RE: [PATCH 12/14] ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob

Thank you for your comments.

> -----Original Message-----
> From: Rob Herring [mailto:robh+dt@xxxxxxxxxx]
> Sent: Tuesday, November 20, 2018 12:46 AM
> To: Sugaya, Taichi; ARM-SoC Maintainers
> Cc: linux-clk; devicetree@xxxxxxxxxxxxxxx; moderated list:ARM/FREESCALE
> IMX / MXC ARM ARCHITECTURE; linux-kernel@xxxxxxxxxxxxxxx; open list:SERIAL
> DRIVERS; Michael Turquette; Stephen Boyd; Mark Rutland; Greg Kroah-Hartman;
> Daniel Lezcano; Thomas Gleixner; Russell King; Jiri Slaby; Masami Hiramatsu;
> Jassi Brar
> Subject: Re: [PATCH 12/14] ARM: dts: milbeaut: Add device tree set for the
> Milbeaut M10V board
> 
> On Sun, Nov 18, 2018 at 7:01 PM Sugaya Taichi
> <sugaya.taichi@xxxxxxxxxxxxx> wrote:
> >
> > Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.
> >
> > Signed-off-by: Sugaya Taichi <sugaya.taichi@xxxxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/Makefile               |   1 +
> >  arch/arm/boot/dts/milbeaut-m10v-evb.dts  |  35 +++
> >  arch/arm/boot/dts/milbeaut-m10v-evb.dtsi |  17 ++
> >  arch/arm/boot/dts/milbeaut-m10v.dtsi     | 510
> +++++++++++++++++++++++++++++++
> 
> I'm not seeing why you need this split into 3 files instead of 2.
Correct...
Modify using 2 files.

> 
> >  4 files changed, 563 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dts
> >  create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dtsi
> >  create mode 100644 arch/arm/boot/dts/milbeaut-m10v.dtsi
> 
> Build your dtb with 'W=12' and fix any warnings.
Ah, I may have missed warnings. will confirm and fix them.

> 
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index b0e966d..ee6220b 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1207,6 +1207,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
> >         mt7623n-bananapi-bpi-r2.dtb \
> >         mt8127-moose.dtb \
> >         mt8135-evbp1.dtb
> > +dtb-$(CONFIG_MACH_M10V_EVB) += milbeaut-m10v-evb.dtb
> 
> ARM SoC maintainers,
> 
> Can we start at least start putting new SoCs in vendor subdirs? This
> one doesn't appear to share anything.
> 
> >  dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> >  dtb-$(CONFIG_ARCH_ASPEED) += \
> >         aspeed-ast2500-evb.dtb \
> > diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dts
> b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
> > new file mode 100644
> > index 0000000..af8d6e4
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
> > @@ -0,0 +1,35 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/* Socionext Milbeaut M10V Evaluation Board */
> > +/dts-v1/;
> > +#include "milbeaut-m10v-evb.dtsi"
> > +
> > +/ {
> > +       cpus {
> 
> cpus is not board specific.
Yes..
Cpus Should be described in "milbeaut-m10v-evb.dtsi".

> 
> > +               cpu@0 {
> 
> Unit-address is wrong. Should be '@f00' to match reg.
Ok.

> 
> > +                       device_type = "cpu";
> > +                       compatible = "arm,cortex-a7";
> > +                       reg = <0xf00>;
> > +               };
> > +               cpu@1 {
> > +                       device_type = "cpu";
> > +                       compatible = "arm,cortex-a7";
> > +                       reg = <0xf01>;
> > +               };
> > +
> > +               cpu@2 {
> > +                       device_type = "cpu";
> > +                       compatible = "arm,cortex-a7";
> > +                       reg = <0xf02>;
> > +               };
> > +               cpu@3 {
> > +                       device_type = "cpu";
> > +                       compatible = "arm,cortex-a7";
> > +                       reg = <0xf03>;
> > +               };
> > +
> > +       };
> > +       trampoline: trampoline@0x0000F100 {
> 
> Also, not board specific.
> 
> This should be under a simple-bus node. The unit-address should be '@f100'.
> 
> > +               compatible = "socionext,smp-trampoline";
> > +               reg = <0x0000F100 0x100>;
> 
> Use lowercase hex.
OKay.

