Re: fsl_lpuart/VF610: Division by zero.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25 Jul 2014, bpringlemeir@xxxxxxxxx wrote:

> I have this 'dmesg' with ttyLP1,
>
> Division by zero in kernel.  CPU: 0 PID: 187 Comm: getty Not tainted
> 3.15.0-rc8-04600-ge74a685-dirty #465 [<80013b18>] (unwind_backtrace)
> from [<80011e3c>] (show_stack+0x10/0x14) [<80011e3c>] (show_stack)
> from [<8019a11c>] (Ldiv0+0x8/0x10) [<8019a11c>] (Ldiv0) from
> [<801f0ad4>] (lpuart_startup+0x1e4/0x398) [<801f0ad4>]
> (lpuart_startup) from [<801ef2e8>] (uart_startup.part.18+0x84/0x1e8)
> [<801ef2e8>] (uart_startup.part.18) from [<801efd40>]
> (uart_open+0xe4/0x14c) [<801efd40>] (uart_open) from [<801d586c>]
> (tty_open+0x1a0/0x5d0) [<801d586c>] (tty_open) from [<800a1008>]
> (chrdev_open+0x9c/0x160) [<800a1008>] (chrdev_open) from [<8009bd0c>]
> (do_dentry_open.isra.15+0x1b4/0x270) [<8009bd0c>]
> (do_dentry_open.isra.15) from [<8009be98>] (finish_open+0x20/0x3c)
> [<8009be98>] (finish_open) from [<800a8bfc>]
> (do_last.isra.66+0x404/0xc60) [<800a8bfc>] (do_last.isra.66) from
> [<800a950c>] (path_openat+0xb4/0x5b0) [<800a950c>] (path_openat) from
> [<800aa900>] (do_filp_open+0x2c/0x80) [<800aa900>] (do_filp_open) from
> [<8009ce50>] (do_sys_open+0x120/0x1e0) [<8009ce50>] (do_sys_open) from
> [<8000ed80>] (ret_fast_syscall+0x0/0x30) random: nonblocking pool is
> initialized
>
> I looked at the vmlinux objdump and it is here,
>
> static int lpuart_dma_rx_request(struct uart_port *port)
> {
> ...
> 	sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) *
> 				FSL_UART_RX_DMA_BUFFER_SIZE * 3 /
> 				sport->rxfifo_size / 2;
>
> The variable 'sport->rxfifo_size' is set in lpuart_setup_watermark()
> and this is called after lpuart_dma_rx_request() in lpuart_startup().
>
> It looks the same in the 'tty/serial' tree?
>
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/tree/drivers/tty/serial/fsl_lpuart.c#n768
>
> I tried some simple changes but then I get no serial output, so I
> thought it might be better to see if I am using the wrong git trees or
> if the fix is more obvious to someone familiar with the code.
>
> I think that normally everyone runs the console on this port and
> 'lpuart_console_setup()' is setting 'sport->rxfifo_size' before hand?
> Or I don't understand why no one else is seeing this?

I failed to add,

   &uart1 {
           pinctrl-names = "default";
           pinctrl-0 = <&pinctrl_uart1>;
           status = "okay";
   };

to my device tree and then this condition triggered.  I can see the
'dmesg' by telneting to the device.  So maybe it is not so interesting.

If I put the proper initialization as above, then it is fine.

Thanks,
Bill Pringlemeir.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux