Re: [PATCH] libata: don't request sense data on !ZAC ATA devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/24/19 10:32 AM, Tejun Heo wrote:
> ZAC support added sense data requesting on error for both ZAC and ATA
> devices. This seems to cause erratic error handling behaviors on some
> SSDs where the device reports sense data availability and then
> delivers the wrong content making EH take the wrong actions.  The
> failure mode was sporadic on a LITE-ON ssd and couldn't be reliably
> reproduced.
> 
> There is no value in requesting sense data from non-ZAC ATA devices
> while there's a significant risk of introducing EH misbehaviors which
> are difficult to reproduce and fix.  Let's do the sense data dancing
> only for ZAC devices.

Applied, thanks Tejun.

-- 
Jens Axboe




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux