Libvirt Users

• Thread Index

• How to start the container's network interface automatically
  • From: WANG Cheng D
• How to start the linux container's network interface automatically
  • From: WANG Cheng D
• ANNOUNCE: Oz 0.12.0 release
  • From: Chris Lalancette
• Re: [libvirt] [RFC] Implementing ftrace support for libvirt
  • From: Mauricio Tavares
• Re: Connect libvirt to iSCSI target
  • From: Marco
• Fake Network Interface
  • From: Andrew Martin
• --persistent/--config confusion
  • From: Dennis Jacobfeuerborn
• Re: how to use openConsole and openGraphics
  • From: Eric Blake
• Re: how to use openConsole and openGraphics
  • From: yue
• Re: how to use openConsole and openGraphics
  • From: Eric Blake
• Re: [libvirt] fail to live migration is related to virtio-console
  • From: Eric Blake
• Re: Connect libvirt to iSCSI target
  • From: John Ferlan
• fail to live migration is related to virtio-console
  • From: yue
• methods in domain
  • From: Rathidevi
• how to use openConsole and openGraphics
  • From: yue
• Live migration without block copy
  • From: Paul Mathews
• Re: Reg: Methods in DomainJobInfo
  • From: Rathidevi
• Re: Reg: Methods in DomainJobInfo
  • From: Eric Blake
• man page
  • From: Fl@sh
• Re: Connect libvirt to iSCSI target
  • From: Marco
• Re: Connect libvirt to iSCSI target
  • From: John Ferlan
• Reg: Methods in DomainJobInfo
  • From: Rathidevi
• Virsh console stops accepting inputs
  • From: Satvinder Gunsi
• Re: How to attach USB disk to specified USB controller in domian?
  • From: Jianwei Hu
• Re: assign static external IP to container
  • From: scar
• Re: Connect libvirt to iSCSI target
  • From: Marco
• Re: Connect libvirt to iSCSI target
  • From: John Ferlan
• Re: Connect libvirt to iSCSI target
  • From: Marco
• Re: blockcopy for libvirt and version compatibility
  • From: Mark Trinh
• Re: blockcopy for libvirt and version compatibility
  • From: Eric Blake
• blockcopy for libvirt and version compatibility
  • From: Mark Trinh
• Re: assign static external IP to container
  • From: Gao feng
• Re: assign static external IP to container
  • From: Laine Stump
• Segfault in libxl_osevent_occurred_timeout [Was: Re: About debugging of libvirt.]
  • From: Dario Faggioli
• Re: About debugging of libvirt.
  • From: cool dharma06
• Re: About debugging of libvirt.
  • From: Daniel P. Berrange
• Re: About debugging of libvirt.
  • From: cool dharma06
• Re: About debugging of libvirt.
  • From: Dario Faggioli
• Re: fuse in libivrt-lxc
  • From: Eldar Yusupov
• Re: About debugging of libvirt.
  • From: cool dharma06
• Re: fuse in libivrt-lxc
  • From: Gao feng
• fuse in libivrt-lxc
  • From: Eldar Yusupov
• Re: About debugging of libvirt.
  • From: Michal Privoznik
• Re: About debugging of libvirt.
  • From: Dario Faggioli
• About debugging of libvirt.
  • From: cool dharma06
• QXL and VRAM settings in Virsh/Virt-Manager
  • From: Alex GS
• Re: How to attach USB disk to specified USB controller in domian?
  • From: Jianwei Hu
• Connect libvirt to iSCSI target
  • From: Marco
• BZ1042505: Upon assigning addresses to new virtio-serial ports, libvirt can over-allocate
  • From: Jonathan Lebon
• Re: How to Position a Network Interface in Physical PCI Slot
  • From: Thiru Murugan
• Re: How to attach USB disk to specified USB controller in domian?
  • From: Eric Blake
• Re: How to Position a Network Interface in Physical PCI Slot
  • From: Laine Stump
• How to attach USB disk to specified USB controller in domian?
  • From: Jianwei Hu
• How to Position a Network Interface in Physical PCI Slot
  • From: Thiru Murugan
• Re: assign static external IP to container
  • From: scar
• Re: non trivial question
  • From: Eric Blake
• non trivial question
  • From: Vasiliy Tolstov
• Re: is qemu-kvm really searched for in /usr/bin for KVM?
  • From: Robert P. J. Day
• Re: First & long question
  • From: Joaquim Barrera
• Re: is qemu-kvm really searched for in /usr/bin for KVM?
  • From: Eric Blake
• Re: First & long question
  • From: Eric Blake
• Re: First & long question
  • From: Joaquim Barrera
• Re: First & long question
  • From: Joaquim Barrera
• Re: First & long question
  • From: Ján Tomko
• First & long question
  • From: Joaquim Barrera
• Re: assign static external IP to container
  • From: Gao feng
• ANNOUNCE: ruby-libvirt 0.5.1
  • From: Chris Lalancette
• centos6 "system checkpoint"
  • From: Ask Stack
• Re: is qemu-kvm really searched for in /usr/bin for KVM?
  • From: Kashyap Chamarthy
• is qemu-kvm really searched for in /usr/bin for KVM?
  • From: Robert P. J. Day
• Re: assign static external IP to container
  • From: scar
• Re: assign static external IP to container
  • From: Gao feng
• Re: assign static external IP to container
  • From: Gao feng
• Re: assign static external IP to container
  • From: scar
• Re: virsh attach makes qcow2 format disk to raw format
  • From: 李跃洲
• Re: virsh attach makes qcow2 format disk to raw format
  • From: Eric Blake
• SAS HBA address and SCSI passthrough
  • From: Corinna Vinschen
• Re: internal error: unexcepted domain type lxc, excepted one of these: qemu, kqemu, kvm, xen
  • From: Florian Klink
• Re: internal error: unexcepted domain type lxc, excepted one of these: qemu, kqemu, kvm, xen
  • From: Eric Blake
• internal error: unexcepted domain type lxc, excepted one of these: qemu, kqemu, kvm, xen
  • From: Florian Klink
• guest daemon reading kvmclock - is it not needed or bad idea ?
  • From: Edoardo Comar
• guest daemon reading kvmclock - not needed/ bad idea ?
