Linux Serial

• Thread Index

• Re: [RFC][PATCHv2 1/4] panic: avoid deadlocks in re-entrant console drivers
  • From: Petr Mladek
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• Re: [PATCH v2 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Palmer Dabbelt
• [PATCH stable v2 2/2] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
  • From: H. Peter Anvin (Intel)
• [PATCH stable v2 1/2] termios, tty/tty_baudrate.c: fix buffer overrun
  • From: H. Peter Anvin (Intel)
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Petr Mladek
• [PATCH 1/1] tty: serial: qcom_geni_serial: simplify getting .driver_data
  • From: Wolfram Sang
• [PATCH 0/1] tty: simplify getting .driver_data
  • From: Wolfram Sang
• Re: [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: Vinod
• Re: [PATCH v2 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Rob Herring
• [PATCH v3 2/2] tty: serial: add driver for the SiFive UART
  • From: Paul Walmsley
• [PATCH v3 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Paul Walmsley
• [PATCH v3 0/2] tty: serial: add DT bindings and serial driver for the SiFive FU540 UART
  • From: Paul Walmsley
• Re: [PATCH v2 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Paul Walmsley
• Re: [PATCH v2 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Rob Herring
• [PATCH v2 0/2] tty: serial: add DT bindings and serial driver for the SiFive FU540 UART
  • From: Paul Walmsley
• [PATCH v2 2/2] tty: serial: add driver for the SiFive UART
  • From: Paul Walmsley
• [PATCH v2 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Paul Walmsley
• Re: [PATCH 2/2] tty: serial: add driver for the SiFive UART (fwd)
  • From: Julia Lawall
• Re: [PATCH 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Palmer Dabbelt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: [PATCH 2/2] tty: serial: add driver for the SiFive UART
  • From: kbuild test robot
• Re: [PATCH 2/2] tty: serial: add driver for the SiFive UART
  • From: kbuild test robot
• Re: [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: sudheer.v
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Joel Fernandes
• Re: [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: Benjamin Herrenschmidt
• [PATCH 2/2] tty: serial: add driver for the SiFive UART
  • From: Paul Walmsley
• [PATCH 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
  • From: Paul Walmsley
• [PATCH 0/2] tty: serial: add DT bindings and serial driver for the SiFive FU540 UART
  • From: Paul Walmsley
• Re: [PATCH V3 3/8] dt-bindings: mmc: fsl-imx-esdhc: add imx8qxp compatible string
  • From: Rob Herring
• Re: [PATCH V3 2/8] dt-bindings: serial: lpuart: add imx8qxp compatible string
  • From: Rob Herring
• [PATCH V3 3/8] dt-bindings: mmc: fsl-imx-esdhc: add imx8qxp compatible string
  • From: A.s. Dong
• [PATCH V3 2/8] dt-bindings: serial: lpuart: add imx8qxp compatible string
  • From: A.s. Dong
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: Vinod
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: [PATCH 1/2] serial: set suppress_bind_attrs flag only if builtin
  • From: Jeffrey Hugo
• Re: [PATCH 1/2] serial: set suppress_bind_attrs flag only if builtin
  • From: Andrew Morton
• Re: [PATCH 1/2] serial: set suppress_bind_attrs flag only if builtin
  • From: Jeffrey Hugo
• Re: [PATCH 2/2] writeback: don't decrement wb->refcnt if !wb->bdi
  • From: Andrew Morton
• Re: [PATCH 1/2] serial: set suppress_bind_attrs flag only if builtin
  • From: Andrew Morton
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Kees Cook
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Joel Fernandes
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• [PATCH 2/2] writeback: don't decrement wb->refcnt if !wb->bdi
  • From: Anders Roxell
• [PATCH 1/2] serial: set suppress_bind_attrs flag only if builtin
  • From: Anders Roxell
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: [PATCH/RFC v2] serial: sh-sci: Fix fallback to PIO on DMA failure
  • From: Geert Uytterhoeven
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Petr Mladek
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Joel Fernandes
• Re: [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: Benjamin Herrenschmidt
• Re: [PATCH v3 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Fabien Lahoudere
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• Re: [PATCH] tty: serial: qcom_geni_serial: Don't slow all ports just for kgdb
  • From: msavaliy
• Re: [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: Vinod
• Re: [RFC][PATCHv2 1/4] panic: avoid deadlocks in re-entrant console drivers
  • From: Sergey Senozhatsky
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• [[PATCH] 8/9] DMA-UART-Driver-for-AST2500
  • From: sudheer.v
• [[PATCH] 4/9] Documentation-DTbindings-DMA-controller-of-AST2500
  • From: sudheer.v
• [[PATCH] 2/9] Defconfig-changes-for-DMA-UART-of-AST2500
  • From: sudheer.v
• [[PATCH] 1/9] DT-changes-for-DMA-UART-of-AST2500
  • From: sudheer.v
• [[PATCH] 0/9] *** DMA support for UART in ASPEED's AST2500 ***
  • From: sudheer.v
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Joel Fernandes
• Re: [PATCH] tty: serial: qcom_geni_serial: Don't slow all ports just for kgdb
  • From: Stephen Boyd
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Stephen Boyd
• Re: [PATCH] tty: serial: qcom_geni_serial: Rectify UART suspend mechanism
  • From: Doug Anderson
• Re: [PATCH] tty: serial: qcom_geni_serial: Add suspend support to non console UART
  • From: Doug Anderson
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Kees Cook
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Steven Rostedt
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• [PATCH] tty: serial: qcom_geni_serial: Rectify UART suspend mechanism
  • From: Mukesh, Savaliya
• Re: [LINUX PATCHv3 6/9] serial-uartlite: Change logic how console_port is setup
  • From: kbuild test robot
• [PATCH] tty: serial: qcom_geni_serial: Add suspend support to non console UART
  • From: Mukesh, Savaliya
• [PATCH/RFC v2] serial: sh-sci: Fix fallback to PIO on DMA failure
  • From: Geert Uytterhoeven
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• Re: [PATCH v2 tty/serial 2/2] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Fabio Estevam
• Re: [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Fabio Estevam
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• Re: Crash in msm serial on dragonboard with ftrace bootargs
  • From: Greg Kroah-Hartman
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Petr Mladek
• Crash in msm serial on dragonboard with ftrace bootargs
  • From: Sai Prakash Ranjan
• [LINUX PATCHv3 7/9] serial-uartlite: Use allocated structure instead of static ones
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 9/9] serial-uartlite: Remove SERIAL_UARTLITE_NR_UARTS
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 8/9] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 6/9] serial-uartlite: Change logic how console_port is setup
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 4/9] serial-uartlite: Add runtime support
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 5/9] serial-uartlite: Fix the unbind path
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 0/9] serial-uartlite: Add support for dynamic allocation
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 3/9] serial-uartlite: Do not use static struct uart_driver out of probe()
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 1/9] serial-uartlite: Move the uart register
  • From: shubhrajyoti.datta
• [LINUX PATCHv3 2/9] serial-uartlite: Add get serial id if not provided
  • From: shubhrajyoti.datta
• [RESEND PATCH 14/14] dt-bindings: serial: lantiq: Add optional properties for CCF
  • From: Songjun Wu
• [RESEND PATCH 13/14] serial: lantiq: Change init_lqasc to static declaration
  • From: Songjun Wu
• [RESEND PATCH 12/14] serial: lantiq: Replace lantiq_soc.h with lantiq.h
  • From: Songjun Wu
• [RESEND PATCH 10/14] serial: lantiq: Reorder the head files
  • From: Songjun Wu
• [RESEND PATCH 09/14] serial: lantiq: Add CCF support
  • From: Songjun Wu
• [RESEND PATCH 08/14] serial: lantiq: Replace clk_enable/clk_disable with clk generic API
  • From: Songjun Wu
• [RESEND PATCH 07/14] serial: lantiq: Rename fpiclk to freqclk
  • From: Songjun Wu
• [RESEND PATCH 06/14] serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32
  • From: Songjun Wu
• [RESEND PATCH 04/14] serial: lantiq: Change ltq_w32_mask to asc_update_bits
  • From: Songjun Wu
• [RESEND PATCH 03/14] serial: lantiq: Get serial id from dts
  • From: Songjun Wu
• [RESEND PATCH 00/14] serial: lantiq: Add CCF suppport
  • From: Songjun Wu
• Re: [PATCH 00/14] serial: langtiq: Add CCF suppport
  • From: Wu, Songjun
• Re: [RFC][PATCHv2 0/4] less deadlock prone serial consoles
  • From: Sergey Senozhatsky
• RE: [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Andy Duan
• Re: [PATCH v2 tty/serial 2/2] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Uwe Kleine-König
• Re: [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Uwe Kleine-König
• RE: [PATCH v2 tty/serial 0/2] clear parity enable bit when user disable parity
  • From: Andy Duan
• [PATCH v2 tty/serial 2/2] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Andy Duan
• [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Andy Duan
• [PATCH v2 tty/serial 0/2] clear parity enable bit when user disable parity
  • From: Andy Duan
• Re: [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Peter Zijlstra
• Re: [RFC][PATCHv2 0/4] less deadlock prone serial consoles
  • From: Peter Zijlstra
• RE: [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Andy Duan
• Re: [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Uwe Kleine-König
• [RFC][PATCHv2 4/4] tty: 8250: switch to uart_port locking helpers
  • From: Sergey Senozhatsky
• [RFC][PATCHv2 3/4] serial: introduce uart_port locking helpers
  • From: Sergey Senozhatsky
• [RFC][PATCHv2 2/4] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• [RFC][PATCHv2 1/4] panic: avoid deadlocks in re-entrant console drivers
  • From: Sergey Senozhatsky
• [RFC][PATCHv2 0/4] less deadlock prone serial consoles
  • From: Sergey Senozhatsky
• [PATCH v2 tty/serial 2/2] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Andy Duan
• [PATCH v2 tty/serial 1/2] serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
  • From: Andy Duan
• [PATCH v2 tty/serial 0/2] clear parity enable bit when user disable parity
  • From: Andy Duan
• RE: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Andy Duan
• Re: [PATCH 00/14] serial: langtiq: Add CCF suppport
  • From: Paul Burton
• [PATCH] tty: serial: qcom_geni_serial: Don't slow all ports just for kgdb
  • From: Douglas Anderson
• Re: [PATCHv2 0/9] serial-uartlite: Add support for dynamic allocation
  • From: Greg KH
• Re: [PATCH v3 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Greg KH
• Re: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Greg Kroah-Hartman
• Re: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Fabio Estevam
• RE: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Andy Duan
• RE: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Andy Duan
• Re: [PATCH] serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
  • From: Wolfram Sang
• Re: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Fabio Estevam
• Re: [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [PATCH tty/serial 1/1] serial: fsl_lpuart: clear parity enable bit when disable parity
  • From: Andy Duan
• Re: [PATCH] serial: sh-sci: do not warn if DMA transfers are not supported
  • From: Wolfram Sang
• Re: [PATCH v2] of: base: Change logic in of_alias_get_alias_list()
  • From: Rob Herring
• [PATCH] serial: sh-sci: do not warn if DMA transfers are not supported
  • From: Ulrich Hecht
• Re: [PATCH] serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
  • From: Wolfram Sang
• [PATCH v2] serial: core: Fix race between freeing and writing to transmit buffer
  • From: Ole Bjørn Midtbø
• Re: Insanely high baud rates
  • From: H. Peter Anvin
• Re: [PATCH] serial: core: Fix race between freeing and writing to transmit buffer
  • From: Jiri Slaby
• [PATCH v2] of: base: Change logic in of_alias_get_alias_list()
  • From: Michal Simek
• Re: Insanely high baud rates
  • From: Theodore Y. Ts'o
• Re: Insanely high baud rates
  • From: Craig Milo Rogers
• Re: Insanely high baud rates
  • From: H. Peter Anvin
• Re: Insanely high baud rates
  • From: hpa
• Re: Insanely high baud rates
  • From: Alan Cox
• [PATCH v3 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Fabien Lahoudere
• Re: Insanely high baud rates
  • From: hpa
• Re: Insanely high baud rates
  • From: Alan Cox
• Re: [PATCH v2 0/2] tty: erase buffers when the kernel is done with it.
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 0/2] tty: erase buffers when the kernel is done with it.
  • From: Milan Broz
• [PATCH] serial: core: Fix race between freeing and writing to transmit buffer
  • From: Ole Bjørn Midtbø
• Re: [PATCH v3] serial: fsl_lpuart: Remove the alias node dependence
  • From: Greg KH
• [PATCH v3] serial: fsl_lpuart: Remove the alias node dependence
  • From: Vabhav Sharma
• Re: [PATCH v3] serial: fsl_lpuart: Remove the alias node dependence
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH v3] serial: fsl_lpuart: Remove the alias node dependence
  • From: Vabhav Sharma
• Re: Insanely high baud rates
  • From: H. Peter Anvin
• Re: Insanely high baud rates
  • From: Willy Tarreau
• Insanely high baud rates
  • From: H. Peter Anvin
• [PATCH] serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
  • From: Geert Uytterhoeven
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH] of: base: Change logic in of_alias_get_alias_list()
  • From: Michal Simek
• Insanely high baud rates
  • From: hpa
• Re: [PATCH stable v2 2/2] termios, tty/tty_baudrate.c: simplify, auto-generate baud table
  • From: H. Peter Anvin
• Re: [PATCH stable v2 1/2] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
  • From: H. Peter Anvin
• Re: [PATCH stable v2 2/2] termios, tty/tty_baudrate.c: simplify, auto-generate baud table
  • From: Johan Hovold
• Re: [PATCH stable v2 1/2] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
  • From: Johan Hovold
• Re: [PATCH stable v2 0/2] termios: Alpha BOTHER/IBSHIFT, tty_baudrate fix
  • From: Johan Hovold
• Re: [PATCH] of: base: Change logic in of_alias_get_alias_list()
  • From: Rob Herring
• [PATCH] of: base: Change logic in of_alias_get_alias_list()
  • From: Michal Simek
• [PATCH] serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES
  • From: Michal Simek
• [PATCHv2 8/9] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: shubhrajyoti.datta
• [PATCHv2 7/9] serial-uartlite: Use allocated structure instead of static ones
  • From: shubhrajyoti.datta
• [PATCHv2 6/9] serial-uartlite: Change logic how console_port is setup
  • From: shubhrajyoti.datta
• [PATCHv2 9/9] serial-uartlite: Remove SERIAL_UARTLITE_NR_UARTS
  • From: shubhrajyoti.datta
• [PATCHv2 3/9] serial-uartlite: Do not use static struct uart_driver out of probe()
  • From: shubhrajyoti.datta
• [PATCHv2 4/9] serial-uartlite: Add runtime support
  • From: shubhrajyoti.datta
• [PATCHv2 5/9] serial-uartlite: Fix the unbind path
  • From: shubhrajyoti.datta
• [PATCHv2 2/9] serial-uartlite: Add get serial id if not provided
  • From: shubhrajyoti.datta
• [PATCHv2 1/9] serial-uartlite: Move the uart register
  • From: shubhrajyoti.datta
• [PATCHv2 0/9] serial-uartlite: Add support for dynamic allocation
  • From: shubhrajyoti.datta
• [PATCH stable v2 2/2] termios, tty/tty_baudrate.c: simplify, auto-generate baud table
  • From: H. Peter Anvin
• [PATCH stable v2 0/2] termios: Alpha BOTHER/IBSHIFT, tty_baudrate fix
  • From: H. Peter Anvin
• [PATCH stable v2 1/2] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
  • From: H. Peter Anvin
• Re: [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Matwey V. Kornilov
• [GIT PULL] TTY/Serial fixes for 4.19-rc7
  • From: Greg KH
• [PATCH stable 2/2] termios, tty/tty_baudrate.c: simplify, auto-generate baud table
  • From: H. Peter Anvin
• [PATCH stable 0/2] termios: Alpha BOTHER/IBSHIFT, tty_baudrate fix
  • From: H. Peter Anvin
• [PATCH stable 1/2] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
  • From: H. Peter Anvin
• Re: Status of BOTHER
  • From: H. Peter Anvin
• Re: Status of BOTHER
  • From: hpa
• Re: Status of BOTHER
  • From: Johan Hovold
• Re: [PATCH 8/9] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Shubhrajyoti Datta
• Re: Status of BOTHER
  • From: hpa
• Re: Status of BOTHER
  • From: Alan Cox
• Re: Status of BOTHER
  • From: H. Peter Anvin
• Re: [PATCH v2 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Vinod
• Re: [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Uwe Kleine-König
• Re: [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Matwey V. Kornilov
• Re: [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Uwe Kleine-König
• Re: Status of BOTHER
  • From: Johan Hovold
• Re: [PATCH 8/9] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Michal Simek
