Linux IDE Archive
Thread Index
[
Prev Page
][
Next Page
]
Re: linux: sata_nv: adma support
From
: Pali Rohár
Re: [PATCH v3 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64
From
: LABBE Corentin
Re: [PATCH v3 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64
From
: Russell King - ARM Linux
Re: [PATCH v3 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64
From
: LABBE Corentin
[PATCH] ata: Fix racy link clearance
From
: Takashi Iwai
Re: [PATCH v3 1/4] Allow system to allocate IRQ 0 to ATA devices
From
: Sergei Shtylyov
RE: [PATCH v3 1/4] Allow system to allocate IRQ 0 to ATA devices
From
: Guo, Chaohong
Re: [PATCH] ata: sata_highbank: Convert to use GPIO descriptors
From
: Rob Herring
[PATCH] ata: sata_highbank: Convert to use GPIO descriptors
From
: Linus Walleij
[PATCH] ata: pxa: Drop <linux/gpio.h> include
From
: Linus Walleij
[PATCH] ata: palmld: Convert to GPIO descriptors
From
: Linus Walleij
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
[PATCH v6 RESEND] scsi: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: remove the legacy BLKPREP_* values
From
: Jens Axboe
Re: [PATCH 7/7] block: remove the BLKPREP_* values.
From
: Bart Van Assche
Re: [PATCH 6/7] scsi: return blk_status_t from device handler ->prep_fn
From
: Bart Van Assche
Re: [PATCH 5/7] scsi: return blk_status_t from scsi_init_io and ->init_command
From
: Bart Van Assche
Re: [PATCH 5/7] scsi: return blk_status_t from scsi_init_io and ->init_command
From
: Bart Van Assche
Re: [PATCH 4/7] scsi: clean up error handling in scsi_init_io
From
: Bart Van Assche
Re: [PATCH 3/7] scsi: push blk_status_t up into scsi_setup_{fs,scsi}_cmnd
From
: Bart Van Assche
Re: [PATCH 2/7] scsi: simplify scsi_prep_state_check
From
: Bart Van Assche
Re: [PATCH 1/7] ide: cleanup ->prep_rq calling convention
From
: Bart Van Assche
Re: remove the legacy BLKPREP_* values
From
: Jens Axboe
Re: [PATCH 7/7] block: remove the BLKPREP_* values.
From
: Johannes Thumshirn
Re: [PATCH 6/7] scsi: return blk_status_t from device handler ->prep_fn
From
: Johannes Thumshirn
Re: [PATCH 5/7] scsi: return blk_status_t from scsi_init_io and ->init_command
From
: Johannes Thumshirn
Re: [PATCH 4/7] scsi: clean up error handling in scsi_init_io
From
: Johannes Thumshirn
Re: [PATCH 3/7] scsi: push blk_status_t up into scsi_setup_{fs,scsi}_cmnd
From
: Johannes Thumshirn
[PATCH 7/7] block: remove the BLKPREP_* values.
From
: Christoph Hellwig
[PATCH 6/7] scsi: return blk_status_t from device handler ->prep_fn
From
: Christoph Hellwig
[PATCH 5/7] scsi: return blk_status_t from scsi_init_io and ->init_command
From
: Christoph Hellwig
[PATCH 4/7] scsi: clean up error handling in scsi_init_io
From
: Christoph Hellwig
[PATCH 3/7] scsi: push blk_status_t up into scsi_setup_{fs,scsi}_cmnd
From
: Christoph Hellwig
[PATCH 2/7] scsi: simplify scsi_prep_state_check
From
: Christoph Hellwig
[PATCH 1/7] ide: cleanup ->prep_rq calling convention
From
: Christoph Hellwig
remove the legacy BLKPREP_* values
From
: Christoph Hellwig
Re: [PATCH 09/30] scsi: kill off the legacy IO path
From
: Jens Axboe
Re: [PATCH 09/30] scsi: kill off the legacy IO path
From
: Martin K. Petersen
Re: [PATCH] sata_rcar: convert to SPDX identifiers
From
: Jens Axboe
[PATCH] sata_rcar: convert to SPDX identifiers
From
: Kuninori Morimoto
Re: [PATCH] MAINTAINERS: Fix remaining pointers to obsolete libata.git
From
: Jens Axboe
Re: [PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 2/4] fix an IRQ0 interrupt issue in arasan pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 4/4] fix an IRQ0 interrupt issue in ixp4xxx pata driver
From
: Sergei Shtylyov
[PATCH] MAINTAINERS: Fix remaining pointers to obsolete libata.git
From
: Geert Uytterhoeven
Re: [PATCH 09/30] scsi: kill off the legacy IO path
From
: Jens Axboe
Re: [PATCH 09/30] scsi: kill off the legacy IO path
From
: Martin K. Petersen
Re: [PATCH 08/30] scsi: provide mq_ops->busy() hook
From
: Martin K. Petersen
Re: [PATCH v3 1/4] Allow system to allocate IRQ 0 to ATA devices
From
: Sergei Shtylyov
Re: [PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 4/4] fix an IRQ0 interrupt issue in ixp4xxx pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 2/4] fix an IRQ0 interrupt issue in arasan pata driver
From
: Sergei Shtylyov
Re: [PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Bartlomiej Zolnierkiewicz
[PATCH v3 4/4] fix an IRQ0 interrupt issue in ixp4xxx pata driver
From
: Chaohong guo
[PATCH v3 3/4] fix an IRQ0 interrupt issue in falcon pata driver
From
: Chaohong guo
[PATCH v3 2/4] fix an IRQ0 interrupt issue in arasan pata driver
From
: Chaohong guo
[PATCH v3 1/4] Allow system to allocate IRQ 0 to ATA devices
From
: Chaohong guo
RE: [PATCH libata v2] Allow system to allocate IRQ 0 to ATA devices
From
: Guo, Chaohong
Re: [PATCH libata v2] Allow system to allocate IRQ 0 to ATA devices
From
: Sergei Shtylyov
[PATCH libata v2] Allow system to allocate IRQ 0 to ATA devices
From
: Chaohong guo
Re: [PATCH 21/30] block: remove dead elevator code
From
: Jens Axboe
Re: [PATCH 09/30] scsi: kill off the legacy IO path
From
: Jens Axboe
Re: [PATCHSET v3 0/30] blk-mq driver conversions and legacy path removal
From
: Omar Sandoval
Re: [PATCH 21/30] block: remove dead elevator code
From
: Omar Sandoval
Re: [PATCH 09/30] scsi: kill off the legacy IO path
From
: Omar Sandoval
Re: [PATCHSET v3 0/30] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCH] ata: add Buddha PATA controller driver
From
: John Paul Adrian Glaubitz
Re: [PATCH] ata: add Buddha PATA controller driver
From
: Michael Schmitz
Re: [PATCHSET v3 0/30] blk-mq driver conversions and legacy path removal
