Hi All,
I've ported my driver to Linux Kernel 3.8.13.
Earlier it was working fine for 3.5.x Kernels.
I register a uart device file for data transfer like "/dev/xyz"
All the tty_ops for this UART driver are initialized to my own tty
uart_open/read/write/close functions.
Which are respectively called, when a sys_open comes on the above device file.
However,
the captured dmesg from "cat /proc/kmsg" shows all the correct prints
from the driver, and data is also transferred.
But the system "HANGS" giving the following message.
---------------------------------------------XX------------------------------------------------------------------------
181.350280] WARNING: at kernel/workqueue.c:1300 __queue_work+0x2c8/0x36c()
<4>[ 181.353851] Modules linked in:
<4>[ 181.355468] [<c001b3d0>] (unwind_backtrace+0x0/0xf0) from
[<c0042830>] (warn_slowpath_common+0x4c/0x64)
<4>[ 181.360412] [<c0042830>] (warn_slowpath_common+0x4c/0x64) from
[<c0042864>] (warn_slowpath_null+0x1c/0x24)
<4>[ 181.365447] [<c0042864>] (warn_slowpath_null+0x1c/0x24) from
[<c00587ac>] (__queue_work+0x2c8/0x36c)
<4>[ 181.370178] [<c00587ac>] (__queue_work+0x2c8/0x36c) from
[<c00588b0>] (queue_work_on+0x40/0x4c)
<4>[ 181.374694] [<c00588b0>] (queue_work_on+0x40/0x4c) from
[<c025a5e8>] (n_tty_open+0xa4/0x124)
<4>[ 181.379028] [<c025a5e8>] (n_tty_open+0xa4/0x124) from
[<c025c8d8>] (tty_ldisc_open+0x50/0x74)
<4>[ 181.383453] [<c025c8d8>] (tty_ldisc_open+0x50/0x74) from
[<c025d02c>] (tty_ldisc_setup+0x18/0x68)
<4>[ 181.388092] [<c025d02c>] (tty_ldisc_setup+0x18/0x68) from
[<c02567bc>] (tty_init_dev+0xe0/0x17c)
<4>[ 181.392639] [<c02567bc>] (tty_init_dev+0xe0/0x17c) from
[<c0256fe0>] (tty_open+0x2b0/0x518)
<4>[ 181.396942] [<c0256fe0>] (tty_open+0x2b0/0x518) from
[<c00d45b0>] (chrdev_open+0x100/0x17c)
<4>[ 181.401245] [<c00d45b0>] (chrdev_open+0x100/0x17c) from
[<c00cee7c>] (do_dentry_open+0x1d4/0x284)
<4>[ 181.405853] [<c00cee7c>] (do_dentry_open+0x1d4/0x284) from
[<c00cef64>] (finish_open+0x38/0x4c)
<4>[ 181.410400] [<c00cef64>] (finish_open+0x38/0x4c) from
[<c00dd1f0>] (do_last.isra.19+0x974/0xb98)
<4>[ 181.414916] [<c00dd1f0>] (do_last.isra.19+0x974/0xb98) from
[<c00dd4bc>] (path_openat+0xa8/0x47c)
<4>[ 181.419464] [<c00dd4bc>] (path_openat+0xa8/0x47c) from
[<c00ddb4c>] (do_filp_open+0x2c/0x78)
<4>[ 181.423797] [<c00ddb4c>] (do_filp_open+0x2c/0x78) from
[<c00cffd4>] (do_sys_open+0xe4/0x174)
<4>[ 181.428131] [<c00cffd4>] (do_sys_open+0xe4/0x174) from
[<c0013e00>] (ret_fast_syscall+0x0/0x30)
<4>[ 181.432586] ---[ end trace d39416ed62ef112f ]---
------------------More stuff------------------------------
[ 218.371063] INFO: rcu_preempt detected stalls on CPUs/tasks: { 0}
(detected by 1, t=2690 jiffies, g=1881, c=1880, q=87)
[ 218.376617] Backtrace for cpu 1 (current):
[ 218.378753] [<c001b3d0>] (unwind_backtrace+0x0/0xf0) from
[<c0019304>] (smp_send_all_cpu_backtrace+0x58/0xcc)
