of lockdep, drop local locking hack, Peter Rosin
- [PATCH v7 23/24] [media] rtl2832_sdr: get rid of empty regmap wrappers, Peter Rosin
- [PATCH v7 21/24] [media] si2168: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v7 20/24] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking, Peter Rosin
- [PATCH v7 13/24] [media] cx231xx: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 02/24] i2c: i2c-mux-gpio: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 11/24] [media] rtl2832: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 10/24] [media] rtl2830: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 03/24] i2c: i2c-mux-pinctrl: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 09/24] [media] m88ds3103: convert to use an explicit i2c mux core, Peter Rosin
- [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked, Peter Rosin
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update, Wolfram Sang
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update, Antti Palosaari
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update, Crestez Dan Leonard
- <Possible follow-ups>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update, Peter Rosin
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update, Peter Rosin
[PATCH 0/5] iio: inv_mpu6050: Cleanup chip types and add mpu9150,
Crestez Dan Leonard
[RFC v2] iio: st_sensors: Add lsm9ds0-accel and lsm9ds0-magn support, Crestez Dan Leonard
[PATCH] iio: st_gyro: Add lsm9ds0-gyro support,
Crestez Dan Leonard
[RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor,
Gregor Boirie
- [RFC PATCH v1 1/9] iio:st_pressure:initial lps22hb sensor support, Gregor Boirie
- [RFC PATCH v1 2/9] iio:st_pressure: fix sampling gains, Gregor Boirie
- [RFC PATCH v1 3/9] iio:st_pressure: lps22hb temperature support, Gregor Boirie
- [RFC PATCH v1 4/9] iio:st_sensors: align on storagebits boundaries, Gregor Boirie
- [RFC PATCH v1 5/9] iio:st_pressure: align storagebits on power of 2, Gregor Boirie
- [RFC PATCH v1 6/9] iio:st_pressure: temperature triggered buffering, Gregor Boirie
- [RFC PATCH v1 7/9] iio:st_sensors: unexport st_sensors_get_buffer_element, Gregor Boirie
- [RFC PATCH v1 8/9] iio:st_sensors: emulate SMBus block read if needed, Gregor Boirie
- [RFC PATCH v1 9/9] iio:st_sensors: fix power regulator usage, Gregor Boirie
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor, Linus Walleij
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor, Jonathan Cameron
[PATCH V4 1/2] thermal: generic-adc: Add DT binding for ADC based thermal sensor,
Laxman Dewangan
[PATCH] iio:adc:at91-sama5d2: Repair crash on module removal,
Marek Vasut
Driver directory selection for Power Supply Status chip,
Thor Thayer
Re: hid-sensor-hub.c for pci device 9d35?,
Pandruvada, Srinivas
[PATCH v3 0/2] Add support for Aosong AM2315 relative humidity and ambient temperature sensor,
Tiberiu Breana
[PATCH v3 0/5] Support for max44000 Ambient and Infrared Proximity Sensor,
Crestez Dan Leonard
hid-sensor-hub as pci device 9d35?, Axel Kittenberger
[PATCH V4] iio: pressure: hp03: Add Hope RF HP03 sensor support,
Marek Vasut
[PATCH v2 0/2] Add support for Aosong AM2315 relative humidity and ambient temperature sensor,
Tiberiu Breana
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]