From
: Ming Lei
[PATCH 30/30] block: get rid of q->softirq_done_fn()
From
: Jens Axboe
[PATCH 29/30] block: get rid of blk_queued_rq()
From
: Jens Axboe
[PATCH 28/30] blk-merge: kill dead queue lock held check
From
: Jens Axboe
[PATCH 27/30] block: remove req_no_special_merge() from merging code
From
: Jens Axboe
[PATCH 26/30] block: kill request slab cache
From
: Jens Axboe
[PATCH 25/30] block: remove request_list code
From
: Jens Axboe
[PATCH 24/30] bsg: move bsg-lib parts outside of request queue
From
: Jens Axboe
[PATCH 23/30] block: kill legacy parts of timeout handling
From
: Jens Axboe
[PATCH 20/30] block: remove legacy IO schedulers
From
: Jens Axboe
[PATCH 21/30] block: remove dead elevator code
From
: Jens Axboe
[PATCH 22/30] block: remove __blk_put_request()
From
: Jens Axboe
[PATCH 19/30] block: remove non mq parts from the flush code
From
: Jens Axboe
[PATCH 18/30] block: remove legacy rq tagging
From
: Jens Axboe
[PATCH 17/30] blk-cgroup: remove legacy queue bypassing
From
: Jens Axboe
[PATCH 16/30] blk-wbt: kill check for legacy queue type
From
: Jens Axboe
[PATCH 15/30] block: remove blk_complete_request()
From
: Jens Axboe
[PATCH 14/30] bsg: convert to use blk-mq
From
: Jens Axboe
[PATCH 13/30] bsg: provide bsg_remove_queue() helper
From
: Jens Axboe
[PATCH 12/30] bsg: pass in desired timeout handler
From
: Jens Axboe
[PATCH 11/30] dasd: remove dead code
From
: Jens Axboe
[PATCH 09/30] scsi: kill off the legacy IO path
From
: Jens Axboe
[PATCH 10/30] block: remove q->lld_busy_fn()
From
: Jens Axboe
[PATCH 08/30] scsi: provide mq_ops->busy() hook
From
: Jens Axboe
[PATCH 07/30] blk-mq: provide mq_ops->busy() hook
From
: Jens Axboe
[PATCH 06/30] blk-mq: remove legacy check in queue blk_freeze_queue()
From
: Jens Axboe
[PATCH 05/30] blk-mq: remove the request_list usage
From
: Jens Axboe
[PATCH 04/30] ide: convert to blk-mq
From
: Jens Axboe
[PATCH 03/30] mspro_block: convert to blk-mq
From
: Jens Axboe
[PATCH 02/30] ms_block: convert to blk-mq
From
: Jens Axboe
[PATCH 01/30] sunvdc: convert to blk-mq
From
: Jens Axboe
[PATCHSET v3 0/30] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCH] ata: add Buddha PATA controller driver
From
: John Paul Adrian Glaubitz
RE: [PATCH] Allow system to allocate IRQ 0 to ATA devices
From
: Guo, Chaohong
[PATCH v6] scsi: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Ming Lei
Re: [PATCH] Allow system to allocate IRQ 0 to ATA devices
From
: Sergei Shtylyov
Re: [PATCH 24/29] bsg: move bsg-lib parts outside of request queue
From
: Hannes Reinecke
Re: [PATCH 14/29] bsg: convert to use blk-mq
From
: Hannes Reinecke
Re: [PATCH 13/29] bsg: provide bsg_remove_queue() helper
From
: Hannes Reinecke
Re: [PATCH 10/29] block: remove q->lld_busy_fn()
From
: Hannes Reinecke
Re: [PATCH 08/29] scsi: provide mq_ops->busy() hook
From
: Hannes Reinecke
Re: [PATCH 07/29] blk-mq: provide mq_ops->busy() hook
From
: Hannes Reinecke
[PATCH 29/29] block: get rid of blk_queued_rq()
From
: Jens Axboe
[PATCH 28/29] blk-merge: kill dead queue lock held check
From
: Jens Axboe
[PATCH 27/29] block: remove req_no_special_merge() from merging code
From
: Jens Axboe
[PATCH 25/29] block: remove request_list code
From
: Jens Axboe
[PATCH 24/29] bsg: move bsg-lib parts outside of request queue
From
: Jens Axboe
[PATCH 26/29] block: kill request slab cache
From
: Jens Axboe
[PATCH 23/29] block: kill legacy parts of timeout handling
From
: Jens Axboe
[PATCH 21/29] block: remove dead elevator code
From
: Jens Axboe
[PATCH 20/29] block: remove legacy IO schedulers
From
: Jens Axboe
[PATCH 22/29] block: remove __blk_put_request()
From
: Jens Axboe
[PATCH 16/29] blk-wbt: kill check for legacy queue type
From
: Jens Axboe
[PATCH 19/29] block: remove non mq parts from the flush code
From
: Jens Axboe
[PATCH 18/29] block: remove legacy rq tagging
From
: Jens Axboe
[PATCH 17/29] blk-cgroup: remove legacy queue bypassing
From
: Jens Axboe
[PATCH 15/29] block: remove blk_complete_request()
From
: Jens Axboe
[PATCH 14/29] bsg: convert to use blk-mq
From
: Jens Axboe
[PATCH 13/29] bsg: provide bsg_remove_queue() helper
From
: Jens Axboe
[PATCH 12/29] bsg: pass in desired timeout handler
From
: Jens Axboe
[PATCH 11/29] dasd: remove dead code
From
: Jens Axboe
[PATCH 10/29] block: remove q->lld_busy_fn()
From
: Jens Axboe
[PATCH 09/29] scsi: kill off the legacy IO path
From
: Jens Axboe
[PATCH 08/29] scsi: provide mq_ops->busy() hook
From
: Jens Axboe
[PATCH 07/29] blk-mq: provide mq_ops->busy() hook
From
: Jens Axboe
[PATCH 06/29] blk-mq: remove legacy check in queue blk_freeze_queue()
From
: Jens Axboe
[PATCH 05/29] blk-mq: remove the request_list usage
From
: Jens Axboe
[PATCH 04/29] ide: convert to blk-mq
From
: Jens Axboe
[PATCH 03/29] mspro_block: convert to blk-mq
From
: Jens Axboe
[PATCH 02/29] ms_block: convert to blk-mq
From
: Jens Axboe
[PATCH 01/29] sunvdc: convert to blk-mq
From
: Jens Axboe
[PATCHSET v2 0/29] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCH 23/28] block: kill lld busy
From
: Jens Axboe
Re: [PATCH 23/28] block: kill lld busy
From
: Mike Snitzer
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Ming Lei
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCH 16/28] blk-cgroup: remove legacy queue bypassing
From
: Jens Axboe
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCH 23/28] block: kill lld busy
From
: Jens Axboe
Re: [PATCH 16/28] blk-cgroup: remove legacy queue bypassing
From
: Johannes Thumshirn
Re: [PATCH 16/28] blk-cgroup: remove legacy queue bypassing
From
: Jens Axboe
Re: [PATCH 09/28] dm: remove legacy IO path
From
: Jens Axboe
Re: [PATCH 12/28] bsg: provide bsg_remove_queue() helper
