On Thu, Nov 01, 2018 at 02:52:30AM +0100, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > > Fix a few spelling mistakes I stumbled upon while debugging a customers > UART issues. > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > > --- > > drivers/tty/serial/serial-tegra.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c > index af2a29cfbbe9..d5269aaaf9b2 100644 > --- a/drivers/tty/serial/serial-tegra.c > +++ b/drivers/tty/serial/serial-tegra.c > @@ -746,7 +746,7 @@ static void tegra_uart_stop_rx(struct uart_port *u) > if (!tup->rx_in_progress) > return; > > - tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */ > + tegra_uart_wait_sym_time(tup, 1); /* wait one character interval */ > > ier = tup->ier_shadow; > ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | > @@ -887,7 +887,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) > * > * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when > * the DATA is sitting in the FIFO and couldn't be transferred to the > - * DMA as the DMA size alignment(4 bytes) is not met. EORD will be > + * DMA as the DMA size alignment (4 bytes) is not met. EORD will be > * triggered when there is a pause of the incomming data stream for 4 > * characters long. > * > @@ -1079,7 +1079,7 @@ static void tegra_uart_set_termios(struct uart_port *u, > if (tup->rts_active) > set_rts(tup, false); > > - /* Clear all interrupts as configuration is going to be change */ > + /* Clear all interrupts as configuration is going to be changed */ > tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER); > tegra_uart_read(tup, UART_IER); > tegra_uart_write(tup, 0, UART_IER); > @@ -1165,10 +1165,10 @@ static void tegra_uart_set_termios(struct uart_port *u, > /* update the port timeout based on new settings */ > uart_update_timeout(u, termios->c_cflag, baud); > > - /* Make sure all write has completed */ > + /* Make sure all writes have completed */ > tegra_uart_read(tup, UART_IER); > > - /* Reenable interrupt */ > + /* Re-enable interrupt */ I think both forms are valid. Either way: Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Attachment:
signature.asc
Description: PGP signature