  • From: Edoardo Comar
• Re: assign static external IP to container
  • From: Gao feng
• list moderation policies [was: assign static public IP to container]
  • From: Eric Blake
• Re: assign static public IP to container
  • From: Eric Blake
• Re: assign static public IP to container
  • From: scar
• Re: assign static public IP to container
  • From: scar
• Re: Determine ongoing shutdown via libvirt or preventing migrations to host
  • From: Daniel P. Berrange
• Re: Determine ongoing shutdown via libvirt or preventing migrations to host
  • From: Ondřej Kunc
• Re: gentoo linux, problem starting vm´s when cache=none
  • From: Daniel P. Berrange
• Re: Determine ongoing shutdown via libvirt or preventing migrations to host
  • From: Daniel P. Berrange
• Re: assign static public IP to container
  • From: Eric Blake
• Determine ongoing shutdown via libvirt or preventing migrations to host
  • From: Ondřej Kunc
• assign static external IP to container
  • From: scar
• assign static external IP to container
  • From: scar
• Re: gentoo linux, problem starting vm´s when cache=none
  • From: Daniel P. Berrange
• gentoo linux, problem starting vm´s when cache=none
  • From: Marko Weber | ZBF
• Re: man page
  • From: Daniel P. Berrange
• Re: man page
  • From: Daniel P. Berrange
• virsh attach makes qcow2 format disk to raw format
  • From: lyz_pro@xxxxxxx
• ANNOUNCE: ruby-libvirt 0.5.0
  • From: Chris Lalancette
• Re: man page
  • From: Fl@sh
• Re: Question about setns recognising in libvirt autoconf
  • From: Gao feng
• Re: Question about setns recognising in libvirt autoconf
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: Question about setns recognising in libvirt autoconf
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: Question about setns recognising in libvirt autoconf
  • From: Gao feng
• Question about setns recognising in libvirt autoconf
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Libvirt support for KVM/ARM
  • From: 林佳緯
• assign static public IP to container
  • From: scar
• Re: how to add/remove emulated usb removable devices to guests
  • From: Alexandr Gluzskiy
• Re: correct way to hot-add cdrom ?
  • From: Alexandr Gluzskiy
• Re: man page
  • From: Fl@sh
• Re: man page
  • From: Eric Blake
• man page
  • From: Fl@sh
• libvirt, Open vSwitch and iptables
  • From: Yoann Juet
• Using Java bindings to event callback
  • From: Howie
• Re: correct way to hot-add cdrom ?
  • From: Daniel P. Berrange
• Re: correct way to hot-add cdrom ?
  • From: Alexandr Gluzskiy
• Re: Virsh snapshots
  • From: Kashyap Chamarthy
• Re: Virsh snapshots
  • From: Eric Blake
• Re: Virsh snapshots
  • From: Juraj Melo
• how to add/remove emulated usb removable devices to guests
  • From: Alexandr
• Re: libvirt, lvm thin provisioning
  • From: Eric Blake
• cputune shares with multiple cpu and pinning
  • From: Edoardo Comar
• Re: libvirt, lvm thin provisioning
  • From: Michael Mol
• Re: libvirt, lvm thin provisioning
  • From: Eric Blake
• Re: libvirt, lvm thin provisioning
  • From: Michael Mol
• virsh iface-list fail
  • From: Slash Sda
• Re: libvirt, lvm thin provisioning
  • From: Oliver Brakmann
• Re: error: Failed to start domain
  • From: Stefan G. Weichinger
• Re: error: Failed to start domain
  • From: Stefan G. Weichinger
• error: Failed to start domain
  • From: Stefan G. Weichinger
• Re: help about migration with libvirt
  • From: lei yang
• Re: help about migration with libvirt
  • From: Eric Blake
• Re: help about migration with libvirt
  • From: lei yang
• Re: layer2 tunnel between guests across hosts
  • From: Laine Stump
• Re: run libvirt API on arm hardware platform
  • From: Henrik Ahlgren
• Re: run libvirt API on arm hardware platform
  • From: Eric Blake
• run libvirt API on arm hardware platform
  • From: 林佳緯
• layer2 tunnel between guests across hosts
  • From: sujay g
• Re: help about migration with libvirt
  • From: Nicolas Sebrecht
• Problem booting guest with more than 8 disks
  • From: Jon
• help about migration with libvirt
  • From: lei yang
• Re: virsh detach typo
  • From: Eric Blake
• virsh detach typo
  • From: Mauricio Tavares
• Re: Virsh snapshots
  • From: Eric Blake
• Re: Does virsh support offline migration?
  • From: Eric Blake
• Re: Virsh snapshots
  • From: Kashyap Chamarthy
• Virsh snapshots
  • From: Juraj Melo
• correct way to hot-add cdrom ?
  • From: Alexandr
• Does virsh support offline migration?
  • From: me,apporc
• FYI: Wiki account self-registration disabled
  • From: Daniel P. Berrange
• Re: Fwd: Socket getting closed automatically after destroying vm.
  • From: Michal Privoznik
• Fwd: Socket getting closed automatically after destroying vm.
  • From: cool dharma06
• Socket getting closed automatically after destroying vm.