[ 218.383850] [<c0019304>] (smp_send_all_cpu_backtrace+0x58/0xcc)
from [<c0094fac>] (rcu_check_callbacks+0x574/0x730)
[ 218.389190] [<c0094fac>] (rcu_check_callbacks+0x574/0x730) from
[<c004f12c>] (update_process_times+0x3c/0x6c)
[ 218.394287] [<c004f12c>] (update_process_times+0x3c/0x6c) from
[<c007eabc>] (tick_sched_timer+0x58/0x8c)
[ 218.399139] [<c007eabc>] (tick_sched_timer+0x58/0x8c) from
[<c00620c8>] (__run_hrtimer.isra.16+0x50/0xd0)
[ 218.404052] [<c00620c8>] (__run_hrtimer.isra.16+0x50/0xd0) from
[<c0062a68>] (hrtimer_interrupt+0x140/0x2a0)
[ 218.409088] [<c0062a68>] (hrtimer_interrupt+0x140/0x2a0) from
[<c0019e34>] (arch_timer_handler_phys+0x2c/0x3c)
[ 218.414215] [<c0019e34>] (arch_timer_handler_phys+0x2c/0x3c) from
[<c008f984>] (handle_percpu_devid_irq+0x80/0xa0)
[ 218.419525] [<c008f984>] (handle_percpu_devid_irq+0x80/0xa0) from
[<c008c448>] (generic_handle_irq+0x20/0x30)
[ 218.424621] [<c008c448>] (generic_handle_irq+0x20/0x30) from
[<c0014d5c>] (handle_IRQ+0x7c/0xac)
[ 218.429138] [<c0014d5c>] (handle_IRQ+0x7c/0xac) from [<c000849c>]
(gic_handle_irq+0x3c/0x5c)
[ 218.433441] [<c000849c>] (gic_handle_irq+0x3c/0x5c) from
[<c0013980>] (__irq_svc+0x40/0x74)
[ 218.437744] Exception stack(0xeab87dd0 to 0xeab87e18)
[ 218.440338] 7dc0: 00000002
00000002 00000000 00000001
[ 218.444519] 7de0: eab87e3c c1395b80 c1395b80 c1395b88 00c8f000
00000001 00000000 00000000
[ 218.448699] 7e00: 00000001 eab87e18 c0025458 c0082e68 20000113 ffffffff
[ 218.452117] [<c0013980>] (__irq_svc+0x40/0x74) from [<c0082e68>]
(generic_exec_single+0x7c/0x94)
[ 218.456634] [<c0082e68>] (generic_exec_single+0x7c/0x94) from
[<c0082fd4>] (smp_call_function_single+0x154/0x1d8)
[ 218.461883] [<c0082fd4>] (smp_call_function_single+0x154/0x1d8)
from [<c0083480>] (smp_call_function+0x34/0x64)
[ 218.467041] [<c0083480>] (smp_call_function+0x34/0x64) from
[<c0019ba4>] (flush_tlb_kernel_range+0x50/0x60)
[ 218.472045] [<c0019ba4>] (flush_tlb_kernel_range+0x50/0x60) from
[<c0393f9c>] (binder_deferred_func+0x4ac/0x5f8)
[ 218.477294] [<c0393f9c>] (binder_deferred_func+0x4ac/0x5f8) from
[<c00577f8>] (process_one_work+0x260/0x408)
[ 218.482330] [<c00577f8>] (process_one_work+0x260/0x408) from
[<c0058050>] (worker_thread+0x2c8/0x428)
[ 218.487060] [<c0058050>] (worker_thread+0x2c8/0x428) from
[<c005e418>] (kthread+0xa0/0xac)
[ 218.491302] [<c005e418>] (kthread+0xa0/0xac) from [<c0013e98>]
(ret_from_fork+0x14/0x3c)
[ 218.495452]
[ 218.495452] sending IPI to all other CPUs:
----------------------Ends here-------------------------------
I am not sure, whether it's a problem of hardware, as when the kthread
schedules the work on CPU #1 for ARM.
There is no "unable to handle" message.
I am not am expert on how kernel internally handles workqueues and
schedules/puts them on the processor.
Any pointers in this regard are welcome.
-- Abhijit
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