• [PATCH 8/9] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: shubhrajyoti.datta
• [PATCH 7/9] serial-uartlite: Use allocated structure instead of static ones
  • From: shubhrajyoti.datta
• [PATCH 6/9] serial-uartlite: Change logic how console_port is setup
  • From: shubhrajyoti.datta
• [PATCH 3/9] serial-uartlite: Do not use static struct uart_driver out of probe()
  • From: shubhrajyoti.datta
• [PATCH 9/9] serial-uartlite: Remove SERIAL_UARTLITE_NR_UARTS
  • From: shubhrajyoti.datta
• [PATCH 2/9] serial-uartlite: Add get serial id if not provided
  • From: shubhrajyoti.datta
• [PATCH 5/9] serial-uartlite: Fix the unbind path
  • From: shubhrajyoti.datta
• [PATCH 1/9] serial-uartlite: Move the uart register
  • From: shubhrajyoti.datta
• [PATCH 4/9] serial-uartlite: Add runtime support
  • From: shubhrajyoti.datta
• [PATCH 0/9] serial-uartlite: Add support for dynamic allocation
  • From: shubhrajyoti.datta
• Re: [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Matwey V. Kornilov
• Re: [PATCH 1/5] asm-generic, termios: add alias constants from MIPS
  • From: Geert Uytterhoeven
• patch "TTY: sn_console: Replace spin_is_locked() with spin_trylock()" added to tty-next
  • From: gregkh
• Re: [PATCH 5/5] arch/xtensa, termios: use <asm-generic/termbits.h>
  • From: H. Peter Anvin
• Re: [PATCH 5/5] arch/xtensa, termios: use <asm-generic/termbits.h>
  • From: Max Filippov
• [PATCH 1/5] asm-generic, termios: add alias constants from MIPS
  • From: H. Peter Anvin (Intel)
• [PATCH 3/5] arch/mips, termios: use <asm-generic/termbits.h>
  • From: H. Peter Anvin (Intel)
• [PATCH 2/5] arch/ia64, termios: use <asm-generic/termbits.h>
  • From: H. Peter Anvin (Intel)
• [PATCH 0/5] termios: remove arch redundancy in <asm/termbits.h>
  • From: H. Peter Anvin (Intel)
• [PATCH 4/5] arch/parisc, termios: use <asm-generic/termios.h>
  • From: H. Peter Anvin (Intel)
• [PATCH 5/5] arch/xtensa, termios: use <asm-generic/termbits.h>
  • From: H. Peter Anvin (Intel)
• Re: [PATCH] serial: samsung: don't use "unused" uart_port struct member for tx/rx enable
  • From: Steve Sakoman
• [PATCH] [RFC v2] alpha, termios: implement BOTHER and termios2
  • From: H. Peter Anvin (Intel)
• [PATCH] [RFC] alpha, termios: implement BOTHER and termios2
  • From: H. Peter Anvin (Intel)
• Re: Status of BOTHER
  • From: H. Peter Anvin
• Re: [PATCH] serial: samsung: don't use "unused" uart_port struct member for tx/rx enable
  • From: Greg KH
• Re: [PATCH] serial: samsung: don't use "unused" uart_port struct member for tx/rx enable
  • From: Steve Sakoman
• Re: [PATCH] serial: samsung: don't use "unused" uart_port struct member for tx/rx enable
  • From: Greg KH
• Re: [PATCH] serial: samsung: don't use "unused" uart_port struct member for tx/rx enable
  • From: Greg KH
• [PATCH] serial: samsung: don't use "unused" uart_port struct member for tx/rx enable
  • From: Steve Sakoman
• patch "TTY: sn_console: Replace spin_is_locked() with spin_trylock()" added to tty-testing
  • From: gregkh
• [PATCH v2 2/2] tty: wipe buffer if not echoing data
  • From: Greg Kroah-Hartman
• [PATCH v2 1/2] tty: wipe buffer.
  • From: Greg Kroah-Hartman
• [PATCH v2 0/2] tty: erase buffers when the kernel is done with it.
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: sh-sci: Add r8a77990 support
  • From: Simon Horman
• Re: [PATCH] Revert "serial: 8250_dw: Fix runtime PM handling"
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Andy Shevchenko
• [PATCH] serial: 8250: respect rts_before_send before sending chars
  • From: Uwe Kleine-König
• [PATCH] TTY: Replace spin_is_locked() with spin_trylock()
  • From: Lance Roy
• Re: [PATCH 0/2] serial: sh-sci: Use pm_runtime_get_sync()/put()
  • From: Wolfram Sang
• [PATCH] serial: sh-sci: Add r8a77990 support
  • From: Wolfram Sang
• Re: [PATCH 2/2] tty: wipe buffer if not echoing data
  • From: Milan Broz
• Re: Status of BOTHER
  • From: Alan Cox
• Re: [PATCH 0/2] serial: sh-sci: Fix earlycon on Renesas ARM platforms
  • From: Greg KH
• Re: Re: [PATCH] tty:serial:imx: use spin_lock instead of spin_lock_irqsave in isr
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Greg Kroah-Hartman
• Re: Status of BOTHER
  • From: H. Peter Anvin
• Status of BOTHER
  • From: H. Peter Anvin
• [PATCH 2/2] tty: wipe buffer if not echoing data
  • From: Greg Kroah-Hartman
• [PATCH 1/2] tty: wipe buffer.