  • From: cool dharma06
• Re: Help required in simulating libvirt TLS server
  • From: Daniel P. Berrange
• Fw:Migration errors
  • From: Tony Gong
• Migration errors
  • From: Tony Gong
• Re: [libvirt] Help required in simulating libvirt TLS server
  • From: Eric Blake
• Help required in simulating libvirt TLS server
  • From: Arun Viswanath
• Hypervisor load much greater than that of the guest
  • From: Damion Parry
• Re: Help with Vrbr0
  • From: Gao feng
• Re: Scientific Linux as guest. Can't install with virt-manager because key "tab" in use
  • From: E Gerlach
• Re: Scientific Linux as guest. Can't install with virt-manager because key "tab" in use
  • From: E Gerlach
• Re: Scientific Linux as guest. Can't install with virt-manager because key "tab" in use
  • From: Michael Mol
• Scientific Linux as guest. Can't install with virt-manager because key "tab" in use
  • From: E Gerlach
• libvirt, lvm thin provisioning
  • From: Michael Mol
• centos4.8 system container not working on fedora 19 machine
  • From: Rahul Khengare
• Re: Query:: Reg: Libvirt Networking
  • From: Laine Stump
• Re: Query:: Reg: Libvirt Networking
  • From: Nehal J Wani
• Re: Query:: Reg: Libvirt Networking
  • From: Laine Stump
• Re: Help with Vrbr0
  • From: Sherin A
• Re: Help with Vrbr0
  • From: Sherin A
• Re: Help with Vrbr0
  • From: Sherin A
• Re: Help with Vrbr0
  • From: Sherin A
• Re: Help with Vrbr0
  • From: Gao feng
• Help with Vrbr0
  • From: Sherin A
• Query:: Reg: Libvirt Networking
  • From: Nehal J Wani
• Re: how to use virtio-blk-data-plane in libvirt
  • From: Daniel P. Berrange
• Re: facing some error in launching VM
  • From: Eric Blake
• Re: how to install libvirt-python
  • From: Eric Blake
• Re: libvirt-sandbox on Ubuntu with SELinux
  • From: Daniel P. Berrange
• how to use virtio-blk-data-plane in libvirt
  • From: Hui Kai Ran
• facing some error in launching VM
  • From: cool dharma06
• Re: how to install libvirt-python
  • From: Mahmood Naderan
• Error facing when starting the VM.
  • From: cool dharma06
• libvirt-sandbox on Ubuntu with SELinux
  • From: boden
• Re: how to install libvirt-python
  • From: Eric Blake
• Re: how to install libvirt-python
  • From: Mahmood Naderan
• Re: how to install libvirt-python
  • From: Mahmood Naderan
• Re: how to install libvirt-python
  • From: Eric Blake
• Re: how to install libvirt-python
  • From: Mahmood Naderan
• Re: how to install libvirt-python
  • From: Eric Blake
• how to install libvirt-python
  • From: Mahmood Naderan
• Re: Unable to configure libvirt
  • From: Mahmood Naderan
• Re: Unable to configure libvirt
  • From: Eric Blake
• Unable to configure libvirt
  • From: Mahmood Naderan
• Re: Failed to access the console after starting the lxc container
  • From: Daniel P. Berrange
• Failed to access the console after starting the lxc container
  • From: Aarti Sawant
• Re: virsh and multi source-dev
  • From: Matthieu Simonin
• 答复: libivrt issue report , 1.1.0 version, while migrate VMs between two hosts, is it solved or other way to avoid it, thanks
  • From: Guozhonghua
• Re: libivrt issue report , 1.1.0 version, while migrate VMs between two hosts, is it solved or other way to avoid it, thanks
  • From: Eric Blake
• libivrt issue report , 1.1.0 version, while migrate VMs between two hosts, is it solved or other way to avoid it, thanks
  • From: Guozhonghua
• Re: Unable to use more than 4 serial devices at once.
  • From: Cole Robinson
• Re: Using hostdev to plug a PCI-E host device into Q35 pcie-root port
  • From: Thomas Kuther
• Re: Using hostdev to plug a PCI-E host device into Q35 pcie-root port
  • From: Thomas Kuther
• Re: virsh and multi source-dev
  • From: Eric Blake
• Re: Asterisk, pci passthrough, and pri card
  • From: Laine Stump
• Re: macvtap direct and ip spoofing
  • From: vlad halilov
• Re: Using hostdev to plug a PCI-E host device into Q35 pcie-root port
  • From: Laine Stump
• Re: macvtap direct and ip spoofing
  • From: Laine Stump
• Re: virsh and multi source-dev
  • From: Matthieu Simonin
• Re: virsh and multi source-dev
  • From: Humble Chirammal
• virsh and multi source-dev
  • From: Matthieu Simonin
• macvtap direct and ip spoofing
  • From: vlad halilov
• Hot resize virtio-scsi device with multipath device backend
  • From: Baptiste AGASSE
• Re: Unable to use more than 4 serial devices at once.
  • From: Cole Robinson
• Unable to use more than 4 serial devices at once.
  • From: Matthew Harrold
• /var/lib/libvirt/images on BTRFS (it works!)
  • From: Gene Czarcinski
• Asterisk, pci passthrough, and pri card
  • From: Mauricio Tavares
• Using hostdev to plug a PCI-E host device into Q35 pcie-root port
  • From: Thomas Kuther
• Re: How to tell libvirt not to use qemu "accel=kvm" for a FreeBSD guest
  • From: Christian Gagneraud
• Re: How to tell libvirt not to use qemu "accel=kvm" for a FreeBSD guest
  • From: Christian Gagneraud
• Re: How to tell libvirt not to use qemu "accel=kvm" for a FreeBSD guest
  • From: Eric Blake
• Re: Problem about lxc-enter-namespace interface
  • From: Gao feng
• Re: Problem about lxc-enter-namespace interface
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: How to tell libvirt not to use qemu "accel=kvm" for a FreeBSD guest
  • From: Daniel P. Berrange
• Re: UTS namespace
  • From: Daniel P. Berrange
• Re: Problem about lxc-enter-namespace interface
  • From: Gao feng
• Re: Problem about lxc-enter-namespace interface
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: Problem about lxc-enter-namespace interface
  • From: Gao feng
• Re: Problem about lxc-enter-namespace interface
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: Problem about lxc-enter-namespace interface
  • From: Gao feng
• UTS namespace
  • From: Aarti Sawant
• Re: Problem about lxc-enter-namespace interface
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: Problem about lxc-enter-namespace interface
  • From: Gao feng
• Re: Problem about lxc-enter-namespace interface
  • From: Gao feng
• Re: User Namespace in LXC
  • From: Saurabh Deochake
• Problem about lxc-enter-namespace interface
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: How to tell libvirt not to use qemu "accel=kvm" for a FreeBSD guest