From
: Jens Axboe
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Ming Lei
Re: [PATCH 16/28] blk-cgroup: remove legacy queue bypassing
From
: Johannes Thumshirn
Re: [PATCH 12/28] bsg: provide bsg_remove_queue() helper
From
: Johannes Thumshirn
Re: [PATCH 28/28] block: get rid of blk_queued_rq()
From
: Hannes Reinecke
Re: [PATCH 27/28] blk-merge: kill dead queue lock held check
From
: Hannes Reinecke
Re: [PATCH 26/28] block: remove req_no_special_merge() from merging code
From
: Hannes Reinecke
Re: [PATCH 25/28] block: kill request slab cache
From
: Hannes Reinecke
Re: [PATCH 24/28] block: remove request_list code
From
: Hannes Reinecke
Re: [PATCH 23/28] block: kill lld busy
From
: Hannes Reinecke
Re: [PATCH 22/28] block: kill legacy parts of timeout handling
From
: Hannes Reinecke
Re: [PATCH 21/28] block: remove __blk_put_request()
From
: Hannes Reinecke
Re: [PATCH 18/28] block: remove non mq parts from the flush code
From
: Hannes Reinecke
Re: [PATCH 17/28] block: remove legacy rq tagging
From
: Hannes Reinecke
Re: [PATCH 16/28] blk-cgroup: remove legacy queue bypassing
From
: Hannes Reinecke
Re: [PATCH 15/28] blk-wbt: kill check for legacy queue type
From
: Hannes Reinecke
Re: [PATCH 14/28] block: remove blk_complete_request()
From
: Hannes Reinecke
Re: [PATCH 13/28] bsg: convert to use blk-mq
From
: Hannes Reinecke
Re: [PATCH 12/28] bsg: provide bsg_remove_queue() helper
From
: Hannes Reinecke
Re: [PATCH 11/28] bsg: pass in desired timeout handler
From
: Hannes Reinecke
Re: [PATCH 10/28] dasd: remove dead code
From
: Hannes Reinecke
Re: [PATCH 09/28] dm: remove legacy IO path
From
: Hannes Reinecke
Re: [PATCH 08/28] scsi: kill off the legacy IO path
From
: Hannes Reinecke
RE: [PATCH] Allow system to allocate IRQ 0 to ATA devices
From
: Guo, Chaohong
Re: [PATCH 13/28] bsg: convert to use blk-mq
From
: Jens Axboe
Re: [PATCH 11/28] bsg: pass in desired timeout handler
From
: Jens Axboe
[PATCH] Malformatted switch statment
From
: Joris Gutjahr
Re: [PATCH 13/28] bsg: convert to use blk-mq
From
: Christoph Hellwig
Re: [PATCH 12/28] bsg: provide bsg_remove_queue() helper
From
: Christoph Hellwig
Re: [PATCH 11/28] bsg: pass in desired timeout handler
From
: Christoph Hellwig
Re: [PATCH 04/28] ide: convert to blk-mq
From
: Jens Axboe
Re: [PATCH 07/28] blk-mq: remove legacy check in queue blk_freeze_queue()
From
: Hannes Reinecke
Re: [PATCH 06/28] blk-mq: remove the request_list usage
From
: Hannes Reinecke
Re: [PATCH 04/28] ide: convert to blk-mq
From
: Hannes Reinecke
Re: [PATCH 03/28] mspro_block: convert to blk-mq
From
: Hannes Reinecke
Re: [PATCH 02/28] ms_block: convert to blk-mq
From
: Hannes Reinecke
Re: [PATCH 01/28] sunvdc: convert to blk-mq
From
: Hannes Reinecke
Re: [PATCH 05/28] IB/srp: remove old request_fn_active check
From
: Bart Van Assche
Re: [PATCH 05/28] IB/srp: remove old request_fn_active check
From
: Jens Axboe
Re: [PATCH 05/28] IB/srp: remove old request_fn_active check
From
: Hannes Reinecke
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Bart Van Assche
Re: [PATCH 08/28] scsi: kill off the legacy IO path
From
: Madhani, Himanshu
Re: [PATCH 08/28] scsi: kill off the legacy IO path
From
: Jens Axboe
Re: [PATCH 08/28] scsi: kill off the legacy IO path
From
: Madhani, Himanshu
Re: [PATCH 23/28] block: kill lld busy
From
: Jens Axboe
Re: [PATCH 08/28] scsi: kill off the legacy IO path
From
: Jens Axboe
Re: [PATCH 23/28] block: kill lld busy
From
: Bart Van Assche
Re: [PATCH 08/28] scsi: kill off the legacy IO path
From
: Bart Van Assche
Re: [PATCH 05/28] IB/srp: remove old request_fn_active check
From
: Jens Axboe
Re: [PATCH 05/28] IB/srp: remove old request_fn_active check
From
: Bart Van Assche
[PATCH 28/28] block: get rid of blk_queued_rq()
From
: Jens Axboe
[PATCH 27/28] blk-merge: kill dead queue lock held check
From
: Jens Axboe
[PATCH 26/28] block: remove req_no_special_merge() from merging code
From
: Jens Axboe
[PATCH 22/28] block: kill legacy parts of timeout handling
From
: Jens Axboe
[PATCH 24/28] block: remove request_list code
From
: Jens Axboe
[PATCH 25/28] block: kill request slab cache
From
: Jens Axboe
[PATCH 23/28] block: kill lld busy
From
: Jens Axboe
[PATCH 19/28] block: remove legacy IO schedulers
From
: Jens Axboe
[PATCH 20/28] block: remove dead elevator code
From
: Jens Axboe
[PATCH 21/28] block: remove __blk_put_request()
From
: Jens Axboe
[PATCH 18/28] block: remove non mq parts from the flush code
From
: Jens Axboe
[PATCH 17/28] block: remove legacy rq tagging
From
: Jens Axboe
[PATCH 16/28] blk-cgroup: remove legacy queue bypassing
From
: Jens Axboe
[PATCH 15/28] blk-wbt: kill check for legacy queue type
From
: Jens Axboe
[PATCH 14/28] block: remove blk_complete_request()
From
: Jens Axboe
[PATCH 13/28] bsg: convert to use blk-mq
From
: Jens Axboe
[PATCH 12/28] bsg: provide bsg_remove_queue() helper
From
: Jens Axboe
[PATCH 11/28] bsg: pass in desired timeout handler
From
: Jens Axboe
[PATCH 10/28] dasd: remove dead code
From
: Jens Axboe
[PATCH 09/28] dm: remove legacy IO path
From
: Jens Axboe
[PATCH 08/28] scsi: kill off the legacy IO path
From
: Jens Axboe
[PATCH 07/28] blk-mq: remove legacy check in queue blk_freeze_queue()
From
: Jens Axboe
[PATCH 06/28] blk-mq: remove the request_list usage
From
: Jens Axboe
[PATCH 05/28] IB/srp: remove old request_fn_active check
From
: Jens Axboe
[PATCH 04/28] ide: convert to blk-mq
From
: Jens Axboe
[PATCH 03/28] mspro_block: convert to blk-mq
From
: Jens Axboe
[PATCH 01/28] sunvdc: convert to blk-mq
From
: Jens Axboe
[PATCH 02/28] ms_block: convert to blk-mq
From
: Jens Axboe
[PATCHSET 0/28] blk-mq driver conversions and legacy path removal
