A few of the clock modules have odd dividers, such as
the 2 lowest dividers being the same (2), or have the
same divider when the highest bit is set.
This patch adds support for optional divider tables,
so the clock framework will know about the odd values.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
drivers/clk/sunxi/clk-sunxi.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index a086b5b..7e2f015 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -703,6 +703,7 @@ struct div_data {
u8 shift;
u8 pow;
u8 width;
+ const struct clk_div_table *table;
};
static const struct div_data sun4i_axi_data __initconst = {
@@ -743,10 +744,10 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
of_property_read_string(node, "clock-output-names", &clk_name);
- clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
- reg, data->shift, data->width,
- data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
- &clk_lock);
+ clk = clk_register_divider_table(NULL, clk_name, clk_parent, 0,
+ reg, data->shift, data->width,
+ data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+ data->table, &clk_lock);
if (clk) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
clk_register_clkdev(clk, clk_name, NULL);
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
