Hi, Here is the series of patches the initial support for SC2000(M10V) of Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in source code. SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for computer vision. It also features advanced functionalities such as 360-degree, real-time spherical stitching with multi cameras, image stabilization for without mechanical gimbals, and rolling shutter correction. More detail is below: https://www.socionext.com/en/products/assp/milbeaut/SC2000.html Specifications for developers are below: - Quad-core 32bit Cortex-A7 on ARMv7-A architecture - NEON support - DSP - GPU - MAX 3GB DDR3 - Cortex-M0 for power control - NAND Flash Interface - SD UHS-I - SD UHS-II - SDIO - USB2.0 HOST / Device - USB3.0 HOST / Device - PCI express Gen2 - Ethernet Engine - I2C - UART - SPI - PWM Support is quite minimal for now, since it only includes timer, clock, pictrl and serial controller drivers, so we can only boot to userspace through initramfs. Support for the other peripherals will come eventually. Sugaya Taichi (14): ARM: milbeaut: Add basic support for Milbeaut m10v SoC dt-bindings: soc: milbeaut: Add Milbeaut trampoline description ARM: milbeaut: Add Milbeaut M10V early printk dt-bindings: timer: Add Milbeaut M10V timer description clocksource/drivers/timer-milbeaut: Add Milbeaut M10V timer dt-bindings: clock: milbeaut: add Milbeaut clock description clock: milbeaut: Add Milbeaut M10V clock control dt-bindings: serial: Add Milbeaut M10V serial description serial: Add Milbeaut M10V serial control dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description pinctrl: milbeaut: Add Milbeaut M10V pinctrl ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board ARM: configs: Add Milbeaut M10V defconfig MAINTAINERS: Add entry to MAINTAINERS for Milbeaut .../devicetree/bindings/clock/milbeaut-clock.txt | 93 +++ .../pinctrl/socionext,milbeaut-pinctrl.txt | 33 + .../devicetree/bindings/serial/milbeaut-uart.txt | 23 + .../bindings/soc/socionext/socionext,m10v.txt | 12 + .../bindings/timer/socionext,milbeaut-timer.txt | 17 + MAINTAINERS | 9 + arch/arm/Kconfig | 2 + arch/arm/Kconfig.debug | 12 +- arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/milbeaut-m10v-evb.dts | 35 + arch/arm/boot/dts/milbeaut-m10v-evb.dtsi | 17 + arch/arm/boot/dts/milbeaut-m10v.dtsi | 510 ++++++++++++++ arch/arm/configs/milbeaut_m10v_defconfig | 364 ++++++++++ arch/arm/include/debug/milbeaut.S | 25 + arch/arm/mach-milbeaut/Kconfig | 28 + arch/arm/mach-milbeaut/Makefile | 3 + arch/arm/mach-milbeaut/m10v_evb.c | 31 + arch/arm/mach-milbeaut/platsmp.c | 157 +++++ drivers/clk/Makefile | 1 + drivers/clk/clk-m10v.c | 671 ++++++++++++++++++ drivers/clocksource/Kconfig | 8 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-m10v.c | 146 ++++ drivers/pinctrl/Kconfig | 9 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-m10v.c | 765 +++++++++++++++++++++ drivers/tty/serial/Kconfig | 24 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/m10v_usio.c | 605 ++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 31 files changed, 3606 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/milbeaut-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,m10v.txt create mode 100644 Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dts create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dtsi create mode 100644 arch/arm/boot/dts/milbeaut-m10v.dtsi create mode 100644 arch/arm/configs/milbeaut_m10v_defconfig create mode 100644 arch/arm/include/debug/milbeaut.S create mode 100644 arch/arm/mach-milbeaut/Kconfig create mode 100644 arch/arm/mach-milbeaut/Makefile create mode 100644 arch/arm/mach-milbeaut/m10v_evb.c create mode 100644 arch/arm/mach-milbeaut/platsmp.c create mode 100644 drivers/clk/clk-m10v.c create mode 100644 drivers/clocksource/timer-m10v.c create mode 100644 drivers/pinctrl/pinctrl-m10v.c create mode 100644 drivers/tty/serial/m10v_usio.c -- 1.9.1
