Linux Serial

• Thread Index

• Re: [PATCH 2/2 v2] serial: Add support for Fintek F81216A LPC to 4 UART
  • From: One Thousand Gnomes
• [PATCH 2/2 v2] serial: Add support for Fintek F81216A LPC to 4 UART
  • From: Ricardo Ribalda Delgado
• Re: [PATCH 1/2] serial/8250: Add support for RS485 IOCTLs
  • From: Ricardo Ribalda Delgado
• Re: [PATCH 2/2] serial: Add support for Fintek F81216A LPC to 4 UART
  • From: Ricardo Ribalda Delgado
• Re: ARC fails to boot on linux-next of 20140711
  • From: Rob Herring
• Re: [PATCH 2/2] serial: Add support for Fintek F81216A LPC to 4 UART
  • From: One Thousand Gnomes
• Re: [PATCH 1/2] serial/8250: Add support for RS485 IOCTLs
  • From: One Thousand Gnomes
• Re: [PATCH] tty: serial: serial_core.c: printk replacement
  • From: Sudip Mukherjee
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Vinod Koul
• Re: ARC fails to boot on linux-next of 20140711
  • From: Grant Likely
• Re: ARC fails to boot on linux-next of 20140711
  • From: Grant Likely
• [PATCH] pch_uart: don't hardcode PCI slot to get DMA device
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: serial_core.c: printk replacement
  • From: Sudip Mukherjee
• Re: [PATCH] tty: serial: serial_core.c: printk replacement
  • From: Jiri Slaby
• [PATCH] tty: serial: serial_core.c: printk replacement
  • From: Sudip Mukherjee
• Re: [PATCH 2/7] dmaengine: omap-dma: complete the transfer on terminate_all
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 5/7] arm: dts: am33xx: add DMA properties for UART
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 6/7] arm: dts: dra7: add DMA properties for UART
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 4/7] serial: 8250_dma: enqueue RX dma again on completion.
  • From: Sebastian Andrzej Siewior
• [PATCH 3/7] serial: 8250_dma: continue TX dma on dma error
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 7/7] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior
• [PATCH 2/7] dmaengine: omap-dma: complete the transfer on terminate_all
  • From: Sebastian Andrzej Siewior
• [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior
• dma support for 8250-omap serial driver
  • From: Sebastian Andrzej Siewior
• [PATCH 2/2] serial: Add support for Fintek F81216A LPC to 4 UART
  • From: Ricardo Ribalda Delgado
• [PATCH 1/2] serial/8250: Add support for RS485 IOCTLs
  • From: Ricardo Ribalda Delgado
• [PATCH 3/3] tty: omap-serial: support setting of hardware flow control in dts
  • From: Frans Klaver
• [PATCH 2/3] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver
• [PATCH 1/3] tty: omap-serial: prevent division by zero
  • From: Frans Klaver
• [RFC PATCH 0/3] omap-serial high-speed fixes/improvements
  • From: Frans Klaver
• [PATCH 2/3] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver
• [PATCH 3/3] tty: omap-serial: support setting of hardware flow control in dts
  • From: Frans Klaver
• [PATCH 1/3] tty: omap-serial: prevent division by zero
  • From: Frans Klaver
• [RFC PATCH 0/3] omap-serial high-speed fixes/improvements
  • From: Frans Klaver
• Re: [PATCH 1/3] tty: omap-serial: prevent division by zero
  • From: Frans Klaver
• Re: [PATCH 3/3] driver:gpio remove all usage of gpio_remove retval in driver
  • From: Tomi Valkeinen
• Re: Mainline commit "serial: Test for no tx data on tx restart" not correct for i.MX6?
  • From: jiwang
• Re: Support for RS485 on 8250 clone
  • From: Jiří Prchal
• Re: fsl_lpuart/VF610: Division by zero.
  • From: Bill Pringlemeir
• Re: Support for RS485 on 8250 clone
  • From: Grant Edwards
• Re: [PATCH] tty: serial: serial_core.c: printk replacement
  • From: Greg KH
• Support for RS485 on 8250 clone
  • From: Ricardo Ribalda Delgado
• [PATCH] tty: serial: serial_core.c: printk replacement
  • From: Sudip Mukherjee
• Re: [PATCH v1 1/3] PCI: export pci_get_dma_device() helper to other users
  • From: Alex Williamson
• Re: [PATCH v1 1/3] PCI: export pci_get_dma_device() helper to other users
  • From: Andy Shevchenko
• Re: REVERT request for patch "ARC: [arcfpga] stdout-path now suffices for earlycon/console" added to tty tree
  • From: Greg KH
• REVERT request for patch "ARC: [arcfpga] stdout-path now suffices for earlycon/console" added to tty tree
  • From: Vineet Gupta
• Re: ARC fails to boot on linux-next of 20140711
  • From: Vineet Gupta
• Re: ARC fails to boot on linux-next of 20140711
  • From: Rob Herring
• Re: ARC fails to boot on linux-next of 20140711
  • From: Grant Likely
• Re: ARC fails to boot on linux-next of 20140711
  • From: Guenter Roeck
• Re: fsl_lpuart/VF610: Division by zero.
  • From: Stefan Agner
• Re: ARC fails to boot on linux-next of 20140711
  • From: Vineet Gupta
• Re: ARC fails to boot on linux-next of 20140711
  • From: Vineet Gupta
• Re: ARC fails to boot on linux-next of 20140711
  • From: Grant Likely
• fsl_lpuart/VF610: Division by zero.
  • From: Bill Pringlemeir
• Re: fsl_lpuart/VF610: Division by zero.
