[PATCH 05/28] PCI/hotplug: remove the sgi_hotplug driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SGI SN2 support is about to be removed.  Remove this driver that
depends on the SN2 support.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
 drivers/pci/hotplug/Kconfig       |   9 -
 drivers/pci/hotplug/Makefile      |   1 -
 drivers/pci/hotplug/sgi_hotplug.c | 700 ------------------------------
 3 files changed, 710 deletions(-)
 delete mode 100644 drivers/pci/hotplug/sgi_hotplug.c

diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index e9f78eb390d2..e7b493c22bf3 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -147,15 +147,6 @@ config HOTPLUG_PCI_RPA_DLPAR
 
 	  When in doubt, say N.
 
-config HOTPLUG_PCI_SGI
-	tristate "SGI PCI Hotplug Support"
-	depends on IA64_SGI_SN2 || IA64_GENERIC
-	help
-	  Say Y here if you want to use the SGI Altix Hotplug
-	  Driver for PCI devices.
-
-	  When in doubt, say N.
-
 config HOTPLUG_PCI_S390
 	bool "System z PCI Hotplug Support"
 	depends on S390 && 64BIT
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 7e3331603714..5196983220df 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_HOTPLUG_PCI_SHPC)		+= shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_POWERNV)	+= pnv-php.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)		+= rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)	+= rpadlpar_io.o
-obj-$(CONFIG_HOTPLUG_PCI_SGI)		+= sgi_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI)		+= acpiphp.o
 obj-$(CONFIG_HOTPLUG_PCI_S390)		+= s390_pci_hpc.o
 
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
deleted file mode 100644
index 231f5bdd3d2d..000000000000
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ /dev/null
@@ -1,700 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2005-2006 Silicon Graphics, Inc. All rights reserved.
- *
- * This work was based on the 2.4/2.6 kernel development by Dick Reigner.
- * Work to add BIOS PROM support was completed by Mike Habeck.
- */
-
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/pci_hotplug.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mutex.h>
-
-#include <asm/sn/addrs.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/l1.h>
-#include <asm/sn/module.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/sn_feature_sets.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/types.h>
-#include <asm/sn/acpi.h>
-
-#include "../pci.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("SGI (prarit@xxxxxxx, dickie@xxxxxxx, habeck@xxxxxxx)");
-MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver");
-
-
-/* SAL call error codes. Keep in sync with prom header io/include/pcibr.h */
-#define PCI_SLOT_ALREADY_UP		2	/* slot already up */
-#define PCI_SLOT_ALREADY_DOWN		3	/* slot already down */
-#define PCI_L1_ERR			7	/* L1 console command error */
-#define PCI_EMPTY_33MHZ			15	/* empty 33 MHz bus */
-
-
-#define PCIIO_ASIC_TYPE_TIOCA		4
-#define PCI_L1_QSIZE			128	/* our L1 message buffer size */
-#define SN_MAX_HP_SLOTS			32	/* max hotplug slots */
-#define SN_SLOT_NAME_SIZE		33	/* size of name string */
-
-/* internal list head */
-static struct list_head sn_hp_list;
-
-/* hotplug_slot struct's private pointer */
-struct slot {
-	int device_num;
-	struct pci_bus *pci_bus;
-	/* this struct for glue internal only */
-	struct hotplug_slot hotplug_slot;
-	struct list_head hp_list;
-	char physical_path[SN_SLOT_NAME_SIZE];
-};
-
-struct pcibr_slot_enable_resp {
-	int resp_sub_errno;
-	char resp_l1_msg[PCI_L1_QSIZE + 1];
-};
-
-struct pcibr_slot_disable_resp {
-	int resp_sub_errno;
-	char resp_l1_msg[PCI_L1_QSIZE + 1];
-};
-
-enum sn_pci_req_e {
-	PCI_REQ_SLOT_ELIGIBLE,
-	PCI_REQ_SLOT_DISABLE
-};
-
-static int enable_slot(struct hotplug_slot *slot);
-static int disable_slot(struct hotplug_slot *slot);
