* Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> [140709 10:52]: > > v1…v2: > - added runtime PM. Could somebody could plese double check > this? I seems to be enabled and nothing explodes. However > serial_omap_get_context_loss_count() & enable_wakeup() are > NULL pointer (in the omap-serial driver). So I am not sure how > this supposed to work :) > - added omap_8250_set_termios() You can test this pretty easily on beagleboard xm for example using v3.16-r4: 1. Compile the kernel using omap2plus_defconfig and enable your driver. USB EHCI needs to be disabled and OTG port should not have a USB cable connected. 2. Boot with init=/bin/sh to keep user space timers to minimum at least until you have verified to hit off-idle 3. Enable UART timeouts with something like this. You may need to update it for ttyS, I just changed ttyO to ttyS here: #!/bin/bash uarts=$(find /sys/class/tty/ttyS*/device/power/ -type d) for uart in $uarts; do echo 3000 > $uart/autosuspend_delay_ms done uarts=$(find /sys/class/tty/ttyS*/power/ -type d) for uart in $uarts; do echo enabled > $uart/wakeup echo auto > $uart/control done echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode 4. Wait for UART to time out and verify you hit off-idle by looking at the debugfs entry: # cat /sys/kernel/debug/pm_debug/count ... core_pwrdm (ON),OFF:6,RET:0,INA:0,ON:7,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0 ... I just tried testing this, but did not get far on my omap3 evm: [ 5.445953] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfb020000 [ 5.453674] Internal error: : 1028 [#1] SMP ARM [ 5.458221] Modules linked in: [ 5.461334] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc4-00006-gaab2c6a #98 [ 5.469024] task: ce058b00 ti: ce05a000 task.ti: ce05a000 [ 5.474456] PC is at mem32_serial_in+0xc/0x1c [ 5.478851] LR is at serial8250_do_startup+0xc8/0x89c [ 5.483917] pc : [<c0346f90>] lr : [<c034ab2c>] psr: 60000113 [ 5.483917] sp : ce05bd10 ip : c0a0aba8 fp : ce275400 [ 5.495452] r10: 00000000 r9 : cda7a680 r8 : ce27568c [ 5.500701] r7 : ce275400 r6 : 00000000 r5 : ce280408 r4 : c10b6234 [ 5.507263] r3 : fb020000 r2 : 00000002 r1 : fb020000 r0 : c10b6234 [ 5.513854] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 5.521179] Control: 10c5387d Table: 80004019 DAC: 00000015 [ 5.526977] Process swapper/0 (pid: 1, stack limit = 0xce05a248) [ 5.532989] Stack: (0xce05bd10 to 0xce05c000) ... [ 5.734771] [<c0346f90>] (mem32_serial_in) from [<c034ab2c>] (serial8250_do_startup+0xc8/0x89c) [ 5.743530] [<c034ab2c>] (serial8250_do_startup) from [<c03461f8>] (uart_startup.part.3+0x7c/0x1dc) [ 5.752624] [<c03461f8>] (uart_startup.part.3) from [<c0346d68>] (uart_open+0xe4/0x124) [ 5.760681] [<c0346d68>] (uart_open) from [<c032c19c>] (tty_open+0x130/0x58c) [ 5.767852] [<c032c19c>] (tty_open) from [<c01216f4>] (chrdev_open+0x9c/0x174) [ 5.775115] [<c01216f4>] (chrdev_open) from [<c011b8d4>] (do_dentry_open+0x1d0/0x310) [ 5.783020] [<c011b8d4>] (do_dentry_open) from [<c011bd98>] (finish_open+0x34/0x4c) [ 5.790710] [<c011bd98>] (finish_open) from [<c012a8f8>] (do_last.isra.27+0x5a4/0xb98) [ 5.798675] [<c012a8f8>] (do_last.isra.27) from [<c012afa0>] (path_openat+0xb4/0x5e4) [ 5.806549] [<c012afa0>] (path_openat) from [<c012b7dc>] (do_filp_open+0x2c/0x80) [ 5.814086] [<c012b7dc>] (do_filp_open) from [<c011cd14>] (do_sys_open+0x100/0x1d0) [ 5.821777] [<c011cd14>] (do_sys_open) from [<c07b7ce0>] (kernel_init_freeable+0x124/0x1c8) [ 5.830200] [<c07b7ce0>] (kernel_init_freeable) from [<c054eb90>] (kernel_init+0x8/0xe4) [ 5.838348] [<c054eb90>] (kernel_init) from [<c000e868>] (ret_from_fork+0x14/0x2c) Sounds like the clocks are not enabled properly? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