  • From: Bill Pringlemeir
• [PATCH] serial: sc16is7xx: Correct initialization of s->clk
  • From: jon
• Re: [PATCH v1 1/3] PCI: export pci_get_dma_device() helper to other users
  • From: Alex Williamson
• re: serial: sc16is7xx
  • From: Jon Ringle
• Re: ARC fails to boot on linux-next of 20140711
  • From: Rob Herring
• [PATCH v1 3/3] spi: topcliff-pch: use pci_get_dma_device() helper
  • From: Andy Shevchenko
• [PATCH v1 1/3] PCI: export pci_get_dma_device() helper to other users
  • From: Andy Shevchenko
• [PATCH v1 2/3] pch_uart: use pci_get_dma_device() helper
  • From: Andy Shevchenko
• re: serial: sc16is7xx
  • From: Dan Carpenter
• Re: ARC fails to boot on linux-next of 20140711
  • From: Vineet Gupta
• ARC fails to boot on linux-next of 20140711
  • From: Vineet Gupta
• [PATCH 1/2] serial: st-asc: Don't call BUG in asc_console_setup()
  • From: Maxime COQUELIN
• [PATCH 0/2] serial: st-asc: Couple of fixes
  • From: Maxime COQUELIN
• [PATCH 2/2] serial: st-asc: Fix overflow in baudrate calculation
  • From: Maxime COQUELIN
• Re: Mainline commit "serial: Test for no tx data on tx restart" not correct for i.MX6?
  • From: Peter Hurley
• Re: Mainline commit "serial: Test for no tx data on tx restart" not correct for i.MX6?
  • From: jiwang
• Re: [PATCH] tty: serial: msm: Make of_device_id array const
  • From: Stephen Boyd
• Re: Mainline commit "serial: Test for no tx data on tx restart" not correct for i.MX6?
  • From: Peter Hurley
• [PATCH v5 0/2] serial: 8250_dw: optional reset control and deferred probe support
  • From: Chen-Yu Tsai
• [PATCH v5 1/2] serial: 8250_dw: Add optional reset control support
  • From: Chen-Yu Tsai
• [PATCH v5 2/2] serial: 8250_dw: Add support for deferred probing
  • From: Chen-Yu Tsai
• Re: dw8250_set_termios() questions
  • From: Alex Elder
• [PATCH] tty: serial: msm: Make of_device_id array const
  • From: Kiran Padwal
• Re: [PATCH] serial/core: Fix too big allocation for attribute member
  • From: Daniel Thompson
• Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: Daniel Drake
• [PATCH] serial/core: Fix too big allocation for attribute member
  • From: Yoshihiro YUNOMAE
• Mainline commit "serial: Test for no tx data on tx restart" not correct for i.MX6?
  • From: Dirk Behme
• Re: [PATCH 3/3] driver:gpio remove all usage of gpio_remove retval in driver
  • From: Linus Walleij
• Re: [PATCH 1/3] serial: sh-sci: Updated calculation of bit error rate and bit rate
  • From: Simon Horman
• Re: [PATCH] exynos: serial clear and set big endian fix
  • From: Mark Brown
• Re: [PATCH] exynos: serial clear and set big endian fix
  • From: Arnd Bergmann
• [PATCH] exynos: serial clear and set big endian fix
  • From: Mark Brown
• Re: [PATCH 3/6] tty: serial: 8250 core: add runtime pm
  • From: Mika Westerberg
• [PATCH 2/2] drivers/tty/serial: use correct type for dma_map/unmap
  • From: Wolfram Sang
• [PATCH 0/2] use correct type for dma_map/unmap
  • From: Wolfram Sang
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Peter Hurley
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• [PATCH] serial: altera_jtaguart: Fix putchar function passed to uart_console_write()
  • From: Tobias Klauser
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [ PATCH V9 0/2] serial/uart/8250: Introduce tunable RX trigger I/F
  • From: Greg Kroah-Hartman
• Re: tcflow(TCOON/TCOOFF) vs. received XON/XOFF characters
  • From: Peter Hurley
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Peter Hurley
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• Re: tcflow(TCOON/TCOOFF) vs. received XON/XOFF characters
  • From: Grant Edwards
• Re: tcflow(TCOON/TCOOFF) vs. received XON/XOFF characters
  • From: Peter Hurley
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• tcflow(TCOON/TCOOFF) vs. received XON/XOFF characters
  • From: Grant Edwards
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi
• [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• [PATCH 2/5] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior
• [PATCH v4] 8250-core based serial driver for OMAP
  • From: Sebastian Andrzej Siewior
• [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• [PATCH 3/5] tty: serial: 8250 core: allow to set ->throttle / ->unthrottle callbacks
  • From: Sebastian Andrzej Siewior
• [PATCH 1/5] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior
• [PATCH v2] tty: kgdb_nmi: Automatically manage tty enable
  • From: Daniel Thompson
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Sekhar Nori
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 3/6] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 1/6] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior
• [PATCH V9 1/2] Serial: allow port drivers to have a default attribute group
  • From: Yoshihiro YUNOMAE
• [PATCH V9 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Yoshihiro YUNOMAE
• [ PATCH V9 0/2] serial/uart/8250: Introduce tunable RX trigger I/F
  • From: Yoshihiro YUNOMAE
• Re: [PATCH] serial: altera_jtaguart: Adpot uart_console_write()
  • From: Daniel Thompson
• [PATCH] serial: altera_jtaguart: Adpot uart_console_write()
  • From: Tobias Klauser
• Re: [PATCH v4 3/6] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Lee Jones
• Re: [PATCH v4 5/6] serial: 8250_dw: Add support for deferred probing
  • From: Maxime Ripard
• Re: [PATCH v4 3/6] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Maxime Ripard
• Re: [PATCH v4 6/6] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
  • From: Maxime Ripard
• Re: [PATCH v4 2/6] clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 support
  • From: Maxime Ripard
• Re: [PATCH v4 1/6] clk: sunxi: sun6i-apb0-gates: use bitmaps for valid gate indicies
  • From: Maxime Ripard
• [PATCH v2] serial: 8250: introduce up_to_u8250p() helper