-static inline int get_power_status(struct hotplug_slot *slot, u8 *value);
-
-static const struct hotplug_slot_ops sn_hotplug_slot_ops = {
-	.enable_slot            = enable_slot,
-	.disable_slot           = disable_slot,
-	.get_power_status       = get_power_status,
-};
-
-static DEFINE_MUTEX(sn_hotplug_mutex);
-
-static struct slot *to_slot(struct hotplug_slot *bss_hotplug_slot)
-{
-	return container_of(bss_hotplug_slot, struct slot, hotplug_slot);
-}
-
-static ssize_t path_show(struct pci_slot *pci_slot, char *buf)
-{
-	int retval = -ENOENT;
-	struct slot *slot = to_slot(pci_slot->hotplug);
-
-	if (!slot)
-		return retval;
-
-	retval = sprintf(buf, "%s\n", slot->physical_path);
-	return retval;
-}
-
-static struct pci_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
-
-static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
-{
-	struct pcibus_info *pcibus_info;
-	u16 busnum, segment, ioboard_type;
-
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
-
-	/* Check to see if this is a valid slot on 'pci_bus' */
-	if (!(pcibus_info->pbi_valid_devices & (1 << device)))
-		return -EPERM;
-
-	ioboard_type = sn_ioboard_to_pci_bus(pci_bus);
-	busnum = pcibus_info->pbi_buscommon.bs_persist_busnum;
-	segment = pci_domain_nr(pci_bus) & 0xf;
-
-	/* Do not allow hotplug operations on base I/O cards */
-	if ((ioboard_type == L1_BRICKTYPE_IX ||
-	     ioboard_type == L1_BRICKTYPE_IA) &&
-	    (segment == 1 && busnum == 0 && device != 1))
-		return -EPERM;
-
-	return 1;
-}
-
-static int sn_pci_bus_valid(struct pci_bus *pci_bus)
-{
-	struct pcibus_info *pcibus_info;
-	u32 asic_type;
-	u16 ioboard_type;
-
-	/* Don't register slots hanging off the TIOCA bus */
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
-	asic_type = pcibus_info->pbi_buscommon.bs_asic_type;
-	if (asic_type == PCIIO_ASIC_TYPE_TIOCA)
-		return -EPERM;
-
-	/* Only register slots in I/O Bricks that support hotplug */
-	ioboard_type = sn_ioboard_to_pci_bus(pci_bus);
-	switch (ioboard_type) {
-		case L1_BRICKTYPE_IX:
-		case L1_BRICKTYPE_PX:
-		case L1_BRICKTYPE_IA:
-		case L1_BRICKTYPE_PA:
-		case L1_BOARDTYPE_PCIX3SLOT:
-			return 1;
-			break;
-		default:
-			return -EPERM;
-			break;
-	}
-
-	return -EIO;
-}
-
-static int sn_hp_slot_private_alloc(struct hotplug_slot **bss_hotplug_slot,
-				    struct pci_bus *pci_bus, int device,
-				    char *name)
-{
-	struct pcibus_info *pcibus_info;
-	struct slot *slot;
-
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
-
-	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
-	if (!slot)
-		return -ENOMEM;
-
-	slot->device_num = device;
-	slot->pci_bus = pci_bus;
-	sprintf(name, "%04x:%02x:%02x",
-		pci_domain_nr(pci_bus),
-		((u16)pcibus_info->pbi_buscommon.bs_persist_busnum),
-		device + 1);
-
-	sn_generate_path(pci_bus, slot->physical_path);
-
-	list_add(&slot->hp_list, &sn_hp_list);
-	*bss_hotplug_slot = &slot->hotplug_slot;
-
-	return 0;
-}
-
-static struct hotplug_slot *sn_hp_destroy(void)
-{
-	struct slot *slot;
-	struct pci_slot *pci_slot;
-	struct hotplug_slot *bss_hotplug_slot = NULL;
-
-	list_for_each_entry(slot, &sn_hp_list, hp_list) {
-		bss_hotplug_slot = &slot->hotplug_slot;
-		pci_slot = bss_hotplug_slot->pci_slot;
-		list_del(&slot->hp_list);
-		sysfs_remove_file(&pci_slot->kobj,
-				  &sn_slot_path_attr.attr);
-		break;
-	}
-	return bss_hotplug_slot;
-}
-
-static void sn_bus_free_data(struct pci_dev *dev)
-{
-	struct pci_bus *subordinate_bus;
-	struct pci_dev *child;
-
-	/* Recursively clean up sn_irq_info structs */
-	if (dev->subordinate) {
-		subordinate_bus = dev->subordinate;
-		list_for_each_entry(child, &subordinate_bus->devices, bus_list)
-			sn_bus_free_data(child);
-	}
-	/*
-	 * Some drivers may use dma accesses during the
-	 * driver remove function. We release the sysdata
-	 * areas after the driver remove functions have
-	 * been called.