  • From: Greg Kroah-Hartman
• [PATCH 0/2] tty: erase buffers when the kernel is done with it.
  • From: Greg Kroah-Hartman
• [PATCH] Revert "serial: 8250_dw: Fix runtime PM handling"
  • From: Guenter Roeck
• Re: [BUG] sleep in atomic in 8250 runtime PM code path
  • From: Andy Shevchenko
• Re: [BUG] sleep in atomic in 8250 runtime PM code path
  • From: Tony Lindgren
• Re: [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Linus Walleij
• Re: [PATCH] tty:serial:imx: use spin_lock instead of spin_lock_irqsave in isr
  • From: Uwe Kleine-König
• Re: [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Marek Szyprowski
• Re: [PATCH v2 1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
  • From: kbuild test robot
• Re: [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Andreas Färber
• [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Janusz Krzysztofik
• Re: [BUG] sleep in atomic in 8250 runtime PM code path
  • From: Russell King - ARM Linux
• [PATCH v2 3/3] tty: serial: Add Tx DMA support for UART in Actions Semi Owl SoCs
  • From: Manivannan Sadhasivam
• [PATCH v2 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Manivannan Sadhasivam
• [PATCH v2 1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
  • From: Manivannan Sadhasivam
• [PATCH v2 0/3] Add slave DMA support for Actions Semi S900 SoC
  • From: Manivannan Sadhasivam
• [BUG] sleep in atomic in 8250 runtime PM code path
  • From: Jisheng Zhang
• Re: [PATCH] tty: Convert to using %pOFn instead of device_node.name
  • From: Rob Herring
• Re: [PATCH] tty: Convert to using %pOFn instead of device_node.name
  • From: Rob Herring
• [PATCH v2 3/3] serial: 8250_uniphier: add auto-flow-control support
  • From: Masahiro Yamada
• [PATCH v2 2/3] serial: 8250_uniphier: flatten probe function
  • From: Masahiro Yamada
• [PATCH v2 1/3] serial: 8250_uniphier: remove unused "fifo-size" property
  • From: Masahiro Yamada
• [PATCH v2 0/3] serial: 8250_uniphier: remove unused code and add auto-flow-control
  • From: Masahiro Yamada
• Re: [PATCH 0/2] serial: sh-sci: Fix earlycon on Renesas ARM platforms
  • From: Geert Uytterhoeven
• RE: [PATCH V2] serial:serial_core: Allow use of CTS for PPS line discipline
  • From: Eric C Gallimore
• [PATCH v5 2/2] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• [PATCH v5 1/2] tty/serial_core: add ISO7816 infrastructure
  • From: Ludovic Desroches
• [PATCH v5 0/2] add ISO7816 support
  • From: Ludovic Desroches
• Re: [PATCH v4 2/2] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• Re: [RESEND PATCH v3 2/2] serial: uartps: Change uart ID port allocation
  • From: Michal Simek
• Re: [PATCH -next] serial: uartps: Fix missing unlock on error in cdns_get_id()
  • From: Michal Simek
• [GIT PULL] TTY/Serial fixes for 4.19-rc6
  • From: Greg KH
• [PATCH -next] serial: uartps: Fix missing unlock on error in cdns_get_id()
  • From: Wei Yongjun
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Marek Szyprowski
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik
• [PATCH 08/14] serial: lantiq: Replace clk_enable/clk_disable with clk generic API
  • From: Songjun Wu
• [PATCH 07/14] serial: lantiq: Rename fpiclk to freqclk
  • From: Songjun Wu
• [PATCH 00/14] serial: langtiq: Add CCF suppport
  • From: Songjun Wu
• [PATCH 12/14] serial: lantiq: Replace lantiq_soc.h with lantiq.h
  • From: Songjun Wu
• [PATCH 14/14] dt-bindings: serial: lantiq: Add optional properties for CCF
  • From: Songjun Wu
• [PATCH 03/14] serial: lantiq: Get serial id from dts
  • From: Songjun Wu
• [PATCH 13/14] serial: lantiq: Change init_lqasc to static declaration
  • From: Songjun Wu
• [PATCH 10/14] serial: lantiq: Reorder the head files
  • From: Songjun Wu
• [PATCH 06/14] serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32
  • From: Songjun Wu
• [PATCH 09/14] serial: lantiq: Add CCF support
  • From: Songjun Wu
• [PATCH 04/14] serial: lantiq: Change ltq_w32_mask to asc_update_bits
  • From: Songjun Wu
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Marek Szyprowski
• Re: [PATCH] dt-bindings: serial: sh-sci: Document r8a7744 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH] dt-bindings: serial: sh-sci: Document r8a7744 bindings
  • From: Simon Horman
• Re: [PATCH 2/2] gpiolib: Fix array members of same chip processed separately
  • From: Linus Walleij
• Re: [PATCH 1/2] gpiolib: Fix missing updates of bitmap index
  • From: Linus Walleij
• Re: [RESEND PATCH v3 2/2] serial: uartps: Change uart ID port allocation
  • From: Geert Uytterhoeven
• [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik
• [PATCH 2/2] gpiolib: Fix array members of same chip processed separately
  • From: Janusz Krzysztofik
• [PATCH 1/2] gpiolib: Fix missing updates of bitmap index
  • From: Janusz Krzysztofik
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik
• Re: [PATCH] ARM: add serial.h and set BASE_BAUD to 0
  • From: Rafał Miłecki
• [PATCH] dt-bindings: serial: sh-sci: Document r8a7744 bindings
  • From: Biju Das
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski
• Re: [PATCH] ARM: add serial.h and set BASE_BAUD to 0
  • From: Russell King - ARM Linux
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski
• RE: [PATCH] serial: imx: restore handshaking irq for imx1
  • From: Andy Duan
• [PATCH] ARM: add serial.h and set BASE_BAUD to 0
  • From: Rafał Miłecki
• [PATCH V2] serial:serial_core: Allow use of CTS for PPS line discipline
  • From: Steve Sakoman
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Dan Carpenter
• Re: [PATCH] serial:serial_core: Allow use of CTS for PPS line discipline
  • From: Steve Sakoman
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Linus Walleij
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik
• Re: [PATCH] serial: imx: restore handshaking irq for imx1
  • From: Leonard Crestez
• [PATCH] serial: imx: restore handshaking irq for imx1
  • From: Uwe Kleine-König
• Re: [PATCH -next] serial: imx: remove set but not used variable 'rtsirq'
  • From: YueHaibing
• Re: [PATCH v3 2/2] serial: uartps: Change uart ID port allocation
  • From: Michal Simek
• [RESEND PATCH v3 2/2] serial: uartps: Change uart ID port allocation
  • From: Michal Simek
• Re: [PATCH v3 2/2] serial: uartps: Change uart ID port allocation
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial:serial_core: Allow use of CTS for PPS line discipline
  • From: Greg KH
• RE: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Andy Duan
• Re: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Lucas Stach
• RE: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Andy Duan
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski
• RE: [PATCH -next] serial: imx: remove set but not used variable 'rtsirq'
  • From: Andy Duan
• Re: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Lucas Stach
• Re: [PATCH -next] serial: imx: remove set but not used variable 'rtsirq'
  • From: Leonard Crestez
• RE: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Robin Gong
• Re: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Uwe Kleine-König
• [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data
  • From: Robin Gong
• Re: [PATCH -next] serial: imx: remove set but not used variable 'rtsirq'
  • From: Uwe Kleine-König
• [PATCH 3/4] serial: 8250-mtk: add uart DMA support
  • From: Long Cheng
• [PATCH 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
  • From: Long Cheng
• [PATCH 4/4] arm: dts: mt2701: add uart APDMA to device tree
  • From: Long Cheng
• [PATCH 1/4] dt-bindings: dma: uart: add uart dma bindings
  • From: Long Cheng
• [PATCH 0/4] add uart DMA function
  • From: Long Cheng
• Re: [PATCH 0/2] serial: sh-sci: Use pm_runtime_get_sync()/put()
  • From: Ulrich Hecht
• [PATCH -next] tty: serial: remove set but not used variable 'error'
  • From: YueHaibing
• [PATCH -next] serial: imx: remove set but not used variable 'rtsirq'
  • From: YueHaibing
• Re: [PATCH v8 0/4] gpiolib: speed up GPIO array processing
  • From: Linus Walleij
• Re: [PATCH] serial:serial_core: Allow use of CTS for PPS line discipline
  • From: Steve Sakoman
• [PATCH] serial:serial_core: Allow use of CTS for PPS line discipline
  • From: Steve Sakoman
• [PATCH 2/3] serial: 8250_uniphier: flatten probe function
  • From: Masahiro Yamada
• [PATCH 3/3] serial: 8250_uniphier: add auto-flow-control support
  • From: Masahiro Yamada
• [PATCH 0/3] serial: 8250_uniphier: remove unused code and add auto-flow-control
  • From: Masahiro Yamada
• [PATCH 1/3] serial: 8250_uniphier: remove unused "fifo-size" property
  • From: Masahiro Yamada
• Re: [PATCH 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Manivannan Sadhasivam
• Re: [PATCH 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Manivannan Sadhasivam
• Re: [PATCH 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Vinod
• Re: [PATCH 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Manivannan Sadhasivam
• Re: [PATCH 2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  • From: Vinod
• [PATCH v3 2/2] serial: uartps: Change uart ID port allocation
  • From: Michal Simek
• [tty:tty-testing 15/46] drivers/tty/serial/xilinx_uartps.c:1398:3-9: preceding lock on line 1391 (fwd)
  • From: Julia Lawall
• Re: [tty:tty-testing 15/44] drivers/tty/serial/xilinx_uartps.c:1395:9: error: implicit declaration of function 'of_alias_get_alias_list'; did you mean 'of_alias_get_highest_id'?
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Rogier Wolff
• [tty:tty-testing 15/44] drivers/tty/serial/xilinx_uartps.c:1395:9: error: implicit declaration of function 'of_alias_get_alias_list'; did you mean 'of_alias_get_highest_id'?