From
: Jens Axboe
Re: [PATCH] ata: add Buddha PATA controller driver
From
: John Paul Adrian Glaubitz
Re: [PATCH] Allow system to allocate IRQ 0 to ATA devices
From
: Sergei Shtylyov
[PATCH] Allow system to allocate IRQ 0 to ATA devices
From
: Chaohong guo
Re: [PATCH v3 2/7] include: add setbits_leXX/clrbits_leXX/clrsetbits_leXX in linux/setbits.h
From
: Jakub Kicinski
Re: [PATCH v3 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64
From
: Russell King - ARM Linux
Re: [PATCH v3 4/7] ata: ahci_sunxi: use xxxsetbitsi_le32 functions
From
: Sergei Shtylyov
[PATCH v3 4/7] ata: ahci_sunxi: use xxxsetbitsi_le32 functions
From
: Corentin Labbe
[PATCH v3 6/7] drm: meson: use xxxsetbits_le32
From
: Corentin Labbe
[PATCH v3 7/7] net: stmmac: dwmac-meson8b: use xxxsetbits_le32
From
: Corentin Labbe
[PATCH v3 5/7] net: ethernet: stmmac: dwmac-sun8i: use xxxsetbits_le32
From
: Corentin Labbe
[PATCH v3 3/7 DONOTMERGE] coccinelle: add xxxsetbits_leXX converting spatch
From
: Corentin Labbe
[PATCH v3 1/7] powerpc: rename setbits32/clrbits32 to setbits_be32/clrbits_be32
From
: Corentin Labbe
[PATCH v3 2/7] include: add setbits_leXX/clrbits_leXX/clrsetbits_leXX in linux/setbits.h
From
: Corentin Labbe
[PATCH v3 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64
From
: Corentin Labbe
[GIT PULL] libata changes for 4.20
From
: Jens Axboe
[PATCH 1/1] ata: pata_samsung_cf: simplify getting .driver_data
From
: Wolfram Sang
[PATCH 0/1] ata: simplify getting .driver_data
From
: Wolfram Sang
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
[PATCH v2] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
From
: Nathan Chancellor
Re: [PATCH] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
From
: kbuild test robot
Re: [PATCH] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
From
: Bart Van Assche
[PATCH] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
From
: Nathan Chancellor
Re: [PATCH] ata: add Buddha PATA controller driver
From
: Michael Schmitz
Re: [PATCH] ata: add Buddha PATA controller driver
From
: Michael Schmitz
Re: [PATCH] ata: add Buddha PATA controller driver
From
: Geert Uytterhoeven
Re: [PATCH] ata: add Buddha PATA controller driver
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH] ata: add Buddha PATA controller driver
From
: Christoph Hellwig
Re: [PATCH] ata: add Buddha PATA controller driver
From
: John Paul Adrian Glaubitz
[PATCH] ata: add Buddha PATA controller driver
From
: Bartlomiej Zolnierkiewicz
Re: [smartmontools-support] [PATCH v5] scsi: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
Re: [PATCH v5] scsi: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCH] ata: remove redundant 'default n' from Kconfig
From
: Jens Axboe
[PATCH] ata: remove redundant 'default n' from Kconfig
From
: Bartlomiej Zolnierkiewicz
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
Re: [PATCH v5] scsi: Add hwmon support for SMART temperature sensors
From
: Hannes Reinecke
[PATCH v5] scsi: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: Problem report - failed TRUSTED RECEIVE DMA
From
: Alex
Re: [PATCH 8/9] ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
From
: Florian Fainelli
Re: [PATCH 9/9] ARM: bcm63138: Enable SATA AHCI and PHY
From
: Florian Fainelli
Re: [PATCH] ata: ep93xx: Use proper enums for directions
From
: Jens Axboe
Re: [PATCH] ata: ep93xx: Use proper enums for directions
From
: Bartlomiej Zolnierkiewicz
[PATCH] ata: ep93xx: Use proper enums for directions
From
: Nathan Chancellor
Re: [PATCH v2 0/4] AHCI support for BCM63138
From
: Jens Axboe
[PATCH v2 1/4] dt-bindings: ata: Document BCM63138 compatible string
From
: Florian Fainelli
[PATCH v2 2/4] ata: ahci_brcm: Allow optional reset controller to be used
From
: Florian Fainelli
[PATCH v2 4/4] ata: ahci_brcm: Allow using driver or DSL SoCs
From
: Florian Fainelli
[PATCH v2 3/4] ata: ahci_brcm: Match BCM63138 compatible strings
From
: Florian Fainelli
[PATCH v2 0/4] AHCI support for BCM63138
From
: Florian Fainelli
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Florian Fainelli
[PATCH] ata_piix: remove open-coded dmi_match(DMI_OEM_STRING)
From
: Michał Mirosław
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Jens Axboe
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Tejun Heo
Re: Fwd: Kernel spamming errors to log file at about 1.2 MB per second, rendering my system inoperable
From
: Tejun Heo
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Florian Fainelli
Fwd: Kernel spamming errors to log file at about 1.2 MB per second, rendering my system inoperable
From
: Linus Torvalds
Re: [PATCH] ata: add Amiga Gayle PATA controller driver
From
: John Paul Adrian Glaubitz
Re: [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: LABBE Corentin
Re: [PATCH v2 1/7] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be
From
: LABBE Corentin
Re: [PATCH 2/2] ARM: mvebu: Enable ARCH_WANT_LIBATA_LEDS in Armada 38x
From
: Aditya Prayoga
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Florian Fainelli
Re: [PATCH v2 7/7] net: stmmac: dwmac-meson8b: use xxxsetbits32
From
: Neil Armstrong
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Kishon Vijay Abraham I
Re: [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: Christophe LEROY
Re: [PATCH v2 1/7] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be
From
: Christophe LEROY
Re: libata-core WARNING during boot
From
: Randy Dunlap
Re: libata-core WARNING during boot
From
: Jens Axboe
Re: [PATCH v2 7/7] net: stmmac: dwmac-meson8b: use xxxsetbits32
From
: Florian Fainelli
Re: [PATCH v2 7/7] net: stmmac: dwmac-meson8b: use xxxsetbits32
From