-	 */
-	sn_bus_store_sysdata(dev);
-	sn_pci_unfixup_slot(dev);
-}
-
-static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
-			  int device_num, char **ssdt)
-{
-	struct slot *slot = to_slot(bss_hotplug_slot);
-	struct pcibus_info *pcibus_info;
-	struct pcibr_slot_enable_resp resp;
-	int rc;
-
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-
-	/*
-	 * Power-on and initialize the slot in the SN
-	 * PCI infrastructure.
-	 */
-	rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp, ssdt);
-
-
-	if (rc == PCI_SLOT_ALREADY_UP) {
-		pci_dbg(slot->pci_bus->self, "is already active\n");
-		return 1; /* return 1 to user */
-	}
-
-	if (rc == PCI_L1_ERR) {
-		pci_dbg(slot->pci_bus->self, "L1 failure %d with message: %s",
-			resp.resp_sub_errno, resp.resp_l1_msg);
-		return -EPERM;
-	}
-
-	if (rc) {
-		pci_dbg(slot->pci_bus->self, "insert failed with error %d sub-error %d\n",
-			rc, resp.resp_sub_errno);
-		return -EIO;
-	}
-
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-	pcibus_info->pbi_enabled_devices |= (1 << device_num);
-
-	return 0;
-}
-
-static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
-			   int device_num, int action)
-{
-	struct slot *slot = to_slot(bss_hotplug_slot);
-	struct pcibus_info *pcibus_info;
-	struct pcibr_slot_disable_resp resp;
-	int rc;
-
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-
-	rc = sal_pcibr_slot_disable(pcibus_info, device_num, action, &resp);
-
-	if ((action == PCI_REQ_SLOT_ELIGIBLE) &&
-	    (rc == PCI_SLOT_ALREADY_DOWN)) {
-		pci_dbg(slot->pci_bus->self, "Slot %s already inactive\n", slot->physical_path);
-		return 1; /* return 1 to user */
-	}
-
-	if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
-		pci_dbg(slot->pci_bus->self, "Cannot remove last 33MHz card\n");
-		return -EPERM;
-	}
-
-	if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
-		pci_dbg(slot->pci_bus->self, "L1 failure %d with message \n%s\n",
-			resp.resp_sub_errno, resp.resp_l1_msg);
-		return -EPERM;
-	}
-
-	if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
-		pci_dbg(slot->pci_bus->self, "remove failed with error %d sub-error %d\n",
-			rc, resp.resp_sub_errno);
-		return -EIO;
-	}
-
-	if ((action == PCI_REQ_SLOT_ELIGIBLE) && !rc)
-		return 0;
-
-	if ((action == PCI_REQ_SLOT_DISABLE) && !rc) {
-		pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-		pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
-		pci_dbg(slot->pci_bus->self, "remove successful\n");
-		return 0;
-	}
-
-	if ((action == PCI_REQ_SLOT_DISABLE) && rc) {
-		pci_dbg(slot->pci_bus->self, "remove failed rc = %d\n", rc);
-	}
-
-	return rc;
-}
-
-/*
- * Power up and configure the slot via a SAL call to PROM.
- * Scan slot (and any children), do any platform specific fixup,
- * and find device driver.