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250: introduce up_to_u8250p() macro
  • From: Jiri Slaby
• RE: [PATCH 2/2] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Jingchang Lu
• [PATCHv2 2/2] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Jingchang Lu
• [RESEND 1/2] dt-binding: fsl-lpuart: use exact SoC revision to document binding
  • From: Jingchang Lu
• [PATCHv2 0/2] tty: serial: fsl_lpuart: add 32-bit register support and dt-binding
  • From: Jingchang Lu
• Re: [PATCH] tty: kgdb_nmi: Convert kgdb_nmi_tty_enabled into a module parameter
  • From: Daniel Thompson
• Re: [PATCH] serial: 8250: introduce up_to_u8250p() macro
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250: introduce up_to_u8250p() macro
  • From: Jiri Slaby
• [PATCH] serial: 8250: introduce up_to_u8250p() macro
  • From: Andy Shevchenko
• [PATCH 3/3] serial: sh-sci: Add calculation recive margin for HSCIF
  • From: Nobuhiro Iwamatsu
• [PATCH 2/3] serial: sh-sci: Fix range check of bit-rate for HSCIF
  • From: Nobuhiro Iwamatsu
• [PATCH 1/3] serial: sh-sci: Updated calculation of bit error rate and bit rate
  • From: Nobuhiro Iwamatsu
• Re: Re: [PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Yoshihiro YUNOMAE
• Re: [PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Greg KH
• [GIT PULL] TTY/Serial fixes for 3.16-rc5
  • From: Greg KH
• Re: [PATCH] serial/arc: Fix warning with CONSOLE_POLL
  • From: Vineet Gupta
• Re: [PATCH v2 repost] serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0
  • From: Simon Horman
• Re: [PATCH 2/2] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Greg KH
• Re: [PATCH] serial/arc: Fix warning with CONSOLE_POLL
  • From: Greg KH
• Re: [PATCH] tty: kgdb_nmi: Convert kgdb_nmi_tty_enabled into a module parameter
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 repost] serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0
  • From: Greg Kroah-Hartman
• Re: [PATCH tty-next 21/22] serial: core: Remove superfluous ldisc flush from uart_close()
  • From: Peter Hurley
• [PATCH v2 trivial 4/6] serial: pch_uart: Update error message for dmaengine_prep_slave_sg() API
  • From: Geert Uytterhoeven
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Peter Hurley
• [PATCH v2 repost] serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0
  • From: Simon Horman
• [PATCH] serial/arc: Fix warning with CONSOLE_POLL
  • From: Vineet Gupta
• [PATCH] serial: altera: Adopt uart_console_write()
  • From: Daniel Thompson
• dw8250_set_termios() questions
  • From: Alex Elder
• [PATCH] tty: kgdb_nmi: Convert kgdb_nmi_tty_enabled into a module parameter
  • From: Daniel Thompson
• [PATCH] serial: efm32: correct namespacing of location property
  • From: Uwe Kleine-König
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• [PATCH 2/2] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Jingchang Lu
• [PATCH 0/2] tty: serial: fsl_lpuart: add 32-bit register support and dt-binding
  • From: Jingchang Lu
• [PATCH 1/2] dt-binding: fsl-lpuart: use exact SoC revision to document binding
  • From: Jingchang Lu
• Re: [PATCH v2] serial: 8250_dw: support high baudrates if possible
  • From: Alex Elder
• RE: [PATCH] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Jingchang Lu
• Re: [PATCH 0/2] fixes for empty tx buffer breakage
  • From: Greg KH
• Re: [PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/2] fixes for empty tx buffer breakage
  • From: David Miller
• Re: [PATCH 0/2] fixes for empty tx buffer breakage
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] serial: 8250_dw: support high baudrates if possible
  • From: Greg KH
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Greg KH
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: menon.nishanth@xxxxxxxxx
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Carlos Hernandez
• Re: [PATCH 5/6] tty: serial: 8250-core: add rs485 support
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 2/6] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 2/6] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: One Thousand Gnomes
• Re: [PATCH 5/6] tty: serial: 8250-core: add rs485 support
  • From: One Thousand Gnomes
• Re: [PATCH 1/6] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Olivier Galibert
• Re: [PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: One Thousand Gnomes
• Re: [PATCH v4 3/6] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Lee Jones
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Tony Lindgren
• Re: [PATCH 3/6] tty: serial: 8250 core: add runtime pm
  • From: Tony Lindgren
• Re: [PATCH v2 REBASED 00/10] Generic earlyconsole for ARC UART Driver
  • From: Greg Kroah-Hartman
• Re: [PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] tty: serial: msm_serial.c: Cleaning up uninitialized variables
  • From: Rickard Strandqvist
• Re: [PATCH 5/6] tty: serial: 8250-core: add rs485 support
  • From: Lennart Sorensen
• Re: [PATCH v2] tty: serial: msm_serial.c: Cleaning up uninitialized variables
  • From: Stephen Boyd
• [RFC v3] 8250-core based serial driver for OMAP
  • From: Sebastian Andrzej Siewior
• [PATCH 1/6] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior
• [no subject]
  • From: Sebastian Andrzej Siewior
• [PATCH 4/6] tty: serial: 8250-core: reorder serial8250_stop_rx() & serial8250_start_tx()
  • From: Sebastian Andrzej Siewior
• [PATCH 5/6] tty: serial: 8250-core: add rs485 support
  • From: Sebastian Andrzej Siewior
• [PATCH 2/6] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior
• [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• [PATCH 3/6] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [RFC PATCH 2/4] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior
• Re: [RFC PATCH 1/4] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Tony Lindgren
• Re: WCH CH-382 support: help with patching
