From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Fix a few spelling mistakes I stumbled upon while debugging a customers UART issues. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> --- drivers/tty/serial/serial-tegra.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index af2a29cfbbe9..d5269aaaf9b2 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -746,7 +746,7 @@ static void tegra_uart_stop_rx(struct uart_port *u) if (!tup->rx_in_progress) return; - tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */ + tegra_uart_wait_sym_time(tup, 1); /* wait one character interval */ ier = tup->ier_shadow; ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | @@ -887,7 +887,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) * * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when * the DATA is sitting in the FIFO and couldn't be transferred to the - * DMA as the DMA size alignment(4 bytes) is not met. EORD will be + * DMA as the DMA size alignment (4 bytes) is not met. EORD will be * triggered when there is a pause of the incomming data stream for 4 * characters long. * @@ -1079,7 +1079,7 @@ static void tegra_uart_set_termios(struct uart_port *u, if (tup->rts_active) set_rts(tup, false); - /* Clear all interrupts as configuration is going to be change */ + /* Clear all interrupts as configuration is going to be changed */ tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER); tegra_uart_read(tup, UART_IER); tegra_uart_write(tup, 0, UART_IER); @@ -1165,10 +1165,10 @@ static void tegra_uart_set_termios(struct uart_port *u, /* update the port timeout based on new settings */ uart_update_timeout(u, termios->c_cflag, baud); - /* Make sure all write has completed */ + /* Make sure all writes have completed */ tegra_uart_read(tup, UART_IER); - /* Reenable interrupt */ + /* Re-enable interrupt */ tegra_uart_write(tup, tup->ier_shadow, UART_IER); tegra_uart_read(tup, UART_IER); -- 2.14.5