- */
-static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
-{
-	struct slot *slot = to_slot(bss_hotplug_slot);
-	struct pci_bus *new_bus = NULL;
-	struct pci_dev *dev;
-	int num_funcs;
-	int new_ppb = 0;
-	int rc;
-	char *ssdt = NULL;
-	void pcibios_fixup_device_resources(struct pci_dev *);
-
-	/* Serialize the Linux PCI infrastructure */
-	mutex_lock(&sn_hotplug_mutex);
-
-	/*
-	 * Power-on and initialize the slot in the SN
-	 * PCI infrastructure. Also, retrieve the ACPI SSDT
-	 * table for the slot (if ACPI capable PROM).
-	 */
-	rc = sn_slot_enable(bss_hotplug_slot, slot->device_num, &ssdt);
-	if (rc) {
-		mutex_unlock(&sn_hotplug_mutex);
-		return rc;
-	}
-
-	if (ssdt)
-		ssdt = __va(ssdt);
-	/* Add the new SSDT for the slot to the ACPI namespace */
-	if (SN_ACPI_BASE_SUPPORT() && ssdt) {
-		acpi_status ret;
-
-		ret = acpi_load_table((struct acpi_table_header *)ssdt);
-		if (ACPI_FAILURE(ret)) {
-			printk(KERN_ERR "%s: acpi_load_table failed (0x%x)\n",
-			       __func__, ret);
-			/* try to continue on */
-		}
-	}
-
-	num_funcs = pci_scan_slot(slot->pci_bus,
-				  PCI_DEVFN(slot->device_num + 1, 0));
-	if (!num_funcs) {
-		pci_dbg(slot->pci_bus->self, "no device in slot\n");
-		mutex_unlock(&sn_hotplug_mutex);
-		return -ENODEV;
-	}
-
-	/*
-	 * Map SN resources for all functions on the card
-	 * to the Linux PCI interface and tell the drivers
-	 * about them.
-	 */
-	list_for_each_entry(dev, &slot->pci_bus->devices, bus_list) {
-		if (PCI_SLOT(dev->devfn) != slot->device_num + 1)
-			continue;
-
-		/* Need to do slot fixup on PPB before fixup of children
-		 * (PPB's pcidev_info needs to be in pcidev_info list
-		 * before child's SN_PCIDEV_INFO() call to setup
-		 * pdi_host_pcidev_info).
-		 */
-		pcibios_fixup_device_resources(dev);
-		if (SN_ACPI_BASE_SUPPORT())
-			sn_acpi_slot_fixup(dev);
-		else
-			sn_io_slot_fixup(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			pci_hp_add_bridge(dev);
-			if (dev->subordinate) {
-				new_bus = dev->subordinate;
-				new_ppb = 1;
-			}
-		}
-	}
-
-	/*
-	 * Add the slot's devices to the ACPI infrastructure */
-	if (SN_ACPI_BASE_SUPPORT() && ssdt) {
-		unsigned long long adr;
-		struct acpi_device *pdevice;
-		acpi_handle phandle;
-		acpi_handle chandle = NULL;
-		acpi_handle rethandle;
-		acpi_status ret;
-
-		phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
-
-		if (acpi_bus_get_device(phandle, &pdevice)) {
-			pci_dbg(slot->pci_bus->self, "no parent device, assuming NULL\n");
-			pdevice = NULL;
-		}
-
-		acpi_scan_lock_acquire();
-		/*
-		 * Walk the rootbus node's immediate children looking for
-		 * the slot's device node(s). There can be more than
-		 * one for multifunction devices.