  • From: Matwey V. Kornilov
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Peter Hurley
• Re: [PATCH v2] serial: core: Preserve termios c_cflag for console resume
  • From: One Thousand Gnomes
• Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: One Thousand Gnomes
• [PATCH v2] serial: core: Preserve termios c_cflag for console resume
  • From: Peter Hurley
• [PATCH v2] fix serial console resume-from-suspend
  • From: Peter Hurley
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Tony Lindgren
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Tony Lindgren
• [PATCH v4 6/6] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
  • From: Chen-Yu Tsai
• [PATCH v4 5/6] serial: 8250_dw: Add support for deferred probing
  • From: Chen-Yu Tsai
• [PATCH v4 4/6] serial: 8250_dw: Add optional reset control support
  • From: Chen-Yu Tsai
• [PATCH v4 3/6] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Chen-Yu Tsai
• [PATCH v4 2/6] clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 support
  • From: Chen-Yu Tsai
• [PATCH v4 1/6] clk: sunxi: sun6i-apb0-gates: use bitmaps for valid gate indicies
  • From: Chen-Yu Tsai
• [PATCH v4 0/6] ARM: sun8i: Support A23 PRCM clock and reset controllers
  • From: Chen-Yu Tsai
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Lennart Sorensen
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: Tomasz Figa
• Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: Daniel Drake
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: One Thousand Gnomes
• Re: [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: One Thousand Gnomes
• Re: [PATCH v2 15/20] pinctrl: sunxi: Add A23 R_PIO controller support
  • From: Linus Walleij
• Re: [RFC PATCH 2/4] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: One Thousand Gnomes
• Re: [RFC PATCH 1/4] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: One Thousand Gnomes
• Re: [PATCH v2 14/20] pinctrl: sunxi: Add A23 PIO controller support
  • From: Linus Walleij
• Re: [PATCH v3 8/9] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
  • From: Chen-Yu Tsai
• Re: [PATCH v3 9/9] ARM: sun8i: Add reset controller nodes to the DTSI
  • From: Maxime Ripard
• Re: [PATCH v3 7/9] ARM: sunxi: select MFD_SUN6I_PRCM when sun8i arch support is enabled
  • From: Maxime Ripard
• Re: [PATCH v3 8/9] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
  • From: Maxime Ripard
• Re: [PATCH v3 4/9] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Maxime Ripard
• Re: [PATCH v3 2/9] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
  • From: Maxime Ripard
• Re: [PATCH v3 1/9] clk: sunxi: Add A23 APB0 divider clock support
  • From: Maxime Ripard
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• [PATCH v2] serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0
  • From: Simon Horman
• [PATCH v2] tty: serial: msm_serial.c: Cleaning up uninitialized variables
  • From: Rickard Strandqvist
• [PATCH 1/2] serial: Test for no tx data on tx restart
  • From: Peter Hurley
• [PATCH 2/2] serial: arc_uart: Use uart_circ_empty() for open-coded comparison
  • From: Peter Hurley
• [PATCH 0/2] fixes for empty tx buffer breakage
  • From: Peter Hurley
• Re: [PATCH v2 REBASED 06/10] serial/arc: remove last remanants of platform data
  • From: Rob Herring
• [PATCH RESEND 2/2] serial: treewide: Remove empty implementations of enable_ms()
  • From: Alexander Shiyan
• [PATCH RESEND 1/2] serial: core: Make enable_ms() optional
  • From: Alexander Shiyan
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Lennart Sorensen
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Peter Maydell
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Robert Nelson
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 4/4] tty: serial: Add 8250-core based omap driver v2
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 1/4] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 2/4] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior
• [RFC PATCH 3/4] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v2 REBASED 00/10] Generic earlyconsole for ARC UART Driver
  • From: Vineet Gupta
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Lennart Sorensen
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Javier Martinez Canillas
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Reichel
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Reichel
• [PATCH v3 5/9] serial: 8250_dw: Add optional reset control support
  • From: Chen-Yu Tsai
• [PATCH v3 3/9] clk: sunxi: Add A23 specific compatible to sun6i-a31-apb0-gates-clk
  • From: Chen-Yu Tsai
• [PATCH v3 7/9] ARM: sunxi: select MFD_SUN6I_PRCM when sun8i arch support is enabled
  • From: Chen-Yu Tsai
• [PATCH v3 9/9] ARM: sun8i: Add reset controller nodes to the DTSI
  • From: Chen-Yu Tsai
• [PATCH v3 2/9] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
  • From: Chen-Yu Tsai
• [PATCH v3 8/9] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
  • From: Chen-Yu Tsai
• [PATCH v3 4/9] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Chen-Yu Tsai
• [PATCH v3 0/9] ARM: sun8i: Support A23 PRCM clock and reset controllers
  • From: Chen-Yu Tsai
• [PATCH v3 1/9] clk: sunxi: Add A23 APB0 divider clock support
  • From: Chen-Yu Tsai
• [PATCH v3 6/9] serial: 8250_dw: Add support for deferred probing
  • From: Chen-Yu Tsai
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Robert Nelson
• [PATCH] serial: sirf: transfer more bytes once to decrease interrupts
  • From: Barry Song
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Robert Nelson
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Aaro Koskinen
• Re: [PATCH 0/3] s/FOOTBRIDGE/ARCH_FOOTBRIDGE/
  • From: Russell King - ARM Linux
• Re: [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi
• [PATCH 2/2] serial: fsl_lpuart: calculate DMA burst