: Neil Armstrong
Re: [PATCH v2 6/7] drm: meson: use xxxsetbits32
From
: Neil Armstrong
[PATCH v2 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64
From
: Corentin Labbe
[PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: Corentin Labbe
[PATCH v2 1/7] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be
From
: Corentin Labbe
[PATCH v2 4/7] ata: ahci_sunxi: use xxxsetbits32 functions
From
: Corentin Labbe
[PATCH v2 5/7] net: ethernet: stmmac: dwmac-sun8i: use xxxsetbits32
From
: Corentin Labbe
[PATCH v2 7/7] net: stmmac: dwmac-meson8b: use xxxsetbits32
From
: Corentin Labbe
[PATCH v2 6/7] drm: meson: use xxxsetbits32
From
: Corentin Labbe
[PATCH v2 3/7] coccinelle: add xxxsetbitsXX converting spatch
From
: Corentin Labbe
libata-core WARNING during boot
From
: Randy Dunlap
Re: [PATCH 1/2] libata: add ledtrig support
From
: Daniel Golle
Re: [PATCH 1/2] libata: add ledtrig support
From
: Pavel Machek
Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Florian Fainelli
[PATCH 6/9] ata: ahci_brcm: Match BCM63138 compatible strings
From
: Florian Fainelli
[PATCH 5/9] ata: ahci_brcm: Allow optional reset controller to be used
From
: Florian Fainelli
[PATCH 3/9] phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
From
: Florian Fainelli
[PATCH 4/9] dt-bindings: ata: Document BCM63138 compatible string
From
: Florian Fainelli
[PATCH 2/9] phy: broadcom: allow PHY_BRCM_SATA driver to be built for DSL SoCs
From
: Florian Fainelli
[PATCH 6/9] ata: ahci_brcmstb: Match 63138 compatible strings
From
: Florian Fainelli
[PATCH 9/9] ARM: bcm63138: Enable SATA AHCI and PHY
From
: Florian Fainelli
[PATCH 8/9] ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
From
: Florian Fainelli
[PATCH 7/9] ata: ahci_brcm: Allow using driver or DSL SoCs
From
: Florian Fainelli
[PATCH 5/9] ata: sata_brcmstb: Allow optional reset controller to be used
From
: Florian Fainelli
[PATCH 2/9] phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
From
: Florian Fainelli
[PATCH 1/9] dt-bindings: phy: Document BCM63138 compatible string
From
: Florian Fainelli
[PATCH 0/9] AHCI and SATA PHY support for BCM63138
From
: Florian Fainelli
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Jens Axboe
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Sergei Shtylyov
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Jens Axboe
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Sergei Shtylyov
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Sergei Shtylyov
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Jens Axboe
Re: [PATCH] libata: mask swap internal and hardware tag
From
: Sergei Shtylyov
[PATCH] libata: mask swap internal and hardware tag
From
: Jens Axboe
Re: [PATCH 1/2] libata: add ledtrig support
From
: Aditya Prayoga
Re: [PATCH 1/2] libata: add ledtrig support
From
: Daniel Golle
Re: [PATCH 2/2] ARM: mvebu: Enable ARCH_WANT_LIBATA_LEDS in Armada 38x
From
: Pavel Machek
Re: [PATCH 1/2] libata: add ledtrig support
From
: Pavel Machek
[PATCH] libata: fix semicolon.cocci warnings
From
: kbuild test robot
Re: [PATCH 1/2] libata: add ledtrig support
From
: kbuild test robot
Re: [PATCH 1/2] libata: add ledtrig support
From
: kbuild test robot
Re: [PATCH 1/2] libata: add ledtrig support
From
: Andrew Lunn
[PATCH 2/2] ARM: mvebu: Enable ARCH_WANT_LIBATA_LEDS in Armada 38x
From
: Aditya Prayoga
[PATCH 1/2] libata: add ledtrig support
From
: Aditya Prayoga
[PATCH 0/2] Add support per ATA port ledtrigger on armada 38x
From
: Aditya Prayoga
Re: [PATCH 4/5] scsi: libsas: check the ata device status by ata_dev_enabled()
From
: Jason Yan
Re: [PATCH 4/5] scsi: libsas: check the ata device status by ata_dev_enabled()
From
: John Garry
Re: [PATCH] IDE: ide-dma: fix coding style issues with spaces
From
: David Miller
[PATCH] IDE: ide-dma: fix coding style issues with spaces
From
: Romain Aviolat
Re: [PATCH v4] libata: Add hwmon support for SMART temperature sensors
From
: Douglas Gilbert
Re: [PATCH v4] libata: Add hwmon support for SMART temperature sensors
From
: James Bottomley
[PATCH v4] libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: Subsystem responsible for /proc/diskstats timings?
From
: Omar Sandoval
[PATCH v2 07/17] compat_ioctl: move tape handling into drivers
From
: Arnd Bergmann
Re: [PATCH] pata_atiixp: Remove unnecessary parentheses
From
: Jens Axboe
Re: [PATCH] pata_atiixp: Remove unnecessary parentheses
From
: Nick Desaulniers
[PATCH] pata_atiixp: Remove unnecessary parentheses
From
: Nathan Chancellor
Re: [PATCH 11/11] compat_ioctl: move tape handling into drivers
From
: Arnd Bergmann
Re: [PATCH 11/11] compat_ioctl: move tape handling into drivers
From
: Arnd Bergmann
Re: [PATCH 2/5] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: LABBE Corentin
Re: [PATCH 1/5] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be
From
: LABBE Corentin
Re: [PATCH 2/5] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: LABBE Corentin
Re: [PATCH v5 7/9] dt-bindings: ata: update ahci_sunxi bindings
From
: Rob Herring
Re: [PATCH v5 5/9] dt-bindings: ata: ahci-platform: document phy-supply
From
: Rob Herring
Re: [PATCH v5 1/9] dt-bindings: ata: ahci-platform: fix indentation of target-supply
From
: Rob Herring
Re: [PATCH 0/5] introduce setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 functions
From
: Christophe LEROY
Re: [PATCH 2/5] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: Christophe LEROY
Re: [PATCH 1/5] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be
From
: Christophe LEROY
Re: [PATCH RFC 3/5] coccinelle: add xxxsetbitsXX converting spatch
From
: SF Markus Elfring
Subsystem responsible for /proc/diskstats timings?