  • From: kbuild test robot
• Re: [PATCH v4 2/2] tty/serial: atmel: add ISO7816 support
  • From: Greg KH
• Re: [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Phil Elwell
• Re: [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Greg Kroah-Hartman
• Re: /dev/ttyS0 problems after commit ecb988a3b7985913d1f0112f66667cdd15e40711
  • From: Greg KH
• Re: [PATCH v3 00/10] serial: uartps: Add run time support for more IPs than hardcoded 2
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 00/10] serial: uartps: Add run time support for more IPs than hardcoded 2
  • From: Michal Simek
• [PATCH v2 2/2] serial: uartps: Change uart ID port allocation
  • From: Michal Simek
• Re: [PATCH] serial: sh-sci: Add earlycon for R7S9210
  • From: Geert Uytterhoeven
• [PATCH v2 5/5] serial: sprd: Fix the indentation issue
  • From: Baolin Wang
• [PATCH v2 4/5] serial: sprd: Change 'int' to 'unsigned int'
  • From: Baolin Wang
• [PATCH v2 3/5] serial: sprd: Remove unnecessary resource validation
  • From: Baolin Wang
• [PATCH v2 2/5] serial: sprd: Use readable macros instead of magic number
  • From: Baolin Wang
• [PATCH v2 1/5] serial: sprd: Remove unused structure
  • From: Baolin Wang
• [PATCH] serial: sh-sci: Add earlycon for R7S9210
  • From: Chris Brandt
• RE: [PATCH 2/2] Revert "serial: sh-sci: Allow for compressed SCIF address"
  • From: Chris Brandt
• RE: [PATCH 1/2] Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
  • From: Chris Brandt
• Re: [PATCH v2] serial: 8250_of: Fix for lack of interrupt support
  • From: John Garry
• Re: [PATCH] serial: samsung: Enable baud clock for UART reset procedure in resume
  • From: Krzysztof Kozlowski
• Re: 答复: Re: 答复: Re: [PATCH] tty: max3100: Fix oops while 'cat/proc/tty/driver/ttyMAX'
  • From: Jiri Slaby
• Re: 答复: Re: [PATCH] tty: max3100: Fix oops while 'cat/proc/tty/driver/ttyMAX'
  • From: Jiri Slaby
• [GIT PULL] TTY/Serial fixes for 4.19-rc4
  • From: Greg KH
• Re: [PATCH] serial: 8250: Rate limit serial port rx interrupts during input overruns
  • From: Vignesh R
• [PATCH] serial: cpm_uart: return immediately from console poll
  • From: Christophe Leroy
• Re: SERIAL_IMX in RS485 mode - EOT, read back
  • From: Adam Rudziński
• SERIAL_IMX in RS485 mode - EOT, read back
  • From: Adam Rudziński
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Stefan Agner
• Re: [PATCH v8 0/4] gpiolib: speed up GPIO array processing
  • From: Linus Walleij
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Linus Walleij
• [PATCH] serial: samsung: Enable baud clock for UART reset procedure in resume
  • From: Marek Szyprowski
• Re: [PATCH] tty: max3100: Fix oops while 'cat /proc/tty/driver/ttyMAX'
  • From: Jiri Slaby
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Radu Pirea
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• [PATCH 0/2] sc16is7xx interrupt fixes
  • From: Phil Elwell
• [PATCH 2/2] sc16is7xx: Fix for "Unexpected interrupt: 8"
  • From: Phil Elwell
• [PATCH 1/2] sc16is7xx: Fix for multi-channel stall
  • From: Phil Elwell
• Re: [PATCH 00/25] Change tty_port(standard)_install's return type
  • From: Alan Cox
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Linus Walleij
• [PATCH] tty: serial: Bug fix XR17C/D Exar chips sleep request.
  • From: Jonatan Goebel
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Geert Uytterhoeven
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Fabio Estevam
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Geert Uytterhoeven
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Geert Uytterhoeven
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Geert Uytterhoeven
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Geert Uytterhoeven
• Re: [GIT PULL v2] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Greg KH
• Re: [GIT PULL v2] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: [GIT PULL v2] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Greg KH
• Re: [PATCH] kgdboc: Fix restrict error
  • From: Daniel Thompson
• Re: [PATCH 1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
  • From: kbuild test robot
• [GIT PULL v2] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• [GIT PULL v2] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Greg KH
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Nicolas Ferre
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Alexandre Belloni
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Greg KH
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Radu Nicolae Pirea
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Uwe Kleine-König
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• Re: [PATCH 1/5] serial: sprd: Remove unused structure
  • From: Baolin Wang
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Uwe Kleine-König
• [PATCH] serial: 8250: Rate limit serial port rx interrupts during input overruns
  • From: Darwin Dingel
• [PATCH] kgdboc: Fix restrict error
  • From: Laura Abbott
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Fabio Estevam
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Fabio Estevam
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• Re: SERIAL_IMX shutdown in RS485 mode
  • From: Fabio Estevam
• SERIAL_IMX shutdown in RS485 mode
  • From: Adam Rudziński
• Re: [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Greg KH
• [GIT PULL] Immutable branch between MFD, SPI and TTY due for the v4.20 merge window
  • From: Lee Jones
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v4 2/2] tty/serial: atmel: add ISO7816 support
  • From: Richard Genoud
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Nicolas Ferre
• Re: [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH] serial: 8250_omap: Make 8250_omap driver driver depend on ARCH_K3
  • From: Vignesh R