  • From: Stefan Agner
• [PATCH 1/2] serial: fsl_lpuart: move DMA RX timeout calculation
  • From: Stefan Agner
• [RFC PATCH] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH] serial: 8250_dw: add ability to handle the peripheral clock
  • From: Heiko Stübner
• Re: [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7778
  • From: Laurent Pinchart
• Re: [PATCH 0/3] s/FOOTBRIDGE/ARCH_FOOTBRIDGE/
  • From: Uwe Kleine-König
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7778
  • From: Simon Horman
• Re: [PATCH] serial: 8250_dw: support high baudrates if possible
  • From: Alex Elder
• Re: [PATCH 0/3] s/FOOTBRIDGE/ARCH_FOOTBRIDGE/
  • From: Russell King - ARM Linux
• Re: [PATCH] serial: 8250_dw: support high baudrates if possible
  • From: One Thousand Gnomes
• [PATCH 0/3] s/FOOTBRIDGE/ARCH_FOOTBRIDGE/
  • From: Uwe Kleine-König
• [PATCH 1/3] serial: DC21285: depend on ARCH_FOOTBRIDGE instead of FOOTBRIDGE
  • From: Uwe Kleine-König
• [PATCH v2] serial: 8250_dw: support high baudrates if possible
  • From: Alex Elder
• [PATCH] tty: serial: fsl_lpuart: add 32-bit register interface support
  • From: Jingchang Lu
• Re: [PATCH] serial: 8250_dw: support high baudrates if possible
  • From: Alex Elder
• Re: [PATCH] serial: 8250_dw: support high baudrates if possible
  • From: One Thousand Gnomes
• [PATCH] serial: 8250_dw: support high baudrates if possible
  • From: Alex Elder
• Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: Tomasz Figa
• Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: Russell King - ARM Linux
• [PATCH 3/3] ARM: dts: SAMSUNG: Add aliases of UART nodes
  • From: Tomasz Figa
• [PATCH 0/3] Deterministic UART numbering on Samsung SoCs
  • From: Tomasz Figa
• [PATCH 1/3] Documentation: devicetree: Update samsung UART bindings
  • From: Tomasz Figa
• [PATCH 2/3] serial: samsung: Consider DT alias when probing ports
  • From: Tomasz Figa
• [PATCH V2 1/2] serial: amba-pl011: Remove redundant label
  • From: Tushar Behera
• [PATCH V2 2/2] serial: amba-pl010: Use devres APIs
  • From: Tushar Behera
• [PATCH 0/2] serial: amba-pl01x: Clean up patches
  • From: Tushar Behera
• Re: [PATCH 2/2] serial: amba-pl010: Use devres APIs
  • From: Tushar Behera
• Re: [linux-sunxi] Re: [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk
  • From: maxime.ripard
• Re: [PATCH v2 REBASED 06/10] serial/arc: remove last remanants of platform data
  • From: Vineet Gupta
• Re: [PATCH v2 REBASED 00/10] Generic earlyconsole for ARC UART Driver
  • From: Rob Herring
• Re: [PATCH v2 REBASED 06/10] serial/arc: remove last remanants of platform data
  • From: Rob Herring
• [PATCH v2 REBASED 00/10] Generic earlyconsole for ARC UART Driver
  • From: Vineet Gupta
• [PATCH v2 REBASED 01/10] serial/arc: use uart_console_write() helper
  • From: Vineet Gupta
• [PATCH v2 REBASED 02/10] serial/arc: Refactor by referencing to uart_port where possible
  • From: Vineet Gupta
• [PATCH v2 REBASED 03/10] serial/arc: Remove the workaround for legacy ISS
  • From: Vineet Gupta
• [PATCH v2 REBASED 05/10] serial/arc: remove earlyprintk support and switch to earlycon
  • From: Vineet Gupta
• [PATCH v2 REBASED 06/10] serial/arc: remove last remanants of platform data
  • From: Vineet Gupta
• [PATCH v2 REBASED 07/10] serial/arc: inline the probe helper
  • From: Vineet Gupta
• [PATCH v2 REBASED 08/10] ARC: [arcfpga] RIP early uart platform device stuff
  • From: Vineet Gupta
• [PATCH v2 REBASED 09/10] serial/arc: Enable DT based earlycon
  • From: Vineet Gupta
• [PATCH v2 REBASED 10/10] ARC: [arcfpga] stdout-path now suffices for earlycon/console
  • From: Vineet Gupta
• [PATCH v2 REBASED 04/10] serial/arc: Use generic earlycon infrastructure
  • From: Vineet Gupta
• Re: [PATCH 2/2] serial: amba-pl010: Use devres APIs
  • From: Daniel Thompson
• Re: [PATCH 1/2] serial: amba-pl011: Remove redundant label
  • From: Daniel Thompson
• Re: [PATCH] serial: samsung: Remove redundant label
  • From: Sachin Kamat
• [PATCH] serial: samsung: Remove redundant label
  • From: Tushar Behera
• [PATCH 1/2] serial: amba-pl011: Remove redundant label
  • From: Tushar Behera
• [PATCH 2/2] serial: amba-pl010: Use devres APIs
  • From: Tushar Behera
• [PATCH 0/2] serial: amba-pl01x: Clean up patches
  • From: Tushar Behera
• Re: [PATCH v2 09/20] clk: sunxi: Add sun6i MBUS clock support
  • From: Chen-Yu Tsai
• [GIT PULL] TTY/Serial fixes for 3.16-rc2
  • From: Greg KH
• Re: [PATCH v2 16/20] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Chen-Yu Tsai
• Re: [linux-sunxi] Re: [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk
  • From: Chen-Yu Tsai
• Fwd: [linux-sunxi] Re: [PATCH v2 17/20] ARM: sunxi: Introduce Allwinner A23 support
  • From: Chen-Yu Tsai
• Re: [linux-sunxi] Re: [PATCH v2 17/20] ARM: sunxi: Introduce Allwinner A23 support
  • From: Chen-Yu Tsai
• Re: [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk
  • From: Maxime Ripard
• [RESEND PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Yoshihiro YUNOMAE
• [RESEND PATCH V8 1/2] serial/uart: Introduce device specific attribute group to uart_port structure
  • From: Yoshihiro YUNOMAE
• [RESEND PATCH V8 0/2] serial/uart/8250: Introduce tunable RX trigger I/F
  • From: Yoshihiro YUNOMAE
• Re: [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk
  • From: Chen-Yu Tsai
• Re: [PATCH v2 11/20] clk: sunxi: Add A23 clocks support
  • From: Chen-Yu Tsai
• Re: [PATCH v2 18/20] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i)
  • From: Maxime Ripard
• Re: [PATCH v2 17/20] ARM: sunxi: Introduce Allwinner A23 support
  • From: Maxime Ripard
• Re: [PATCH v2 16/20] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Maxime Ripard
• Re: [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk
  • From: Maxime Ripard
• Re: [PATCH v2 13/20] clk: sunxi: Add A23 specific compatible to sun6i-a31-apb0-gates-clk