  • From: Christian Gagneraud
• Re: Doc/web site problems
  • From: Greg Ward
• How to tell libvirt not to use qemu "accel=kvm" for a FreeBSD guest
  • From: Christian Gagneraud
• Re: Migration function is not supported by the connection driver: virDomainMigrate2
  • From: Daniel P. Berrange
• Migration function is not supported by the connection driver: virDomainMigrate2
  • From: Joseph Perrin
• Re: Lots of threads and increased IO load
  • From: Gergely Horváth
• Re: Lots of threads and increased IO load
  • From: Gergely Horváth
• Re: Doc/web site problems
  • From: Eric Blake
• Re: Doc/web site problems
  • From: Greg Ward
• Re: Lots of threads and increased IO load
  • From: Eric Blake
• Lots of threads and increased IO load
  • From: Gergely Horváth
• Re: Problem with bridged network configuration
  • From: Bob
• Re: Problem with bridged network configuration
  • From: Laine Stump
• Re: User Namespace in LXC
  • From: Gao feng
• Re: User Namespace in LXC
  • From: Saurabh Deochake
• Re: Turning off polling
  • From: Daniel P. Berrange
• Turning off polling
  • From: Timothy Ehlers
• Re: Problem with bridged network configuration
  • From: Bob Doolittle
• Problem with bridged network configuration
  • From: Bob Doolittle
• InfiniBand Passthrough not working
  • From: Michael Kruse
• newer libvirt version issues
  • From: Franky Van Liedekerke
• Re: User Namespace in LXC
  • From: Gao feng
• Re: Doc/web site problems
  • From: Eric Blake
• Doc/web site problems
  • From: Greg Ward
• Re: Unable to shutdown/reboot a SLES 10 SP4 VM
  • From: Eric Blake
• Error in snapshot create in libvirt 1.1.4
  • From: Georg Meier
• Re: User Namespace in LXC
  • From: Saurabh Deochake
• Re: User Namespace in LXC
  • From: Gao feng
• User Namespace in LXC
  • From: Saurabh Deochake
• Unable to shutdown/reboot a SLES 10 SP4 VM
  • From: Padma Narwankar
• Re: virt-install not spawning VM
  • From: Martin Kletzander
• Re: RBD images locking
  • From: NEVEU Stephane
• Re: RBD images locking
  • From: Daniel P. Berrange
• virt-install not spawning VM
  • From: Sudarshan Pathalam (supathal)
• Re: RBD images locking
  • From: NEVEU Stephane
• Re: RBD images locking
  • From: Andrey Korolyov
• Re: RBD images locking
  • From: Eric Blake
• Re: RBD images locking
  • From: NEVEU Stephane
• Re: RBD images locking
  • From: Eric Blake
• RBD images locking
  • From: NEVEU Stephane
• Re: Calling 'virsh' from within a hook script - avoid deadlock?
  • From: TSADOK, Shlomi (Shlomi)
• Re: Calling 'virsh' from within a hook script - avoid deadlock?
  • From: Daniel P. Berrange
• Re: Calling 'virsh' from within a hook script - avoid deadlock?
  • From: Michal Privoznik
• Failing %check section.
  • From: Jan Olszak
• Installed (but unpackaged) file(s) found.
  • From: Jan Olszak
• Re: Calling 'virsh' from within a hook script - avoid deadlock?
  • From: Daniel P. Berrange
• Re: Calling 'virsh' from within a hook script - avoid deadlock?
  • From: TSADOK, Shlomi (Shlomi)
• Re: Calling 'virsh' from within a hook script - avoid deadlock?
  • From: Michal Privoznik
• Calling 'virsh' from within a hook script - avoid deadlock?
  • From: TSADOK, Shlomi (Shlomi)
• Re: Building libvirt for ARM tizen.
  • From: Jan Olszak
• Re: Building libvirt for ARM tizen.
  • From: Jan Olszak
• Re: virConnectListAllDomains support for PowerVM
  • From: Daniel P. Berrange
• Re: virConnectListAllDomains support for PowerVM
  • From: Camilo Aguilar
• Re: virConnectListAllDomains support for PowerVM
  • From: Daniel P. Berrange
• virConnectListAllDomains support for PowerVM
  • From: Camilo Aguilar
• Re: Building libvirt for ARM tizen.
  • From: Daniel P. Berrange
• libvirt networking using VLAN Tag basics
  • From: Dan Sa
• Re: Building libvirt for ARM tizen.
  • From: Eric Blake
• Building libvirt for ARM tizen.
  • From: Jan Olszak
• Using resource pools (in vmware vcenter) with libvirt
  • From: Ashutosh Bisht
• Re: Using certtool to generate certificates for ESXi
  • From: Shiva Bhanujan
• Re: USB passthrough to WinXP guest - WinXP ignores it
  • From: E Gerlach
• USB passthrough to WinXP guest - WinXP ignores it
  • From: E Gerlach
• Re: [Qemu-devel] About VM fork in QEMU
  • From: Xinyang Ge
• Fwd: Help regarding virsh domifstat
  • From: Rohit Bhat
• Re: libvirt_lxc causes cpu 100% usage
  • From: zhongjj
• Re: libvirt_lxc causes cpu 100% usage
  • From: jj
• Re: libvirt_lxc causes cpu 100% usage
  • From: Daniel P. Berrange
• Re: libvirt_lxc causes cpu 100% usage
  • From: jj zhong
• Re: upstart script for virtlockd
  • From: Eric Blake
• Re: libvirt_lxc: SELinux MCS
  • From: Daniel P. Berrange
• Re: libvirt_lxc: SELinux MCS
  • From: Matteo Piccinini
• Re: libvirt_lxc: SELinux MCS
  • From: Daniel P. Berrange
• libvirt_lxc: SELinux MCS
  • From: Matteo Piccinini
• Re: libvirt-lxc driver on armv7l
  • From: Daniel P. Berrange
• Re: libvirt-lxc without libvirt
  • From: Daniel P. Berrange
• libvirt-lxc without libvirt
  • From: Jan Olszak
• Re: libvirt-lxc driver on armv7l
  • From: Jan Olszak
• Re: Using certtool to generate certificates for ESXi
  • From: Matthias Bolte
• Re: Fwd: libvirt unsupport rbd storage pool? "missing backend for pool type 8"
  • From: Eric Blake
• Re: libvirt_lxc causes cpu 100% usage
  • From: jj
• Fwd: libvirt unsupport rbd storage pool? "missing backend for pool type 8"
  • From: 卢惠勇
• Re: libvirt_lxc causes cpu 100% usage
  • From: jj
• Upgraded to F18: now machines won't start
  • From: Sean Darcy
• Re: libvirt-lxc driver on armv7l
  • From: Daniel P. Berrange
• Re: Using certtool to generate certificates for ESXi
  • From: Shiva Bhanujan
• libvirt-lxc driver on armv7l
  • From: Jan Olszak
• virsh esx return "error: internal error: Could not find Datacenter"
  • From: Andrea Buzzi (abuzzi)
• Re: A RFE for libvirt
  • From: shyu
• Re: A RFE for libvirt
  • From: Daniel P. Berrange
• A RFE for libvirt
  • From: shyu
• Re: Using certtool to generate certificates for ESXi
  • From: Daniel P. Berrange
• Re: Automatically assign static ipv4 via dhcp to new VMs
  • From: Laine Stump
• Re: bridged networking using VLAN : guest with 2 NIC
  • From: Laine Stump
• Re: sr-iov with openvswitch possible?
