On 2019/06/25 1:33, Tejun Heo wrote:
> ZAC support added sense data requesting on error for both ZAC and ATA
> devices. This seems to cause erratic error handling behaviors on some
> SSDs where the device reports sense data availability and then
> delivers the wrong content making EH take the wrong actions. The
> failure mode was sporadic on a LITE-ON ssd and couldn't be reliably
> reproduced.
>
> There is no value in requesting sense data from non-ZAC ATA devices
> while there's a significant risk of introducing EH misbehaviors which
> are difficult to reproduce and fix. Let's do the sense data dancing
> only for ZAC devices.
>
> Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
> Cc: Hannes Reinecke <hare@xxxxxxxxxx>
> ---
> drivers/ata/libata-eh.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
> index 9d687e1d4325..3bfd9da58473 100644
> --- a/drivers/ata/libata-eh.c
> +++ b/drivers/ata/libata-eh.c
> @@ -1469,7 +1469,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
> tf->hob_lbah = buf[10];
> tf->nsect = buf[12];
> tf->hob_nsect = buf[13];
> - if (ata_id_has_ncq_autosense(dev->id))
> + if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
> tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
>
> return 0;
> @@ -1716,7 +1716,8 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
> memcpy(&qc->result_tf, &tf, sizeof(tf));
> qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
> qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
> - if ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary) {
> + if (dev->class == ATA_DEV_ZAC &&
> + ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
> char sense_key, asc, ascq;
>
> sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
> @@ -1770,10 +1771,11 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
> }
>
> switch (qc->dev->class) {
> - case ATA_DEV_ATA:
> case ATA_DEV_ZAC:
> if (stat & ATA_SENSE)
> ata_eh_request_sense(qc, qc->scsicmd);
> + /* fall through */
> + case ATA_DEV_ATA:
> if (err & ATA_ICRC)
> qc->err_mask |= AC_ERR_ATA_BUS;
> if (err & (ATA_UNC | ATA_AMNF))
>
No problems with tests.
Tested-by: Masato Suzuki <masato.suzuki@xxxxxxx>
Reviewed-by: Damien Le Moal <damien.lemoal@xxxxxxx>
--
Damien Le Moal
Western Digital Research