  • From: Maxime Ripard
• Re: [PATCH v2 11/20] clk: sunxi: Add A23 clocks support
  • From: Maxime Ripard
• Re: [PATCH v2 10/20] clk: sunxi: Add support for table-based divider clocks
  • From: Maxime Ripard
• Re: [PATCH v2 09/20] clk: sunxi: Add sun6i MBUS clock support
  • From: Maxime Ripard
• Re: [PATCH v2 08/20] ARM: sun6i: DT: Rename PLL6 to PLL6x2 and add fixed-factor-clock for PLL6
  • From: Maxime Ripard
• Re: [PATCH v2 05/20] clk: sunxi: Support factor clocks with N multiplier factor starting from 1
  • From: Maxime Ripard
• Re: [PATCH v2 04/20] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
  • From: Maxime Ripard
• Re: [PATCH v2 03/20] clk: sunxi: move "ahb_sdram" to protected clock list
  • From: Maxime Ripard
• Re: [PATCH v2 01/20] serial: 8250_dw: Add optional reset control support
  • From: Maxime Ripard
• 9-bit mode
  • From: Matwey V. Kornilov
• Re: [PATCH v2 16/20] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Lee Jones
• Re: [PATCH v2 05/20] clk: sunxi: Support factor clocks with N multiplier factor starting from 1
  • From: Rob Herring
• Re: Broken serial port
  • From: Laurent Vivier
• Re: Broken serial port
  • From: Peter Hurley
• Broken serial port
  • From: Laurent Vivier
• [PATCH v2 00/20] ARM: sunxi: Introduce Allwinner A23 (sun8i) support
  • From: Chen-Yu Tsai
• [PATCH v2 14/20] pinctrl: sunxi: Add A23 PIO controller support
  • From: Chen-Yu Tsai
• [PATCH v2 02/20] clk: sunxi: register clock gates with clkdev
  • From: Chen-Yu Tsai
• [PATCH v2 16/20] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Chen-Yu Tsai
• [PATCH v2 08/20] ARM: sun6i: DT: Rename PLL6 to PLL6x2 and add fixed-factor-clock for PLL6
  • From: Chen-Yu Tsai
• [PATCH v2 17/20] ARM: sunxi: Introduce Allwinner A23 support
  • From: Chen-Yu Tsai
• [PATCH v2 20/20] ARM: sun8i: dt: Add Ippo-q8h v5 support
  • From: Chen-Yu Tsai
• [PATCH v2 09/20] clk: sunxi: Add sun6i MBUS clock support
  • From: Chen-Yu Tsai
• [PATCH v2 15/20] pinctrl: sunxi: Add A23 R_PIO controller support
  • From: Chen-Yu Tsai
• [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk
  • From: Chen-Yu Tsai
• [PATCH v2 06/20] clk: sunxi: Fix rate_recalc for sun6i PLL1
  • From: Chen-Yu Tsai
• [PATCH v2 11/20] clk: sunxi: Add A23 clocks support
  • From: Chen-Yu Tsai
• [PATCH v2 18/20] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i)
  • From: Chen-Yu Tsai
• [PATCH v2 07/20] clk: sunxi: Fix PLL6 calculation on sun6i
  • From: Chen-Yu Tsai
• [PATCH v2 03/20] clk: sunxi: move "ahb_sdram" to protected clock list
  • From: Chen-Yu Tsai
• [PATCH v2 10/20] clk: sunxi: Add support for table-based divider clocks
  • From: Chen-Yu Tsai
• [PATCH v2 19/20] ARM: sunxi: Add Allwinner A23 dtsi
  • From: Chen-Yu Tsai
• [PATCH v2 01/20] serial: 8250_dw: Add optional reset control support
  • From: Chen-Yu Tsai
• [PATCH v2 04/20] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
  • From: Chen-Yu Tsai
• [PATCH v2 05/20] clk: sunxi: Support factor clocks with N multiplier factor starting from 1
  • From: Chen-Yu Tsai
• [PATCH v2 13/20] clk: sunxi: Add A23 specific compatible to sun6i-a31-apb0-gates-clk
  • From: Chen-Yu Tsai
• Re: [PATCH 15/22] pinctrl: sunxi: Add A23 PIO controller support
  • From: Maxime Ripard
• Re: [PATCH tty-next 15/22] isdn: tty: Use private flag for ASYNC_CLOSING
  • From: One Thousand Gnomes
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: One Thousand Gnomes
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Peter Hurley
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Arnd Bergmann
• RE: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: David Laight
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Peter Hurley
• Re: [PATCH 15/22] pinctrl: sunxi: Add A23 PIO controller support
  • From: Chen-Yu Tsai
• RE: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: David Laight
• Re: [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Arnd Bergmann
• Re: [PATCH] serial: samsung: Fix compile error with SERIAL_SAMSUNG_DEBUG
  • From: Greg Kroah-Hartman
• Re: [PATCH tty-next 15/22] isdn: tty: Use private flag for ASYNC_CLOSING
  • From: Peter Hurley
• RE: [PATCH tty-next 15/22] isdn: tty: Use private flag for ASYNC_CLOSING
  • From: David Laight
• Re: [PATCH tty-next 07/22] tty: ipwireless: Remove tty->closing abort from ipw_open()
  • From: David Sterba
• Re: [PATCH tty-next 17/22] tty: Remove ASYNC_CLOSING
  • From: Jesper Nilsson
• Re: [PATCH tty-next 09/22] tty: Remove tty_hung_up_p() tests from tty drivers' open()
  • From: Jesper Nilsson
• [PATCH tty-next 15/22] isdn: tty: Use private flag for ASYNC_CLOSING
  • From: Peter Hurley
• [PATCH tty-next 19/22] serial: Style fix
  • From: Peter Hurley
• [PATCH tty-next 21/22] serial: core: Remove superfluous ldisc flush from uart_close()
  • From: Peter Hurley
• [PATCH tty-next 22/22] serial: Fix locking for uart driver set_termios() method
  • From: Peter Hurley
• [PATCH] serial: 8250_dw: add ability to handle the peripheral clock
  • From: Heiko Stübner
• [PATCH tty-next 20/22] serial: Refactor uart_flush_buffer() from uart_close()
  • From: Peter Hurley
• [PATCH tty-next 11/22] tty: Call hangup method in modern style
  • From: Peter Hurley
• [PATCH tty-next 12/22] tty: serial: Fix termios/port flags mismatch
  • From: Peter Hurley
• [PATCH tty-next 18/22] tty: Move tty hung up check from port->lock critical section
  • From: Peter Hurley
• [PATCH tty-next 10/22] char: synclink: Remove WARN_ON for bad port count
  • From: Peter Hurley
• [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()
  • From: Peter Hurley
• [PATCH tty-next 16/22] tty: mxser: Use tty->closing for ASYNC_CLOSING
  • From: Peter Hurley
• [PATCH tty-next 17/22] tty: Remove ASYNC_CLOSING
  • From: Peter Hurley