From
: Klaus Kusche
Re: [PATCH 11/11] compat_ioctl: move tape handling into drivers
From
: Al Viro
[PATCH 11/11] compat_ioctl: move tape handling into drivers
From
: Arnd Bergmann
Re: [PATCH 0/5] introduce setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 functions
From
: David Miller
Re: [PATCH 2/5] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: Scott Wood
[PATCH 2/5] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
From
: Corentin Labbe
[PATCH 1/5] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be
From
: Corentin Labbe
[PATCH 5/5] ata: ahci_sunxi: use xxxsetbits32 functions
From
: Corentin Labbe
[PATCH 4/5] net: ethernet: stmmac: use xxxsetbits32
From
: Corentin Labbe
[PATCH RFC 3/5] coccinelle: add xxxsetbitsXX converting spatch
From
: Corentin Labbe
[PATCH 0/5] introduce setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 functions
From
: Corentin Labbe
Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Jens Axboe
RE: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Jens Axboe
RE: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Hans de Goede
[PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Hans de Goede
RE: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Hans de Goede
[PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
RE: [PATCH v2] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH v2] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Hans de Goede
[PATCH v2] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH] [RFC v2] Drop all 00-INDEX files from Documentation/
From
: Paul Moore
Re: [PATCH v5 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Maxime Ripard
Re: Problem report - failed TRUSTED RECEIVE DMA
From
: Alex
Re: Problem report - failed TRUSTED RECEIVE DMA
From
: Jens Axboe
Re: Problem report - failed TRUSTED RECEIVE DMA
From
: Alex
Re: [PATCH v5 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Jens Axboe
Re: [PATCH v5 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Hans de Goede
Re: [PATCH v5 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Maxime Ripard
[PATCH v5 3/9] dt-bindings: ata: ahci-platform: document ahci-supply
From
: Corentin Labbe
[PATCH v5 2/9] ata: ahci_platform: add support for AHCI controller regulator
From
: Corentin Labbe
[PATCH v5 1/9] dt-bindings: ata: ahci-platform: fix indentation of target-supply
From
: Corentin Labbe
[PATCH v5 4/9] ata: ahci_platform: add support for PHY controller regulator
From
: Corentin Labbe
[PATCH v5 5/9] dt-bindings: ata: ahci-platform: document phy-supply
From
: Corentin Labbe
[PATCH v5 9/9] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
From
: Corentin Labbe
[PATCH v5 8/9] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
[PATCH v5 7/9] dt-bindings: ata: update ahci_sunxi bindings
From
: Corentin Labbe
[PATCH v5 6/9] ata: ahci_sunxi: add support for r40
From
: Corentin Labbe
[PATCH v5 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Corentin Labbe
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Maxime Ripard
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Jens Axboe
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Icenowy Zheng
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Icenowy Zheng
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Chen-Yu Tsai
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Chen-Yu Tsai
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
Re: [PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
From
: Maxime Ripard
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: maxime . ripard
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Chen-Yu Tsai
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
Re: [PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
From
: Corentin Labbe
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Maxime Ripard
Re: [PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
From
: Maxime Ripard
Re: [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Maxime Ripard
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Jens Axboe
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Chen-Yu Tsai
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Jens Axboe
Re: [PATCH v4 13/13 DONOTMERGE] ata: ahci_sunxi: remove PHY code
From
: Hans de Goede
Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Hans de Goede
[PATCH v4 01/13] dt-bindings: ata: ahci-platform: fix indentation of target-supply
From
: Corentin Labbe
[PATCH v4 02/13] ata: ahci_platform: add support for AHCI controller regulator
From
: Corentin Labbe
[PATCH v4 04/13] phy: Add sun4i-a10-phy-sata driver
From
: Corentin Labbe
[PATCH v4 13/13 DONOTMERGE] ata: ahci_sunxi: remove PHY code
From
: Corentin Labbe
[PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
From
: Corentin Labbe
[PATCH v4 11/13] ARM: dts: sun7i: a20: add sata-port/sata-phy nodes
From
: Corentin Labbe
[PATCH v4 10/13] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
From
: Corentin Labbe
[PATCH v4 08/13] ata: ahci_sunxi: add support for r40
From
: Corentin Labbe
[PATCH v4 07/13] ata: ahci_sunxi: Bypass PHY init when using the new binding
From
: Corentin Labbe
[PATCH v4 06/13] dt-bindings: ata: update ahci_sunxi bindings
From
: Corentin Labbe
[PATCH v4 05/13] dt-bindings: phy: document sun4i-a10-sata-phy
From
: Corentin Labbe
[PATCH v4 03/13] dt-bindings: ata: ahci-platform: document ahci-supply
From
: Corentin Labbe
[PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
[PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
From
: Corentin Labbe
Re: [PATCH] libata: Use SMART LBAM password defines
From
: Linus Walleij
Re: [PATCH] libata: Use SMART LBAM password defines
From
: Jens Axboe
Re: [PATCH] libata: Use SMART LBAM password defines
From
: Sergei Shtylyov
[PATCH v3] libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [ANNOUNCE] Jens is the new libata maintainer
From
: Hans de Goede
Reminder: Alpine Linux Persistence and Storage Summit happens soon
From
: Richard Weinberger
Re: [PATCH v2 2/3] ata: libahci_platform: add reset control support
From
: Rob Herring
Re: [PATCH] ata: ahci: Convert to using %pOFn instead of device_node.name
From
: Jens Axboe
[PATCH] ata: ahci: Convert to using %pOFn instead of device_node.name
From
: Rob Herring
Re: [PATCH] ata: ftide010: Add a quirk for SQ201
From
: Jens Axboe
Re: [PATCH] ata: ftide010: Add a quirk for SQ201
From
: Linus Walleij
Re: [ANNOUNCE] Jens is the new libata maintainer
From
: Jens Axboe
RE: [PATCH] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [PATCH] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Hans de Goede
[PATCH] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From
: Suman Tripathi
Re: [ANNOUNCE] Jens is the new libata maintainer
From
: Hans de Goede
Re: [ANNOUNCE] Jens is the new libata maintainer
From
: Bartlomiej Zolnierkiewicz
[PATCH] Fix up libata MAINTAINERS entry
From
: Jens Axboe
Re: [ANNOUNCE] Jens is the new libata maintainer
From
: Jens Axboe
Re: [PATCH] MAINTAINERS: libata pata: fix Jens Axboe's email address
From
: Jens Axboe
Re: [ANNOUNCE] Jens is the new libata maintainer
From
: Tejun Heo
[ANNOUNCE] Jens is the new libata maintainer
From
: Tejun Heo
[PATCH] MAINTAINERS: libata pata: fix Jens Axboe's email address
From
: Baruch Siach
Re: [PATCH v2] libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
[PATCH v2] libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
[PATCH] libata: Use SMART LBAM password defines
From
: Linus Walleij
Re: [PATCH v1] libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
[PATCH v1] libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
[GIT PULL] libata changes for v4.19-rc1
From
: Tejun Heo
Re: [PATCH] libata: Add missing newline at end of file
From
: Martin K. Petersen
[PATCH] libata: Add missing newline at end of file
From
: Geert Uytterhoeven
Re: [PATCH v2 0/3] ata: ahci-platform: add reset control support except for existing drivers
From
: Tejun Heo
Re: [PATCH v2 0/3] ata: ahci-platform: add reset control support except for existing drivers
From
: Hans de Goede
[PATCH v2 3/3] ata: ahci_platform: enable to get and control reset
From
: Kunihiko Hayashi
[PATCH v2 2/3] ata: libahci_platform: add reset control support
From
: Kunihiko Hayashi
[PATCH v2 1/3] ata: add an extra argument to ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH v2 0/3] ata: ahci-platform: add reset control support except for existing drivers
From
: Kunihiko Hayashi
Re: [PATCH 01/14] ata: ahci-platform: add reset control support and the flag to specify using reset
From
: Kunihiko Hayashi
Re: [PATCH 00/14] ata: ahci-platform: add reset control support except for existing drivers
From
: Kunihiko Hayashi
Re: [PATCH 01/14] ata: ahci-platform: add reset control support and the flag to specify using reset
From
: Sergei Shtylyov
Re: [PATCH 00/14] ata: ahci-platform: add reset control support except for existing drivers
From
: Hans de Goede
[PATCH 03/14] ata: ahci_ceva: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 02/14] ata: ahci_brcm: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 08/14] ata: ahci_mvebu: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 10/14] ata: ahci_seattle: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 07/14] ata: ahci_brcm: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 12/14] ata: ahci_sunxi: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 06/14] ata: ahci_imx: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 01/14] ata: ahci-platform: add reset control support and the flag to specify using reset
From
: Kunihiko Hayashi
[PATCH 05/14] ata: ahci_dm816: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 09/14] ata: ahci_qoriq: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 13/14] ata: ahci_tegra: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 14/14] ata: ahci_xgene: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 11/14] ata: ahci_st: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 04/14] ata: ahci_da850: add second argument of ahci_platform_get_resources()
From
: Kunihiko Hayashi
[PATCH 00/14] ata: ahci-platform: add reset control support except for existing drivers
From
: Kunihiko Hayashi
[GIT] IDE
From
: David Miller
Re: [PATCH] pata_pxa.c: fix missing return value check of devm_ioremap()
From
: Tejun Heo
Re: [PATCHv2] ide: Use NULL to compare with pointer-typed value rather than 0
From
: Joe Perches
Re: [PATCHv2] ide: Use NULL to compare with pointer-typed value rather than 0
From
: Sergei Shtylyov
Re: [PATCHv2] ide: Use NULL to compare with pointer-typed value rather than 0
From
: Joe Perches
Re: [PATCHv2] ide: Use NULL to compare with pointer-typed value rather than 0
From
: Sergei Shtylyov
Re: [PATCHv2] ide: Use NULL to compare with pointer-typed value rather than 0
From
: Sergei Shtylyov
[PATCHv2] ide: Use NULL to compare with pointer-typed value rather than 0
From
: zhong jiang
Re: [PATCH] ide: Use NULL to compare with pointer-typed value rather than 0
From
: zhong jiang
[PATCH] pata_pxa.c: fix missing return value check of devm_ioremap()
From
: Jiecheng Wu
[PATCH] ide: Use NULL to compare with pointer-typed value rather than 0
From
: zhong jiang
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCH] ide: remove redundant variables queue_run_ms and left
From
: David Miller
Re: [PATCH] ide-tape: remove redundant variable buffer_size
From
: David Miller
Re: [PATCH] ide: mark expected switch fall-throughs
From
: David Miller
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Tejun Heo
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
[Regression] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
From
: Joseph Salisbury
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: [PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Guenter Roeck
[PATCH] RFC: libata: Add hwmon support for SMART temperature sensors
From
: Linus Walleij
Re: linux: sata_nv: adma support
From
: Pali Rohár
Re: [PATCH v2 4/9] target: don't depend on SCSI
From
: Christoph Hellwig
Re: [PATCH v2 4/9] target: don't depend on SCSI
From
: Randy Dunlap
Re: [PATCH v2 4/9] target: don't depend on SCSI
From
: Kees Cook
Re: [PATCH v2 4/9] target: don't depend on SCSI
From
: Randy Dunlap
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Geert Uytterhoeven
Re: [PATCH] ata: sata_rcar: Add r8a77965 support
From
: Tejun Heo
Re: [PATCH] ata: sata_rcar: Add r8a77965 support
From
: Wolfram Sang
Re: [PATCH] ata: sata_rcar: really mask all interrupts on Gen2 and later
From
: Tejun Heo
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Tejun Heo
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Wolfram Sang
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Geert Uytterhoeven
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Wolfram Sang
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Sergei Shtylyov
Re: [PATCH] ata: sata_rcar: really mask all interrupts on Gen2 and later
From
: Sergei Shtylyov
Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Geert Uytterhoeven
[PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3
From
: Wolfram Sang
[PATCH] ata: sata_rcar: really mask all interrupts on Gen2 and later
From
: Wolfram Sang
Re: [PATCH v2 0/9] block: Consolidate scsi sense buffer usage
From
: Kees Cook
Re: [PATCH v2 0/9] block: Consolidate scsi sense buffer usage
From
: Jens Axboe
Re: [PATCH v2 0/9] block: Consolidate scsi sense buffer usage
From
: Martin K. Petersen
Re: linux-next: Tree for Aug 1
From
: Bart Van Assche
Re: linux-next: Tree for Aug 1
From
: Ming Lei
Re: linux-next: Tree for Aug 1
From
: Bart Van Assche
Re: linux-next: Tree for Aug 1
From
: Ming Lei
Re: linux-next: Tree for Aug 1
From
: Guenter Roeck
Re: linux-next: Tree for Aug 1
From
: Ming Lei
[Bug 200709] QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
[Bug 200709] New: QEMU's IDE hard disk device fails to work properly with 4.18 release candidates (regression vs. 4.17 and earlier)
From
: bugzilla-daemon
Re: [PATCH v2 3/9] scsi: build scsi_common.o for all scsi passthrough request users
From
: Kees Cook
Re: [PATCH v2 8/9] libata-scsi: Move sense buffers onto stack
From
: Tejun Heo
Re: [PATCH v2 9/9] scsi: Check sense buffer size at build time
From
: Christoph Hellwig
Re: [PATCH v2 8/9] libata-scsi: Move sense buffers onto stack
From
: Christoph Hellwig
Re: [PATCH v2 7/9] cdrom: Use struct scsi_sense_hdr internally
From
: Christoph Hellwig
Re: [PATCH v2 6/9] ide-cd: Remove redundant sense buffer
From
: Christoph Hellwig
Re: [PATCH v2 5/9] block: Switch struct packet_command to use struct scsi_sense_hdr
From
: Christoph Hellwig
Re: [PATCH v2 6/9] ide-cd: Remove redundant sense buffer
From
: David Miller
Re: [PATCH v2 1/9] ide-cd: Drop unused sense buffers
From
: David Miller
Re: [PATCH v2 3/9] scsi: build scsi_common.o for all scsi passthrough request users
From
: Bart Van Assche
Re: [PATCH v2 3/9] scsi: build scsi_common.o for all scsi passthrough request users