  • From: Vasiliy Tolstov
• Re: sr-iov with openvswitch possible?
  • From: Laine Stump
• Re: libvirt_lxc causes cpu 100% usage
  • From: jj
• Using certtool to generate certificates for ESXi
  • From: Shiva Bhanujan
• Re: Installing tcp/ssh drivers for libvirt
  • From: Eric Blake
• Re: Installing tcp/ssh drivers for libvirt
  • From: Shiva Bhanujan
• Re: Installing tcp/ssh drivers for libvirt
  • From: Eric Blake
• Installing tcp/ssh drivers for libvirt
  • From: Shiva Bhanujan
• Re: Unable to provision VM attaching it directly to a OVS bridge
  • From: Lucas Brasilino
• Unable to provision VM attaching it directly to a OVS bridge
  • From: Lucas Brasilino
• Re: [Qemu-devel] About VM fork in QEMU
  • From: Eric Blake
• Re: [Qemu-devel] About VM fork in QEMU
  • From: Xinyang Ge
• Re: [Qemu-devel] About VM fork in QEMU
  • From: Xinyang Ge
• Re: [Qemu-devel] About VM fork in QEMU
  • From: Eric Blake
• Re: [Qemu-devel] About VM fork in QEMU
  • From: Xinyang Ge
• bridged networking using VLAN : guest with 2 NIC
  • From: Dan Sa
• Re: Is it possible to define serial port speed?
  • From: Daniel P. Berrange
• Is it possible to define serial port speed?
  • From: Marco André Dinis
• how can I use libvirt to connect vbox
  • From: hackxay
• Re: virsh migrate fails with Input/output error
  • From: Tim
• Automated hashdeep and upgrade for VMs
  • From: Sean Alexandre
• libvirt_lxc causes cpu 100% usage
  • From: jj zhong
• libvirt_lxc causes cpu 100% usage
  • From: 止语
• sr-iov with openvswitch possible?
  • From: Vasiliy Tolstov
• Re: cannot attach device using libvirt
  • From: Michal Privoznik
• cannot attach device using libvirt
  • From: song
• Re: kvm/libvirt can't use vmdk files? qemu: 'vmdk' invalid format
  • From: Hammad Siddiqi
• hotplug is not supported
  • From: song
• Exploring linbvirt.
  • From: cooldharma06
• help with VM migration problem: getfd, SCM_RIGHTS
  • From: Joe Linoff
• Re: Create RBD Format 2 disk images with qemu-image
  • From: Jon
• Re: Create RBD Format 2 disk images with qemu-image
  • From: Josh Durgin
• Re: upstart script for virtlockd
  • From: NEVEU Stephane
• [FWD: [Qemu-devel] KVM Forum 2013 presentations on Google+ (Hangouts on-air)]
  • From: Daniel P. Berrange
• Re: migrate & virtlockd
  • From: NEVEU Stephane
• Re: Automatically assign static ipv4 via dhcp to new VMs
  • From: Tim
• Re: Building XML from working qemu command-line for ARM virtio
  • From: Eric Blake
• Building XML from working qemu command-line for ARM virtio
  • From: Clark Laughlin
• Create RBD Format 2 disk images with qemu-image
  • From: Jon
• Re: libvirtError: Unable to add bridge br0 port vnet0: Operation not supported
  • From: Maciej Gałkiewicz
• Re: libvirtError: Unable to add bridge br0 port vnet0: Operation not supported
  • From: Daniel P. Berrange
• libvirt_lxc: "reboot -f" causes libvirt_lxc process to stop, but domain is still "running" for libvirt
  • From: Florian Klink
• Re: libvirtError: Unable to add bridge br0 port vnet0: Operation not supported
  • From: Maciej Gałkiewicz
• Re: libvirtError: Unable to add bridge br0 port vnet0: Operation not supported
  • From: Daniel P. Berrange
• libvirtError: Unable to add bridge br0 port vnet0: Operation not supported
  • From: Maciej Gałkiewicz
• Re: qemuMonitorIO internal error
  • From: Francois Gaudreault
• virDomainGetCPUStats missing in Java API bindings ?
  • From: Atul Gosain
• Re: qemuMonitorIO internal error
  • From: Michal Privoznik
• virsh migrate fails with Input/output error
  • From: Tim
• Re: qemuMonitorIO internal error
  • From: Francois Gaudreault
• Kvm Libvirt dirty page log facility
  • From: hellen maziku
• Re: Xen - 4.2.1 with libvirt-1.1.3
  • From: cooldharma06
• Re: event handler
  • From: Alexandr
• Re: event handler
  • From: Michal Privoznik
• Re: event handler
  • From: Alexandr
• migrate & virtlockd
  • From: NEVEU Stephane
• Re: event handler
  • From: Michal Privoznik
• Re: event handler
  • From: Alexandr
• Re: [libvirt] Guide to view the libvirt source.
  • From: Osier Yang
• Xen - 4.2.1 with libvirt-1.1.3
  • From: cooldharma06
• Re: event handler
  • From: Michal Privoznik
• Re: migration error virsh 0.10
  • From: Michal Privoznik
• Re: qemuMonitorIO internal error
  • From: Michal Privoznik
• event handler
  • From: Alexandr
• ps/2 mouse cannot be removed from guest
  • From: Hisao Taguchi
• migration error virsh 0.10
  • From: song
• qemuMonitorIO internal error
  • From: Francois Gaudreault
• Re: upstart script for virtlockd
  • From: Eric Blake
• upstart script for virtlockd
  • From: NEVEU Stephane
• Re: pom for 0.5.1
  • From: Daan Hoogland
• Re: pom for 0.5.1
  • From: Doug Goldstein
• pom for 0.5.1
  • From: Daan Hoogland
• Re: failing connections w/ virt-manager
  • From: Martin Kletzander
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• @problem in vm while accessing internet
  • From: anagha b
• Testing Xen on Fedora 20...