• [PATCH tty-next 13/22] serial: blackfin: Fix CTS flow control
  • From: Peter Hurley
• [PATCH tty-next 01/22] tty: Document locking for tty driver methods
  • From: Peter Hurley
• [PATCH tty-next 04/22] tty: Document locking for tty_port_block_til_ready()
  • From: Peter Hurley
• [PATCH tty-next 03/22] tty: Document locking for tty_port_open()
  • From: Peter Hurley
• [PATCH tty-next 02/22] tty: Document locking for tty_port_close{,start,end}()
  • From: Peter Hurley
• [PATCH tty-next 06/22] tty: Move tty->closing from port lock critical section
  • From: Peter Hurley
• [PATCH tty-next 05/22] tty: Document locking for tty_port_hangup()
  • From: Peter Hurley
• [PATCH tty-next 08/22] serial: Use UPF_* constants with struct uart_port flags
  • From: Peter Hurley
• [PATCH tty-next 07/22] tty: ipwireless: Remove tty->closing abort from ipw_open()
  • From: Peter Hurley
• [PATCH tty-next 09/22] tty: Remove tty_hung_up_p() tests from tty drivers' open()
  • From: Peter Hurley
• [PATCH tty-next 00/22] tty/serial fixes for 3.17
  • From: Peter Hurley
• [PATCH tty-next 1/2] serial: Fix IGNBRK handling
  • From: Peter Hurley
• [PATCH tty-next 2/2] tty: Correct INPCK handling
  • From: Peter Hurley
• [PATCH RESEND] tty: serial: men_z135_uart: Wakeup UART after transmitting
  • From: Johannes Thumshirn
• Re: [PATCH] serial: samsung: Fix compile error with SERIAL_SAMSUNG_DEBUG
  • From: Joe Perches
• Re: [PATCH] serial: samsung: Fix compile error with SERIAL_SAMSUNG_DEBUG
  • From: Sachin Kamat
• Re: [PATCH] serial: samsung: Fix compile error with SERIAL_SAMSUNG_DEBUG
  • From: Joe Perches
• [PATCH] serial: samsung: Fix compile error with SERIAL_SAMSUNG_DEBUG
  • From: Christian Engelmayer
• Re: [PATCH] tty: serial: men_z135_uart: Wakeup UART after transmitting
  • From: Greg Kroah-Hartman
• Re: [PATCH 9/9] serial/arc: Add DT based earlycon support
  • From: Vineet Gupta
• Re: [PATCH] serial: 8250_dma: sync regions for device before transfer
  • From: Heikki Krogerus
• Re: [PATCH] tty: serial: men_z135_uart: Wakeup UART after transmitting
  • From: Johannes Thumshirn
• [PATCH] tty: serial: men_z135_uart: Wakeup UART after transmitting
  • From: Johannes Thumshirn
• Re: [PATCH 9/9] serial/arc: Add DT based earlycon support
  • From: Rob Herring
• [PATCH] tty/serial: fix 8250 early console option passing to regular console
  • From: Rob Herring
• [PATCH] serial: 8250_dma: sync regions for device before transfer
  • From: Andy Shevchenko
• [PATCH 7/9] serial/arc: inline the probe helper
  • From: Vineet Gupta
• [PATCH 3/9] serial/arc: Remove the workaround for legacy ISS
  • From: Vineet Gupta
• [PATCH 4/9] serial/arc: Use generic earlycon infrastructure
  • From: Vineet Gupta
• [PATCH 1/9] serial/arc: use uart_console_write() helper
  • From: Vineet Gupta
• [PATCH 5/9] serial/arc: remove earlyprintk support and switch to earlycon
  • From: Vineet Gupta
• [PATCH 8/9] ARC: [arcfpga] RIP early uart platform device stuff
  • From: Vineet Gupta
• [PATCH 9/9] serial/arc: Add DT based earlycon support
  • From: Vineet Gupta
• [PATCH 6/9] serial/arc: remove last remanants of platform data
  • From: Vineet Gupta
• [PATCH 2/9] serial/arc: Refactor by referencing to uart_port where possible
  • From: Vineet Gupta
• [PATCH 0/9] Generic earlyconsole for ARC UART Driver
  • From: Vineet Gupta
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Yinghai Lu
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Tony Luck
• Re: [PATCH v2] serial: uart: add hw flow control support configuration
  • From: Dann Frazier
• Re: [PATCH v2] serial: uart: add hw flow control support configuration
  • From: Murali Karicheri
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Rob Herring
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Rob Herring
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Tony Luck
• Re: [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: Peter Hurley
• Re: [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: One Thousand Gnomes
• Re: [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: Peter Hurley
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Rob Herring
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Rob Herring
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Tony Luck
• Re: [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon
  • From: Tony Luck
• [patch] serial: txx9: remove duplicate TXX9_SIFCR_TDIL_MASK define
  • From: Dan Carpenter
• Re: [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: One Thousand Gnomes
• Arm Target System hangs on uart_open/uart_write
  • From: Abhijit Lamsoge
• [PATCH] serial: 8250_dw: use UPF_* constants when define flags
  • From: Andy Shevchenko
• [PATCH 2/2] serial: tegra: ack the rx dma desc after transfer terminated
  • From: Laxman Dewangan
• [PATCH 1/2] serial: tegra: update tx_circular buffer only when TX_DMA is in progress
  • From: Laxman Dewangan
• [PATCH] serial: lpc32xx uart module can't do console
  • From: Arnd Bergmann
• [PATCH 1/2] serial: pxa: fix build with !SERIAL_PXA_CONSOLE
  • From: Arnd Bergmann
• [PATCH] serial: 8250_dw: clock rate handling for all ACPI platforms
  • From: Heikki Krogerus
• Re: [PATCH 2/2] serial: core: Preserve termios c_cflag for console resume
  • From: Valerio Vanni
• Re: [PATCH] serial: samsung: fix typo in debug code
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: samsung: fix typo in debug code
  • From: Joe Perches
• Re: [PATCH] serial: samsung: Use %pa to print 'resource_size_t' type
  • From: Jingoo Han
• Re: [PATCH 2/2] serial: core: Preserve termios c_cflag for console resume
  • From: Valerio Vanni
• [PATCH] serial: samsung: Use %pa to print 'resource_size_t' type
  • From: Fabio Estevam
• [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: Peter Hurley
• [PATCH 2/2] serial: core: Preserve termios c_cflag for console resume
