This converts the i.MX AHCI driver to use a GPIO descriptor instead of parsing the device tree by itself. This driver is quite obviously device tree only, and the GPIO line is treated as optional, so let's keep it as optional. None of the device trees in the kernel use this GPIO facility today, so it is hard to test. Cc: Egor Starkov <egor.starkov@xxxxxx> Cc: Richard Zhu <hongxing.zhu@xxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v3->v4: - Rebase on v5.2-rc1 and resend. - If this keeps being missed I guess I'll just apply it to the GPIO tree. ChangeLog v2->v3: - Rebase on v5.1-rc1 and resend. ChangeLog v1->v2: - Drop the "clkreq had been initialized" message - The message indicated several users on the same GPIO line, so set the GPIO as GPIOD_FLAGS_BIT_NONEXCLUSIVE so we can have more than one consumer of the same GPIO line --- drivers/ata/ahci_imx.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index b00799d208f5..2fa704e56bed 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -22,8 +22,8 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/ahci_platform.h> +#include <linux/gpio/consumer.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/libata.h> @@ -111,7 +111,7 @@ struct imx_ahci_priv { struct clk *phy_pclk0; struct clk *phy_pclk1; void __iomem *phy_base; - int clkreq_gpio; + struct gpio_desc *clkreq_gpiod; struct regmap *gpr; bool no_device; bool first_time; @@ -991,7 +991,6 @@ static struct scsi_host_template ahci_platform_sht = { static int imx8_sata_probe(struct device *dev, struct imx_ahci_priv *imxpriv) { - int ret; struct resource *phy_res; struct platform_device *pdev = imxpriv->ahci_pdev; struct device_node *np = dev->of_node; @@ -1044,20 +1043,12 @@ static int imx8_sata_probe(struct device *dev, struct imx_ahci_priv *imxpriv) } /* Fetch GPIO, then enable the external OSC */ - imxpriv->clkreq_gpio = of_get_named_gpio(np, "clkreq-gpio", 0); - if (gpio_is_valid(imxpriv->clkreq_gpio)) { - ret = devm_gpio_request_one(dev, imxpriv->clkreq_gpio, - GPIOF_OUT_INIT_LOW, - "SATA CLKREQ"); - if (ret == -EBUSY) { - dev_info(dev, "clkreq had been initialized.\n"); - } else if (ret) { - dev_err(dev, "%d unable to get clkreq.\n", ret); - return ret; - } - } else if (imxpriv->clkreq_gpio == -EPROBE_DEFER) { - return imxpriv->clkreq_gpio; - } + imxpriv->clkreq_gpiod = devm_gpiod_get_optional(dev, "clkreq", + GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); + if (IS_ERR(imxpriv->clkreq_gpiod)) + return PTR_ERR(imxpriv->clkreq_gpiod); + if (imxpriv->clkreq_gpiod) + gpiod_set_consumer_name(imxpriv->clkreq_gpiod, "SATA CLKREQ"); return 0; } -- 2.20.1