  • From: Dario Faggioli
• Re: failing connections w/ virt-manager
  • From: Martin Kletzander
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• Re: [Xen-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Eric Blake
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Eric Blake
• Re: Automatically assign static ipv4 via dhcp to new VMs (Tim)
  • From: Laine Stump
• Re: Automatically assign static ipv4 via dhcp to new VMs
  • From: Laine Stump
• Re: network filter and openvswitch bridge
  • From: Laine Stump
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Dario Faggioli
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Dario Faggioli
• Re: [Xen-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Ian Campbell
• Re: [Xen-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• Re: [Xen-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Ian Campbell
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• libvirt crash when using libxl (xen 4.3)
  • From: dienet
• Re: Automatically assign static ipv4 via dhcp to new VMs (Tim)
  • From: Chandana De Silva
• Re: Bringing up a guest with network disabled
  • From: James Gibbon
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• Re: [libvirt] Changing test_driver.c file
  • From: Eric Blake
• Changing test_driver.c file
  • From: Arun Viswanath
• Xen Project Developer Summit: check the schedule and register!
  • From: Dario Faggioli
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Jim Fehlig
• Automatically assign static ipv4 via dhcp to new VMs
  • From: Tim
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Dario Faggioli
• Re: [libvirt] Guide to view the libvirt source.
  • From: Eric Blake
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• Guide to view the libvirt source.
  • From: cooldharma06
• Re: failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• failing connections w/ virt-manager
  • From: Stefan G. Weichinger
• passthrough shared dir with kvm: need to run as root?
  • From: Raphael Bauduin
• Re: Snapshots: Where they are stored and how to use them?
  • From: Kashyap Chamarthy
• Re: Snapshots: Where they are stored and how to use them?
  • From: Eric Blake
• Re: Bridging Wireless Cards for KVM
  • From: Joshua McKee
• Re: Accessing the host server's file system from a guest OS
  • From: Daniel P. Berrange
• Accessing the host server's file system from a guest OS
  • From: Roland Giesler
• Snapshots: Where they are stored and how to use them?
  • From: Roland Giesler
• Re: Bringing up a guest with network disabled
  • From: Jorge Fábregas
• Re: Bringing up a guest with network disabled
  • From: Gao Yongwei
• Re: Bringing up a guest with network disabled
  • From: Jorge Fábregas
• Re: Bringing up a guest with network disabled
  • From: Eric Blake
• network filter and openvswitch bridge
  • From: Pavel Tokarev
• Re: Bringing up a guest with network disabled
  • From: James Gibbon
• Re: Bringing up a guest with network disabled
  • From: Eric Blake
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Eric Blake
• Bringing up a guest with network disabled
  • From: James Gibbon
• Re: libvirt installtion.
  • From: Eric Blake
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• Re: LXC, libvrt-1.1.2-r3 (Gentoo), "/dev/tty12", mount /dev with inverse of 'nodev'?
  • From: Daniel P. Berrange
• libvirt installtion.
  • From: cooldharma06
• LXC, libvrt-1.1.2-r3 (Gentoo), "/dev/tty12", mount /dev with inverse of 'nodev'?
  • From: Dennis Jenkins
• Re: Unable to start libvirt_lxc domain a second time after shutdown
  • From: Florian Klink
• Re: Does libvirt support xapi/xe toolstack?
  • From: Dario Faggioli
• Re: virt-manager could not start with error "version `LIBVIRT_PRIVATE_0.10.2' not found "
  • From: Eric Blake
• Re: Does libvirt support xapi/xe toolstack?
  • From: Guillaume Thouvenin
• Re: Unable to start libvirt_lxc domain a second time after shutdown
  • From: Daniel P. Berrange
• Unable to start libvirt_lxc domain a second time after shutdown
  • From: Florian Klink
• Re: Does libvirt support xapi/xe toolstack?
  • From: Guillaume Thouvenin
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Dario Faggioli
• virt-manager could not start with error "version `LIBVIRT_PRIVATE_0.10.2' not found "
  • From: jimmy he
• Re: [Xen-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Ian Campbell
• Re: Does libvirt support xapi/xe toolstack?
  • From: Guillaume Thouvenin
• Re: virNodeInfo returns MBytes instead of bytes
  • From: Michal Privoznik
• Re: Does libvirt support xapi/xe toolstack?
  • From: Daniel P. Berrange
• Re: Does libvirt support xapi/xe toolstack?
  • From: Guillaume Thouvenin
• Re: virNodeInfo returns MBytes instead of bytes
  • From: Daniel P. Berrange
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• virNodeInfo returns MBytes instead of bytes
  • From: Sam Giraffe
• Re: libvirt: How to boot VM in esx?
  • From: Felicitus
• Re: libvirt: How to boot VM in esx?
  • From: varun bhatnagar
• libvirt: How to boot VM in esx?
  • From: varun bhatnagar
• Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: Dario Faggioli
• libvirt+python on windows support
  • From: yao xu
• Re: getting an error when installing LIBVIRT.
  • From: Thomas Stein
• Re: getting an error when installing LIBVIRT.
  • From: cooldharma06
• Re: Strange results with QoS definition
  • From: Michal Privoznik
• Does libvirt support xapi/xe toolstack?
  • From: Guillaume Thouvenin
• Re: getting an error when installing LIBVIRT.
  • From: Eric Blake
• getting an error when installing LIBVIRT.