• Re: [PATCH 0/3] ARM: OMAP1: ams-delta: Clean up GPIO setup for MODEM
  • From: Tony Lindgren
• [PATCH v4 0/2] add ISO7816 support
  • From: Ludovic Desroches
• [PATCH v4 2/2] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• [PATCH v4 1/2] tty/serial_core: add ISO7816 infrastructure
  • From: Ludovic Desroches
• Re: [PATCH] tty: serial: qcom_geni_serial: Fix serial when not used as console
  • From: Matthias Kaehlcke
• [PATCH v8 0/4] gpiolib: speed up GPIO array processing
  • From: Janusz Krzysztofik
• [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik
• [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions
  • From: Janusz Krzysztofik
• [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware
  • From: Janusz Krzysztofik
• [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
  • From: Janusz Krzysztofik
• [PATCH] tty: serial: qcom_geni_serial: Fix serial when not used as console
  • From: Douglas Anderson
• Re: [PATCH v3 2/2] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• Re: [PATCH v3 2/2] tty/serial: atmel: add ISO7816 support
  • From: Richard Genoud
• Re: [PATCH v3 2/2] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• Re: [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions
  • From: kbuild test robot
• Re: [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
  • From: kbuild test robot
• Re: [PATCH 01/25] tty: Change return type to void
  • From: Jiri Slaby
• Re: [PATCH V2 2/2] tty: serial: imx: add pinctrl sleep/default mode switch for suspend
  • From: Uwe Kleine-König
• Re: [PATCH V2 1/2] tty: serial: imx: add lock for registers save/restore
  • From: Uwe Kleine-König
• [PATCH V2 1/2] tty: serial: imx: add lock for registers save/restore
  • From: Anson Huang
• [PATCH V2 2/2] tty: serial: imx: add pinctrl sleep/default mode switch for suspend
  • From: Anson Huang
• RE: [PATCH 1/2] tty: serial: imx: add lock for registers save/restore
  • From: Anson Huang
• Re: [PATCH 2/2] tty: serial: imx: add pinctrl sleep/default mode switch for suspend
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] tty: serial: imx: add lock for registers save/restore
  • From: Uwe Kleine-König
• Re: [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
  • From: kbuild test robot
• Re: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
  • From: kbuild test robot
• Re: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
  • From: kbuild test robot
• Re: [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions
  • From: kbuild test robot
• Re: [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions
  • From: kbuild test robot
• [PATCH v12 4/6] MAINTAINERS: add at91 usart spi driver
  • From: Radu Pirea
• [PATCH v12 1/6] MAINTAINERS: add at91 usart mfd driver
  • From: Radu Pirea
• [PATCH v12 0/6] Driver for at91 usart in spi mode
  • From: Radu Pirea
• [PATCH v12 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
  • From: Radu Pirea
• [PATCH v12 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Radu Pirea
• [PATCH v12 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Radu Pirea
• [PATCH v12 2/6] dt-bindings: add binding for atmel-usart in SPI mode
  • From: Radu Pirea
• Re: [PATCH 01/25] tty: Change return type to void
  • From: Sergei Shtylyov
• Re: [PATCH 5/5] serial: sprd: Fix the indentation issue
  • From: Chunyan Zhang
• Re: [PATCH 4/5] serial: sprd: Change 'int' to 'unsigned int'
  • From: Chunyan Zhang
• Re: [PATCH 3/5] serial: sprd: Remove unnecessary resource validation
  • From: Chunyan Zhang
• Re: [PATCH 2/5] serial: sprd: Use readable macros instead of magic number
  • From: Chunyan Zhang
• Re: [PATCH 1/5] serial: sprd: Remove unused structure
  • From: Chunyan Zhang
• Re: [PATCH 1/5] serial: sprd: Remove unused structure
  • From: Baolin Wang
• Re: [PATCH 00/25] Change tty_port(standard)_install's return type
  • From: Sam Ravnborg
• [PATCH 01/25] tty: Change return type to void
  • From: Jaejoong Kim
• [PATCH 00/25] Change tty_port(standard)_install's return type
  • From: Jaejoong Kim
• [PATCH 03/25] s390: char: con3215: Change return type to void
  • From: Jaejoong Kim
• [PATCH 04/25] s390: char: tty3270: Change return type to void
  • From: Jaejoong Kim
• [PATCH 05/25] tty: hvc: hvc_console: Change return type to void
  • From: Jaejoong Kim
• [PATCH 06/25] tty: hvc: hvcs: Change return type to void
  • From: Jaejoong Kim
• [PATCH 07/25] tty: mips_ejtag_fdc: Change return type to void
  • From: Jaejoong Kim
• [PATCH 08/25] tty: n_gsm: Change return type to void
  • From: Jaejoong Kim
• [PATCH 09/25] tty: serial: kgdb_nmi: Change return type to void
  • From: Jaejoong Kim
• [PATCH 13/25] usb: xhci: dbc: Change return type to void
  • From: Jaejoong Kim
• [PATCH 12/25] tty: vt: Change return type to void
  • From: Jaejoong Kim
• [PATCH 11/25] tty: synclinkmp: Change return type to void
  • From: Jaejoong Kim
• [PATCH 15/25] um: Change return type to void
  • From: Jaejoong Kim
• [PATCH 16/25] isdn: capi: Change return type to void
  • From: Jaejoong Kim
• [PATCH 17/25] misc: pti: Change return type to void
  • From: Jaejoong Kim
• [PATCH 18/25] mmc: core: sdio_uart: Change return type to void
  • From: Jaejoong Kim
• [PATCH 19/25] staging: fwserial: Change return type to void
  • From: Jaejoong Kim
• [PATCH 25/25] usb: usb-serial: Change return type to void
  • From: Jaejoong Kim
• [PATCH 24/25] usb: cdc-acm: Change return type to void
  • From: Jaejoong Kim
• [PATCH 23/25] tty: vcc: Change return type to void
  • From: Jaejoong Kim
• [PATCH 22/25] tty: nozomi: Change return type to void
  • From: Jaejoong Kim
• [PATCH 21/25] staging: greybus: uart: Change return type to void
  • From: Jaejoong Kim
• [PATCH 20/25] staging: gdm724x: gdm_tty: Change return type to void
  • From: Jaejoong Kim
• [PATCH 14/25] Bluetooth: Change return type to void
  • From: Jaejoong Kim