From
: hch@xxxxxxxxxxxxx
Re: [PATCH v2 3/9] scsi: build scsi_common.o for all scsi passthrough request users
From
: Bart Van Assche
[PATCH v2 3/9] scsi: build scsi_common.o for all scsi passthrough request users
From
: Kees Cook
[PATCH v2 0/9] block: Consolidate scsi sense buffer usage
From
: Kees Cook
[PATCH v2 4/9] target: don't depend on SCSI
From
: Kees Cook
[PATCH v2 6/9] ide-cd: Remove redundant sense buffer
From
: Kees Cook
[PATCH v2 8/9] libata-scsi: Move sense buffers onto stack
From
: Kees Cook
[PATCH v2 7/9] cdrom: Use struct scsi_sense_hdr internally
From
: Kees Cook
[PATCH v2 5/9] block: Switch struct packet_command to use struct scsi_sense_hdr
From
: Kees Cook
Re: [PATCH 3/6] block: Create scsi_sense.h for SCSI and ATAPI
From
: Kees Cook
[PATCH v2 9/9] scsi: Check sense buffer size at build time
From
: Kees Cook
[PATCH v2 2/9] scsi: cxlflash: Drop unused sense buffers
From
: Kees Cook
[PATCH v2 1/9] ide-cd: Drop unused sense buffers
From
: Kees Cook
Re: [PATCH 3/6] block: Create scsi_sense.h for SCSI and ATAPI
From
: Christoph Hellwig
Re: [PATCH 0/2] ata: libahci: devslp fixes
From
: Tejun Heo
Re: [PATCH 0/2] ata: libahci: devslp fixes
From
: Hans de Goede
Re: [PATCH 0/2] ata: libahci: devslp fixes
From
: Tejun Heo
Re: [PATCH 0/2] ata: libahci: devslp fixes
From
: Srinivas Pandruvada
Re: [PATCH v2 0/2] ata: ahci: Enable DEVSLP by default on SLP_S0 support
From
: Tejun Heo
Re: [PATCH v2 0/2] ata: ahci: Enable DEVSLP by default on SLP_S0 support
From
: Hans de Goede
[PATCH v2 2/2] ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
From
: Srinivas Pandruvada
[PATCH v2 1/2] ata: ahci: Support state with min power but Partial low power state
From
: Srinivas Pandruvada
[PATCH v2 0/2] ata: ahci: Enable DEVSLP by default on SLP_S0 support
From
: Srinivas Pandruvada
Re: [PATCH 2/2] ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
From
: Hans de Goede
Re: [PATCH] ata: sata_rcar: Add r8a77965 support
From
: Simon Horman
Re: [PATCH] ata: sata_rcar: Add r8a77965 support
From
: Geert Uytterhoeven
[PATCH] ata: sata_rcar: Add r8a77965 support
From
: Wolfram Sang
Re: [PATCH 2/2] ata: sata_rcar: Add rudimentary Runtime PM support
From
: Wolfram Sang
Re: [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
From
: Wolfram Sang
Re: [PATCH] Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Tejun Heo
Re: [PATCH] Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Jon Hunter
Re: [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
From
: Tejun Heo
Re: [PATCH 3/3] ata: prevent double resume of ata platform device on init
From
: Roger Quadros
Re: [PATCH 2/2] ata: sata_rcar: Add rudimentary Runtime PM support
From
: Sergei Shtylyov
Re: [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
From
: Sergei Shtylyov
[UPDATE][PATCH 2/2] ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
From
: Srinivas Pandruvada
[PATCH 0/2] ata: sata_rcar: Add rudimentary Runtime PM support
From
: Geert Uytterhoeven
[PATCH 2/2] ata: sata_rcar: Add rudimentary Runtime PM support
From
: Geert Uytterhoeven
[PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
From
: Geert Uytterhoeven
[PATCH 0/2] ata: ahci: Enable DEVSLP by default on SLP_S0 support
From
: Srinivas Pandruvada
[PATCH 1/2] ata: ahci: Support state with min power but Partial low power state
From
: Srinivas Pandruvada
[PATCH 2/2] ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
From
: Srinivas Pandruvada
Re: [PATCH 3/3] ata: prevent double resume of ata platform device on init
From
: Samuel Morris
Re: [RFC PATCH v2 1/2] ata: ahci: Support state with min power and Partial low power state
From
: Hans de Goede
Re: [PATCH 3/3] ata: prevent double resume of ata platform device on init
From
: Hans de Goede
Re: [PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Simon Baatz
Re: [PATCH 3/3] ata: prevent double resume of ata platform device on init
From
: Samuel Morris
Re: [PATCH 2/3] ata: ahci_platform: allow disabling of hotplug to save power
From
: Samuel Morris
Re: [PATCH 1/3] ata: ahci: rpm_put port on port_stop to match rpm_get in port_start
From
: Samuel Morris
Re: [PATCH 0/3] ata: implement runtime pm for ahci_platform
From
: Samuel Morris
Re: [PATCH 0/3] ata: implement runtime pm for ahci_platform
From
: Tejun Heo
Re: [PATCH] Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Marcel Ziswiler
Re: [PATCH v3 4/9] dt-bindings: ata: ahci-platform: document AHCI reset
From
: LABBE Corentin
Re: [PATCH] Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Mikko Perttunen
[PATCH] Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Corentin Labbe
Re: [PATCH 1/2] ata: libahci: Correct setting of DEVSLP register
From
: Srinivas Pandruvada
[PATCH 3/3] ata: prevent double resume of ata platform device on init
From
: Sam Morris
[PATCH 2/3] ata: ahci_platform: allow disabling of hotplug to save power
From
: Sam Morris
[PATCH 1/3] ata: ahci: rpm_put port on port_stop to match rpm_get in port_start
From
: Sam Morris
[PATCH 0/3] ata: implement runtime pm for ahci_platform
From
: Sam Morris
Re: [PATCH] ata: ftide010: Add a quirk for SQ201
From
: Tejun Heo
Re: [PATCH v3 7/9] dt-bindings: ata: ahci-platform: document port-supply
From
: Icenowy Zheng
Re: [PATCH v3 7/9] dt-bindings: ata: ahci-platform: document port-supply
From
: Rob Herring
Re: [PATCH v3 5/9] dt-bindings: ata: ahci-platform: fix indentation of target-supply
From
: Rob Herring
Re: [PATCH v3 4/9] dt-bindings: ata: ahci-platform: document AHCI reset
From
: Rob Herring
Re: [PATCH v3 2/9] dt-bindings: ata: ahci-platform: document ahci-supply
From
: Rob Herring
Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: LABBE Corentin
Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Mikko Perttunen
Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: LABBE Corentin
Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
From
: Mikko Perttunen
[PATCH] ata: ftide010: Add a quirk for SQ201
From
: Linus Walleij
Re: [RFC PATCH v2 1/2] ata: ahci: Support state with min power and Partial low power state
From
: Srinivas Pandruvada
Re: [PATCH v3 4/9] dt-bindings: ata: ahci-platform: document AHCI reset
From
: Maxime Ripard
Re: [PATCH v3 6/9] ata: ahci_platform: add support for port regulator
From
: Icenowy Zheng
[PATCH v3 4/9] dt-bindings: ata: ahci-platform: document AHCI reset
From
: Corentin Labbe
[PATCH v3 5/9] dt-bindings: ata: ahci-platform: fix indentation of target-supply
From
: Corentin Labbe
[PATCH v3 6/9] ata: ahci_platform: add support for port regulator
From
: Corentin Labbe
[PATCH v3 7/9] dt-bindings: ata: ahci-platform: document port-supply
From
: Corentin Labbe
[PATCH v3 3/9] ata: ahci_platform: add support for AHCI controller reset
From
: Corentin Labbe
[PATCH v3 2/9] dt-bindings: ata: ahci-platform: document ahci-supply
From
: Corentin Labbe
[PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI
From
: Corentin Labbe
[PATCH v3 9/9] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
From
: Corentin Labbe
[PATCH v3 8/9] ARM: dts: sun8i: r40: add sata node
From
: Corentin Labbe
[PATCH v3 1/9] ata: ahci_platform: add support for AHCI controller regulator
From
: Corentin Labbe
Re: [RFC PATCH v2 2/2] ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
From
: Hans de Goede
Re: [RFC PATCH v2 1/2] ata: ahci: Support state with min power and Partial low power state
From
: Hans de Goede
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]