  • From: cooldharma06
• Strange results with QoS definition
  • From: Patrick Herzfeld
• Re: virtio channel socket bind error
  • From: Cristian Ciupitu
• connecting with the libvirt daemon on xen+debian
  • From: Aamir A R
• (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
  • From: cooldharma06
• Re: [libvirt] Is it possible to attach a harddisk to an ESX node
  • From: varun bhatnagar
• how to boot the lxc container with a default ip
  • From: lei yang
• Re: [libvirt] virDomainGetInfo() returns wrong domain state
  • From: Michal Privoznik
• Re: [libvirt] virDomainGetInfo() returns wrong domain state
  • From: Panday Ritesh Sharma (rpanday)
• Re: SR-IOV Pool Availability
  • From: Laine Stump
• Re: Migrate hangs at 99%
  • From: Gergely Horváth
• Re: [Xen-devel] Error i am getting when using libvirt in xen 4.2
  • From: Dario Faggioli
• Re: virtio channel socket bind error
  • From: Michal Privoznik
• Re: [libvirt] Is it possible to attach a harddisk to an ESX node
  • From: Michal Privoznik
• Re: [libvirt] virDomainGetInfo() returns wrong domain state
  • From: Michal Privoznik
• Is it possible to attach a harddisk to an ESX node
  • From: varun bhatnagar
• Re: Collecting system stats
  • From: Sam Giraffe
• Re: Collecting system stats
  • From: Peter Phaal
• Re: virtio channel socket bind error
  • From: Chunduru Venkata, Ravi
• Re: virtio channel socket bind error
  • From: Chunduru Venkata, Ravi
• virtio channel socket bind error
  • From: Chunduru Venkata, Ravi
• Collecting system stats
  • From: Sam Giraffe
• Re: how to mount /dev/shm on system container
  • From: Aarti Sawant
• Re: Migrate hangs at 99%
  • From: Anthony Bourguignon
• Re: virDomainGetInfo() returns wrong domain state
  • From: Panday Ritesh Sharma (rpanday)
• Re: VM with ceph backend snapshot-revert error
  • From: Josh Durgin
• Migrate hangs at 99%
  • From: Gergely Horváth
• virDomainGetInfo() returns wrong domain state
  • From: Panday Ritesh Sharma (rpanday)
• creating snapshots for sheepdog with libvirt API
  • From: Pavel Tokarev
• How to create snapshots for sheepdog with libvirt API
  • From: Pavel Tokarev
• Using a shared LVM volume group for both virtual disks and host filesystems
  • From: Edoardo Comar
• Re: how to mount /dev/shm on system container
  • From: Daniel P. Berrange
• how to mount /dev/shm on system container
  • From: Aarti Sawant
• VM with ceph backend snapshot-revert error
  • From: 王根意
• Re: problem with sheepdog backend when creating a pool
  • From: Osier Yang
• Re: Expanding an LVM Storage Pool
  • From: Osier Yang
• Re: Specify mount option for Storage-Pool
  • From: Osier Yang
• Re: Expanding an LVM Storage Pool
  • From: McEvoy, James
• Libvirt ESX: Image file not getting copied to ESX server
  • From: varun bhatnagar
• Re: Incremental Backups
  • From: Daniel Berteaud
• Re: Incremental Backups
  • From: Thomas Stein
• Re: Incremental Backups
  • From: Daniel Berteaud
• Re: Incremental Backups
  • From: Thomas Stein
• Re: Incremental Backups
  • From: Davide Guerri
• Expanding an LVM Storage Pool
  • From: McEvoy, James
• Re: Incremental Backups
  • From: Davide Guerri
• Specify mount option for Storage-Pool
  • From: Jorge Fábregas
• Re: Incremental Backups
  • From: Thomas Stein
• Re: Incremental Backups
  • From: fernando
• Re: Incremental Backups
  • From: Davide Guerri
• Re: Incremental Backups
  • From: Thomas Stein
• Re: Incremental Backups
  • From: Davide Guerri
• Incremental Backups
  • From: Thomas Stein
• Re: Trouble using virStream with callbacks
  • From: Daniel P. Berrange
• Re: SR-IOV Pool Availability
  • From: Dax Kelson
• Re: Trouble using virStream with callbacks
  • From: Jonathan Lebon
• Libvirt not able to attach console to VM on ESX hypervisor
  • From: varun bhatnagar
• Re: Trouble using virStream with callbacks
  • From: Daniel P. Berrange
• Re: Trouble using virStream with callbacks
  • From: Jonathan Lebon
• Re: Trouble using virStream with callbacks
  • From: Daniel P. Berrange
• Re: Trouble using virStream with callbacks
  • From: Jonathan Lebon
• Fwd: Specifying a USB Device to use USB2 Controller
  • From: Cameron Curle
• Trouble using virStream with callbacks
  • From: Jonathan Lebon
• problem with sheepdog backend when creating a pool
  • From: Giovanni Bellac
• libvirt report error "error: End of file while reading data: Input/output error" when start domain
  • From: Bing Bu Cao
• Re: [libvirt] Doc v2: How to use NPIV in libvirt
  • From: Osier Yang
• Doc v2: How to use NPIV in libvirt
  • From: Osier Yang
• Re: libvirt-users Digest, Vol 45, Issue 28
  • From: Matthias Babisch
• Re: Finding out CPU topology.
  • From: Peeyush Gupta
• Re: Finding out CPU topology.
  • From: Daniel P. Berrange
• Finding out CPU topology.
  • From: Peeyush Gupta
• Re: Regarding libvirt usage
  • From: Eric Blake
• Re: Regarding libvirt usage
  • From: Manzoor Ahamed
• Re: Regarding libvirt usage
  • From: vonNieda, Adam (USMS)
• Doc: How to use NPIV in libvirt
  • From: Osier Yang
• Re: Regarding libvirt usage
  • From: Eric Blake
• Regarding libvirt usage
  • From: Manzoor Ahamed
• Re: [libvirt] Doc: How to use NPIV in libvirt
  • From: Dennis Jenkins
• Re: Questions on how to reset ID numbers for virt Guests.
  • From: Eric Blake
• Re: Questions on how to reset ID numbers for virt Guests.
  • From: James Sparenberg
• Re: libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
  • From: Doug Goldstein
• Re: libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
  • From: Dennis Jenkins
• Re: Help needed in simulating libvirt
  • From: Arun Viswanath
• Re: Help needed in simulating libvirt
  • From: Daniel P. Berrange
• Re: Help needed in simulating libvirt
  • From: Arun Viswanath
• Re: Help needed in simulating libvirt
  • From: Daniel P. Berrange
• Re: libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
  • From: Gao feng
• Re: libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
  • From: Daniel P. Berrange
• Re: Questions on how to reset ID numbers for virt Guests.