-		 */
-		for (;;) {
-			rethandle = NULL;
-			ret = acpi_get_next_object(ACPI_TYPE_DEVICE,
-						   phandle, chandle,
-						   &rethandle);
-
-			if (ret == AE_NOT_FOUND || rethandle == NULL)
-				break;
-
-			chandle = rethandle;
-
-			ret = acpi_evaluate_integer(chandle, METHOD_NAME__ADR,
-						    NULL, &adr);
-
-			if (ACPI_SUCCESS(ret) &&
-			    (adr>>16) == (slot->device_num + 1)) {
-
-				ret = acpi_bus_scan(chandle);
-				if (ACPI_FAILURE(ret)) {
-					printk(KERN_ERR "%s: acpi_bus_scan failed (0x%x) for slot %d func %d\n",
-					       __func__, ret, (int)(adr>>16),
-					       (int)(adr&0xffff));
-					/* try to continue on */
-				}
-			}
-		}
-		acpi_scan_lock_release();
-	}
-
-	pci_lock_rescan_remove();
-
-	/* Call the driver for the new device */
-	pci_bus_add_devices(slot->pci_bus);
-	/* Call the drivers for the new devices subordinate to PPB */
-	if (new_ppb)
-		pci_bus_add_devices(new_bus);
-
-	pci_unlock_rescan_remove();
-	mutex_unlock(&sn_hotplug_mutex);
-
-	if (rc == 0)
-		pci_dbg(slot->pci_bus->self, "insert operation successful\n");
-	else
-		pci_dbg(slot->pci_bus->self, "insert operation failed rc = %d\n", rc);
-
-	return rc;
-}
-
-static int disable_slot(struct hotplug_slot *bss_hotplug_slot)
-{
-	struct slot *slot = to_slot(bss_hotplug_slot);
-	struct pci_dev *dev, *temp;
-	int rc;
-	acpi_handle ssdt_hdl = NULL;
-
-	/* Acquire update access to the bus */
-	mutex_lock(&sn_hotplug_mutex);
-
-	/* is it okay to bring this slot down? */
-	rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
-			     PCI_REQ_SLOT_ELIGIBLE);
-	if (rc)
-		goto leaving;
-
-	/* free the ACPI resources for the slot */
-	if (SN_ACPI_BASE_SUPPORT() &&
-		PCI_CONTROLLER(slot->pci_bus)->companion) {
-		unsigned long long adr;
-		struct acpi_device *device;
-		acpi_handle phandle;
-		acpi_handle chandle = NULL;
-		acpi_handle rethandle;
-		acpi_status ret;
-
-		/* Get the rootbus node pointer */
-		phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
-
-		acpi_scan_lock_acquire();
-		/*
-		 * Walk the rootbus node's immediate children looking for
-		 * the slot's device node(s). There can be more than
-		 * one for multifunction devices.
-		 */
-		for (;;) {
-			rethandle = NULL;
-			ret = acpi_get_next_object(ACPI_TYPE_DEVICE,
-						   phandle, chandle,
-						   &rethandle);
-
-			if (ret == AE_NOT_FOUND || rethandle == NULL)
-				break;
-
-			chandle = rethandle;
-
-			ret = acpi_evaluate_integer(chandle,
-						    METHOD_NAME__ADR,
-						    NULL, &adr);
-			if (ACPI_SUCCESS(ret) &&
-			    (adr>>16) == (slot->device_num + 1)) {
-				/* retain the owner id */
-				ssdt_hdl = chandle;
-
-				ret = acpi_bus_get_device(chandle,
-							  &device);
-				if (ACPI_SUCCESS(ret))
-					acpi_bus_trim(device);
-			}
-		}
-		acpi_scan_lock_release();
-	}
-
-	pci_lock_rescan_remove();
-	/* Free the SN resources assigned to the Linux device.*/
-	list_for_each_entry_safe(dev, temp, &slot->pci_bus->devices, bus_list) {
-		if (PCI_SLOT(dev->devfn) != slot->device_num + 1)
-			continue;
-
-		pci_dev_get(dev);
-		sn_bus_free_data(dev);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-	pci_unlock_rescan_remove();
-
-	/* Remove the SSDT for the slot from the ACPI namespace */
-	if (SN_ACPI_BASE_SUPPORT() && ssdt_hdl) {
-		acpi_status ret;
-		ret = acpi_unload_parent_table(ssdt_hdl);
-		if (ACPI_FAILURE(ret)) {
-			acpi_handle_err(ssdt_hdl,
-					"%s: acpi_unload_parent_table failed (0x%x)\n",
-					__func__, ret);
-			/* try to continue on */
-		}
-	}
-
-	/* free the collected sysdata pointers */
-	sn_bus_free_sysdata();
-
-	/* Deactivate slot */
-	rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
-			     PCI_REQ_SLOT_DISABLE);
- leaving:
-	/* Release the bus lock */
-	mutex_unlock(&sn_hotplug_mutex);
-
-	return rc;
-}
-
-static inline int get_power_status(struct hotplug_slot *bss_hotplug_slot,
-				   u8 *value)
-{
-	struct slot *slot = to_slot(bss_hotplug_slot);
-	struct pcibus_info *pcibus_info;
-	u32 power;
-
-	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-	mutex_lock(&sn_hotplug_mutex);
-	power = pcibus_info->pbi_enabled_devices & (1 << slot->device_num);
-	*value = power ? 1 : 0;
-	mutex_unlock(&sn_hotplug_mutex);
-	return 0;
-}
-
-static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot)
-{
-	kfree(to_slot(bss_hotplug_slot));
-}
-
-static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
-{
-	int device;
-	struct pci_slot *pci_slot;
-	struct hotplug_slot *bss_hotplug_slot;
-	char name[SN_SLOT_NAME_SIZE];
-	int rc = 0;
-
-	/*
-	 * Currently only four devices are supported,
-	 * in the future there maybe more -- up to 32.
