The OMAP version of the 8250 can actually use 1:1 serial8250_startup().
However it needs to be extended by a wakeup irq which should to be
requested & enabled at ->startup() time and disabled at ->shutdown() time.
v2…v3: properly copy callbacks
v1…v2: add shutdown callback
Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 26 ++++++++++++++++++++++++--
include/linux/serial_8250.h | 2 ++
include/linux/serial_core.h | 2 ++
3 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 5a6af19..bd0e1897 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1939,7 +1939,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
#endif /* CONFIG_CONSOLE_POLL */
-static int serial8250_startup(struct uart_port *port)
+int serial8250_do_startup(struct uart_port *port)
{
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
@@ -2191,8 +2191,17 @@ static int serial8250_startup(struct uart_port *port)
return 0;
}
+EXPORT_SYMBOL_GPL(serial8250_do_startup);
-static void serial8250_shutdown(struct uart_port *port)
+static int serial8250_startup(struct uart_port *port)
+{
+ if (port->startup)
+ return port->startup(port);
+ else
+ return serial8250_do_startup(port);
+}
+
+void serial8250_do_shutdown(struct uart_port *port)
{
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
@@ -2243,6 +2252,15 @@ static void serial8250_shutdown(struct uart_port *port)
if (port->irq)
serial_unlink_irq_chain(up);
}
+EXPORT_SYMBOL_GPL(serial8250_do_shutdown);
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ if (port->shutdown)
+ port->shutdown(port);
+ else
+ serial8250_do_shutdown(port);
+}
static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
{
@@ -3304,6 +3322,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
/* Possibly override set_termios call */
if (up->port.set_termios)
uart->port.set_termios = up->port.set_termios;
+ if (up->port.startup)
+ uart->port.startup = up->port.startup;
+ if (up->port.shutdown)
+ uart->port.shutdown = up->port.shutdown;
if (up->port.pm)
uart->port.pm = up->port.pm;
if (up->port.handle_break)
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index af47a8a..0ec21ec 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -114,6 +114,8 @@ extern void serial8250_early_out(struct uart_port *port, int offset, int value);
extern int setup_early_serial8250_console(char *cmdline);
extern void serial8250_do_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old);
+extern int serial8250_do_startup(struct uart_port *port);
+extern void serial8250_do_shutdown(struct uart_port *port);
extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
extern int fsl8250_handle_irq(struct uart_port *port);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 5bbb809..6f20ff0 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -122,6 +122,8 @@ struct uart_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
+ int (*startup)(struct uart_port *port);
+ void (*shutdown)(struct uart_port *port);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