  • From: Daniel P. Berrange
• Re: Questions on how to reset ID numbers for virt Guests.
  • From: Paolo Bonzini
• Re: Help needed in simulating libvirt
  • From: Arun Viswanath
• Specifying a USB Device to use USB2 Controller
  • From: Cameron Curle
• Re: libvirt-1.1.2-r1 (Gentoo) fails to start LXC containers (subject line minor edit, was libvirt-1.2.2-r1)
  • From: Dennis Jenkins
• Re: libvirt-1.1.2-r1 (Gentoo) fails to start LXC containers (subject line minor edit, was libvirt-1.2.2-r1)
  • From: Dennis Jenkins
• Re: libvirt-1.1.2-r1 (Gentoo) fails to start LXC containers (subject line minor edit, was libvirt-1.2.2-r1)
  • From: Dennis Jenkins
• Re: Help needed in simulating libvirt
  • From: Eric Blake
• Re: libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
  • From: Doug Goldstein
• Help needed in simulating libvirt
  • From: Arun Viswanath
• Re: how to setup network filter
  • From: Gao Yongwei
• libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
  • From: Dennis Jenkins
• Re: Problems with user namespaces
  • From: Gao feng
• Re: Problems with user namespaces
  • From: Jaka Hudoklin
• Re: LVM Thin Volumes & Storage Pools
  • From: Osier Yang
• Re: Problems with user namespaces
  • From: Jaka Hudoklin
• Re: LVM Thin Volumes & Storage Pools
  • From: Jorge Fábregas
• Re: How to insert vcpupin in guest xml file
  • From: hzguanqiang@xxxxxxxxxxxxxxxx
• Re: Cannot create a volume
  • From: Daniele
• Re: Error Attaching Seventh VirtIO-SCSI Device to Guest
  • From: Osier Yang
• Re: LVM Thin Volumes & Storage Pools
  • From: Osier Yang
• Re: How to insert vcpupin in guest xml file
  • From: hongming
• Re: LVM Thin Volumes & Storage Pools
  • From: Jorge Fábregas
• Re: LVM Thin Volumes & Storage Pools
  • From: Osier Yang
• Re: Problems with user namespaces
  • From: Gao feng
• LVM Thin Volumes & Storage Pools
  • From: Jorge Fábregas
• internal error: unexpected migration status in setup
  • From: Thomas Stein
• Re: Error Attaching Seventh VirtIO-SCSI Device to Guest
  • From: McEvoy, James
• Re: Can I run a KVM guest with a btrfs subvolume as file system?
  • From: Thomas Koch
• Can I run a KVM guest with a btrfs subvolume as file system?
  • From: Thomas Koch
• Re: Cannot create a volume
  • From: Osier Yang
• Re: Error Attaching Seventh VirtIO-SCSI Device to Guest
  • From: Osier Yang
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Eric Blake
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Compiling libvirt for Xenserver 6.2
  • From: Faisal Ali
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Christophe Fergeau
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Eric Blake
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Daniel P. Berrange
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Eric Blake
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Christophe Fergeau
• Re: Problems with user namespaces
  • From: Jaka Hudoklin
• Re: Problems with user namespaces
  • From: Jaka Hudoklin
• Re: Problems with user namespaces
  • From: Gao feng
• Re: [Spice-devel] [virt-tools-list] Is virsh supposed to work on Windows?
  • From: i iordanov
• Re: [Spice-devel] [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Problems with user namespaces
  • From: Jaka Hudoklin
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Christophe Fergeau
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Christophe Fergeau
• Re: SR-IOV Pool Availability
  • From: Brian Rak
• Cannot create a volume
  • From: Daniele
• windows guest network kept down automatically when several windows guest running in one KVM host,
  • From: cochen
• Re: SR-IOV Pool Availability
  • From: hongming
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Marc-André Lureau
• Re: [Spice-devel] [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Marc-André Lureau
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Re: [virt-tools-list] Is virsh supposed to work on Windows?
  • From: Eric Blake
• Is virsh supposed to work on Windows?
  • From: Fernando Lozano
• Create ESXi vmknic using libvirt xml
  • From: varun bhatnagar
• Re: No valid cgroup for machine...
  • From: Jaka Hudoklin
• Re: Customize UNIX socket permissions
  • From: Daniel P. Berrange
• Re: No valid cgroup for machine...
  • From: Gao feng
• 答复: Is virsh blockcommit supported? Thanks a lot
  • From: Guozhonghua
• No valid cgroup for machine...
  • From: Jaka Hudoklin
• Error Attaching Seventh VirtIO-SCSI Device to Guest
  • From: McEvoy, James
• Re: Is virsh blockcommit supported? Thanks a lot
  • From: Eric Blake
• Is virsh blockcommit supported? Thanks a lot
  • From: Guozhonghua
• 答复: Is virsh blockcommit supported? Thanks a lot
  • From: Guozhonghua
• Re: libvirt-qemu/kvm passthru w/Intel 82598EB
  • From: Doug Goldstein
• Customize UNIX socket permissions
  • From: Jonathan Lebon
• Re: Is virsh blockcommit supported? Thanks a lot
  • From: Eric Blake
• remote xenserver problem
  • From: linxiao.st@xxxxxxxxxxxxxx
• how to setup network filter
  • From: Jiaan Zeng
• Re: error: virDBusCallMethod
  • From: Thomas Stein
• Re: error: virDBusCallMethod
  • From: Gao feng
• error: virDBusCallMethod
  • From: Thomas Stein
• Is virsh blockcommit supported? Thanks a lot
  • From: Guozhonghua
• libvirt_lxc heavy cpu usage ?
  • From: zhongjj
• Running libvirt on a virtualized server
  • From: Andre Gustavo Pereira da Silva
• How to add uplink in ESXi virtual switch
  • From: varun bhatnagar
• how to setup network filter
  • From: Jiaan Zeng
• Redhat VM is not getting IP from DHCP
  • From: Praveen Kumar
• libvirt-qemu/kvm passthru w/Intel 82598EB
  • From: laurence.schuler
• Re: Migration Clarification Request
  • From: Eric Blake
• Re: Finding out CPU topology
  • From: Peter Krempa
• Re: Defining VM with snapshots?
  • From: Eric Blake
• SR-IOV Pool Availability
  • From: Brian Rak