When a tty is opened for the serial console, the termios c_cflag settings are inherited from the console line settings. However, if the tty is subsequently closed, the termios settings are lost. This results in a garbled console if the console is later suspended and resumed. Preserve the termios c_cflag for the serial console when the tty is shutdown; this reflects the most recent line settings. Fixes: Bugzilla #69751, 'serial console does not wake from S3' Reported-by: Valerio Vanni <valerio.vanni@xxxxxxxxx> Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/serial_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 498b149..a67861c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -239,6 +239,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ + if (uart_console(uport) && tty) + uport->cons->cflag = tty->termios.c_cflag; + if (!uart_console(uport) && (!tty || (tty->termios.c_cflag & HUPCL))) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
