Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
---
drivers/tty/serial/arc_uart.c | 90 +++++++++++++++++++------------------------
1 file changed, 40 insertions(+), 50 deletions(-)
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index dc3d5db37dc4..435de4f2af3b 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -496,50 +496,6 @@ static struct uart_ops arc_serial_pops = {
#endif
};
-static int
-arc_uart_init_one(struct platform_device *pdev, int dev_id)
-{
- struct device_node *np = pdev->dev.of_node;
- struct arc_uart_port *uart = &arc_uart_ports[dev_id];
- struct uart_port *port = &uart->port;
- u32 val;
-
- if (of_property_read_u32(np, "clock-frequency", &val)) {
- dev_err(&pdev->dev, "clock-frequency property NOTset\n");
- return -EINVAL;
- }
- port->uartclk = val;
-
- if (of_property_read_u32(np, "current-speed", &val)) {
- dev_err(&pdev->dev, "current-speed property NOT set\n");
- return -EINVAL;
- }
- uart->baud = val;
-
- port->membase = of_iomap(np, 0);
- if (!port->membase)
- /* No point of dev_err since UART itself is hosed here */
- return -ENXIO;
-
- port->irq = irq_of_parse_and_map(np, 0);
-
- port->dev = &pdev->dev;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
- port->line = dev_id;
- port->ops = &arc_serial_pops;
-
- port->fifosize = ARC_UART_TX_FIFO_SIZE;
-
- /*
- * uart_insert_char( ) uses it in decideding whether to ignore a
- * char or not. Explicitly setting it here, removes the subtelty
- */
- port->ignore_status_mask = 0;
-
- return 0;
-}
-
#ifdef CONFIG_SERIAL_ARC_CONSOLE
static int arc_serial_console_setup(struct console *co, char *options)
@@ -628,8 +584,11 @@ EARLYCON_DECLARE(arc_uart, arc_early_console_setup);
static int arc_serial_probe(struct platform_device *pdev)
{
- int rc, dev_id;
struct device_node *np = pdev->dev.of_node;
+ struct arc_uart_port *uart;
+ struct uart_port *port;
+ int dev_id;
+ u32 val;
/* no device tree device */
if (!np)
@@ -639,12 +598,43 @@ static int arc_serial_probe(struct platform_device *pdev)
if (dev_id < 0)
dev_id = 0;
- rc = arc_uart_init_one(pdev, dev_id);
- if (rc)
- return rc;
+ uart = &arc_uart_ports[dev_id];
+ port = &uart->port;
+
+ if (of_property_read_u32(np, "clock-frequency", &val)) {
+ dev_err(&pdev->dev, "clock-frequency property NOTset\n");
+ return -EINVAL;
+ }
+ port->uartclk = val;
+
+ if (of_property_read_u32(np, "current-speed", &val)) {
+ dev_err(&pdev->dev, "current-speed property NOT set\n");
+ return -EINVAL;
+ }
+ uart->baud = val;
+
+ port->membase = of_iomap(np, 0);
+ if (!port->membase)
+ /* No point of dev_err since UART itself is hosed here */
+ return -ENXIO;
+
+ port->irq = irq_of_parse_and_map(np, 0);
+
+ port->dev = &pdev->dev;
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->line = dev_id;
+ port->ops = &arc_serial_pops;
+
+ port->fifosize = ARC_UART_TX_FIFO_SIZE;
+
+ /*
+ * uart_insert_char( ) uses it in decideding whether to ignore a
+ * char or not. Explicitly setting it here, removes the subtelty
+ */
+ port->ignore_status_mask = 0;
- rc = uart_add_one_port(&arc_uart_driver, &arc_uart_ports[dev_id].port);
- return rc;
+ return uart_add_one_port(&arc_uart_driver, &arc_uart_ports[dev_id].port);
}
static int arc_serial_remove(struct platform_device *pdev)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