  • From: Peter Hurley
• Re: [PATCH 2/2] serial: core: Preserve termios c_cflag for console resume
  • From: Peter Hurley
• Re: [PATCH 2/2] serial: core: Preserve termios c_cflag for console resume
  • From: Peter Hurley
• Re: [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: Peter Hurley
• Re: [PATCH 2/2] serial: core: Preserve termios c_cflag for console resume
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] serial: core: Don't drop DTR if system console
  • From: Greg Kroah-Hartman
• [PATCH 2/2] serial: treewide: Remove empty implementations of enable_ms()
  • From: Alexander Shiyan
• [PATCH 1/2] serial: core: Make enable_ms() optional
  • From: Alexander Shiyan
• Re: [PATCH] serial: samsung: fix typo in debug code
  • From: Sachin Kamat
• [PATCH] serial: samsung: fix typo in debug code
  • From: Arnd Bergmann
• [PATCH 1/1] serial: samsung: Fix build error
  • From: Sachin Kamat
• RE: [PATCH 1/4] serial: imx: implement the flush_buffer hook
  • From: Wang, Jiada (ESD)
• [GIT PULL] TTY/Serial patches for 3.16-rc1
  • From: Greg KH
• Re: [PATCH] tty: serial: msm_serial.c: Cleaning up uninitialized variables
  • From: dwalker
• Re: [PATCH] tty: serial: msm_serial.c: Cleaning up uninitialized variables
  • From: Daniel Thompson
• [PATCH] tty: serial: msm_serial.c: Cleaning up uninitialized variables
  • From: Rickard Strandqvist
• Re: [PATCH 1/2] serial: imx: remove the DMA wait queue
  • From: Huang Shijie
• Re: [PATCH tty-next] serial: sirf: Fix compilation failure
  • From: Barry Song
• Re: serial console does not wake from S3 suspend
  • From: Valerio Vanni
• RE: [PATCH 1/2] serial: imx: remove the DMA wait queue
  • From: Wang, Jiada (ESD)
• Re: [PATCH 2/2] serial: imx: disable the receiver ready interrupt for imx_stop_rx
  • From: Huang Shijie
• [PATCH V8 2/2] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Yoshihiro YUNOMAE
• [PATCH V8 1/2] serial/uart: Introduce device specific attribute group to uart_port structure
  • From: Yoshihiro YUNOMAE
• [PATCH V8 0/2] serial/uart/8250: Introduce tunable RX trigger I/F
  • From: Yoshihiro YUNOMAE
• Re: [PATCH 2/2] serial: imx: disable the receiver ready interrupt for imx_stop_rx
  • From: Dirk Behme
• Re: [PATCH 17/22] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Maxime Ripard
• Re: [PATCH tty-next] serial: sirf: Fix compilation failure
  • From: Greg Kroah-Hartman
• Re: [PATCH tty-next] serial: sirf: Fix compilation failure
  • From: Barry Song
• [PATCH tty-next] serial: sirf: Fix compilation failure
  • From: Daniel Thompson
• [PATCH v6] serial: sirf: Fix compilation failure
  • From: Daniel Thompson
• Re: Serial Core crash in tty_open
  • From: Abhijit Lamsoge
• [PATCH tty-next v2 1/4] serial: cpm_uart: No LF conversion in put_poll_char()
  • From: Daniel Thompson
• [PATCH tty-next v2 0/4] serial: kgdb_nmi: Allow ttyNMIX to act as primary console
  • From: Daniel Thompson
• [PATCH tty-next v2 3/4] serial: kgdb_nmi: Switch from tasklets to real timers
  • From: Daniel Thompson
• [PATCH tty-next v2 4/4] serial: kgdb_nmi: Improve console integration with KDB I/O
  • From: Daniel Thompson
• [PATCH tty-next v2 2/4] serial: kgdb_nmi: Use container_of() to locate private data
  • From: Daniel Thompson
• Re: UART_IIR_BUSY set for 16550A
  • From: Theodore Ts'o
• Re: [PATCH 0/5] serial: imx: fixes
  • From: Huang Shijie
• Re: Re: [PATCH V7] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Yoshihiro YUNOMAE
• Re: [PATCH 0/5] serial: imx: fixes
  • From: Dirk Behme
• Re: [PATCH 17/22] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Chen-Yu Tsai
• Re: [PATCH V7] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] serial: uart: add hw flow control support configuration
  • From: Dann Frazier
• Re: [PATCH 1/4] serial: core: Consistent LF handling for poll_put_char
  • From: Greg Kroah-Hartman
• Re: [PATCH RESEND 3/5] tty/serial: Add GPIOLIB helpers for controlling modem lines
  • From: Greg Kroah-Hartman
• Re: [PATCH RESEND 3/5] tty/serial: Add GPIOLIB helpers for controlling modem lines
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: Add support for Advantech PCM-3614I/PCM-3618I serial expansion cards
  • From: Greg KH
• Re: [PATCH 0/5] serial: imx: fixes
  • From: Greg KH
• Re: [PATCH] serial: samsung: Neaten dbg uses
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: samsung: Neaten dbg uses
  • From: Greg Kroah-Hartman
• Re: Serial Core crash in tty_open
  • From: Greg KH
• Re: Serial Core crash in tty_open
  • From: Greg KH
• Re: Serial Core crash in tty_open
  • From: Abhijit Lamsoge
• Serial Core crash in tty_open
  • From: Abhijit Lamsoge
• Re: UART_IIR_BUSY set for 16550A
  • From: Prasad Koya
• Re: UART_IIR_BUSY set for 16550A
  • From: Theodore Ts'o
• Re: UART_IIR_BUSY set for 16550A
  • From: Prasad Koya
• Re: [PATCH 03/22] clk: sunxi: add "pll6" to sun6i protected clock list
  • From: Maxime Ripard
• Re: [PATCH 19/22] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i)
  • From: Maxime Ripard
• Re: [PATCH 17/22] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Maxime Ripard
• Re: [PATCH 22/22] ARM: sun8i: dt: Add Ippo-q8h v5 support
  • From: Maxime Ripard
• Re: [PATCH 20/22] ARM: sun8i: Add SMP support for the Allwinner A23
  • From: Marc Zyngier
• [PATCH V7] serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
  • From: Yoshihiro YUNOMAE
• [PATCH] serial: sirf: fix spinlock deadlock issue
  • From: Barry Song
• Re: [PATCH 04/22] clk: sunxi: move "ahb_sdram" to protected clock list
  • From: Chen-Yu Tsai
• Re: [PATCH 19/22] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i)
  • From: Chen-Yu Tsai
• Re: [PATCH 03/22] clk: sunxi: add "pll6" to sun6i protected clock list
  • From: Chen-Yu Tsai
• Re: [PATCH 17/22] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
  • From: Chen-Yu Tsai