-	 */
-
-	for (device = 0; device < SN_MAX_HP_SLOTS ; device++) {
-		if (sn_pci_slot_valid(pci_bus, device) != 1)
-			continue;
-
-		if (sn_hp_slot_private_alloc(&bss_hotplug_slot,
-					     pci_bus, device, name)) {
-			rc = -ENOMEM;
-			goto alloc_err;
-		}
-		bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
-
-		rc = pci_hp_register(bss_hotplug_slot, pci_bus, device, name);
-		if (rc)
-			goto register_err;
-
-		pci_slot = bss_hotplug_slot->pci_slot;
-		rc = sysfs_create_file(&pci_slot->kobj,
-				       &sn_slot_path_attr.attr);
-		if (rc)
-			goto alloc_err;
-	}
-	pci_dbg(pci_bus->self, "Registered bus with hotplug\n");
-	return rc;
-
-register_err:
-	pci_dbg(pci_bus->self, "bus failed to register with err = %d\n",
-		rc);
-
-	/* destroy THIS element */
-	sn_hp_destroy();
-	sn_release_slot(bss_hotplug_slot);
-
-alloc_err:
-	/* destroy anything else on the list */
-	while ((bss_hotplug_slot = sn_hp_destroy())) {
-		pci_hp_deregister(bss_hotplug_slot);
-		sn_release_slot(bss_hotplug_slot);
-	}
-
-	return rc;
-}
-
-static int __init sn_pci_hotplug_init(void)
-{
-	struct pci_bus *pci_bus = NULL;
-	int rc;
-	int registered = 0;
-
-	if (!sn_prom_feature_available(PRF_HOTPLUG_SUPPORT)) {
-		printk(KERN_ERR "%s: PROM version does not support hotplug.\n",
-		       __func__);
-		return -EPERM;
-	}
-
-	INIT_LIST_HEAD(&sn_hp_list);
-
-	while ((pci_bus = pci_find_next_bus(pci_bus))) {
-		if (!pci_bus->sysdata)
-			continue;
-
-		rc = sn_pci_bus_valid(pci_bus);
-		if (rc != 1) {
-			pci_dbg(pci_bus->self, "not a valid hotplug bus\n");
-			continue;
-		}
-		pci_dbg(pci_bus->self, "valid hotplug bus\n");
-
-		rc = sn_hotplug_slot_register(pci_bus);
-		if (!rc) {
-			registered = 1;
-		} else {
-			registered = 0;
-			break;
-		}
-	}
-
-	return registered == 1 ? 0 : -ENODEV;
-}
-
-static void __exit sn_pci_hotplug_exit(void)
-{
-	struct hotplug_slot *bss_hotplug_slot;
-
-	while ((bss_hotplug_slot = sn_hp_destroy())) {
-		pci_hp_deregister(bss_hotplug_slot);
-		sn_release_slot(bss_hotplug_slot);
-	}
-
-	if (!list_empty(&sn_hp_list))
-		printk(KERN_ERR "%s: internal list is not empty\n", __FILE__);
-}
-
-module_init(sn_pci_hotplug_init);
-module_exit(sn_pci_hotplug_exit);
-- 
2.20.1





[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux