If the chosen baud rate is large enough (e.g. 3.5 megabaud), the
calculated n13 and n16 values in serial_omap_baud_is_mode16 may become
0. This causes a division by zero when calculating the difference
between calculated and desired baud rates. To prevent this, cap n13 and
n16 on 1.
Signed-off-by: Frans Klaver <frans.klaver@xxxxxxxxx>
---
drivers/tty/serial/omap-serial.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d017cec..e454b7c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -254,8 +254,16 @@ serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud)
{
unsigned int n13 = port->uartclk / (13 * baud);
unsigned int n16 = port->uartclk / (16 * baud);
- int baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
- int baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
+ int baudAbsDiff13;
+ int baudAbsDiff16;
+
+ if (n13 == 0)
+ n13 = 1;
+ if (n16 == 0)
+ n16 = 1;
+
+ baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
+ baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
if (baudAbsDiff13 < 0)
baudAbsDiff13 = -baudAbsDiff13;
if (baudAbsDiff16 < 0)
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