> 
> > +       };
> > +};
> > diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dtsi
> b/arch/arm/boot/dts/milbeaut-m10v-evb.dtsi
> > new file mode 100644
> > index 0000000..fc35c0b
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/milbeaut-m10v-evb.dtsi
> > @@ -0,0 +1,17 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include "milbeaut-m10v.dtsi"
> > +
> > +/ {
> > +       model = "Socionext M10V EVB";
> > +       compatible = "socionext,sc2000a",
> "socionext,milbeaut-m10v-evb";
> 
> Wrong order. And these need to be documented.
I got it.

> 
> > +       interrupt-parent = <&gic>;
> > +       chosen {
> > +               bootargs = "consoleblank=0 loglevel=8 init=/sbin/finit
> root=/dev/mmcblk0p2 rootwait ro console=ttyUSI0,115200n8
> console=/dev/tty1 ";
> 
> Most of these options look user specific and should be dropped. Use
> 'stdout-path' to specify the default console.
OK, try to use it.

> 
> > +               linux,initrd-start = <0x4A000000>;
> > +               linux,initrd-end =   <0x4BF00000>;
> 
> initrd should be filled in by the bootloader.
OK.

> 
> > +       };
> > +       memory {
> 
> Needs a unit-address.
OK.

> 
> > +               device_type = "memory";
> > +               reg = <0x40000000  0x80000000>;
> > +       };
> > +};
> > diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi
> b/arch/arm/boot/dts/milbeaut-m10v.dtsi
> > new file mode 100644
> > index 0000000..4745dc6
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/milbeaut-m10v.dtsi
> > @@ -0,0 +1,510 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +#include "skeleton.dtsi"
> 
> Don't use skeleton.dtsi. It is deprecated.
I got it. Get rid of it.

> 
> > +
> > +/ {
> > +       compatible = "socionext,sc2000a";
> > +       interrupt-parent = <&gic>;
> > +       cpus {
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +       };
> 
> Just move this to the other file with the cpu nodes.
I see.
I'd like to select the way to move the cpu nodes to this file.

> 
> > +
> > +
> > +       gic: interrupt-controller@1d000000 {
> > +               compatible = "arm,cortex-a7-gic";
> > +               interrupt-controller;
> > +               #interrupt-cells = <3>;
> > +               reg = <0x1d001000 0x1000>, /* Distributer base and size
> */
> > +                     <0x1d002000 0x1000>; /* CPU I/f base and size */
> > +       };
> > +
> > +       m10v-clk-tree@ {
> 
> unit-address
OK, add it.

> 
> > +               compatible = "socionext,milbeaut-m10v-clk-regs";
> > +               reg = <0x1d021000 0x4000>;
> > +
> > +               clocks {
> > +                       #address-cells = <0>;
> > +                       #size-cells = <0>;
> > +
> > +                       uclk40xi: uclk40xi {
> > +                               compatible = "fixed-clock";
> > +                               #clock-cells = <0>;
> > +                               clock-frequency = <40000000>;
> > +                       };
> 
> Any fixed clocks from oscillators on the board should be at the top
> level and defined as inputs to the clock controller node with a
> 'clocks' property.
OK.

> 
> > +
> > +                       aumclki: aumclki {
> > +                               compatible = "fixed-clock";
> > +                               #clock-cells = <0>;
> > +                               clock-frequency = <20000000>;
> > +                       };
> > +
> > +                       rtc32k: rtc32k {
> > +                               compatible = "fixed-clock";
> > +                               #clock-cells = <0>;
> > +                               clock-frequency = <32768>;
> > +                       };
> > +
> > +                       pxrefclk: pxrefclk {
> > +                               compatible = "fixed-clock";
> > +                               #clock-cells = <0>;
> > +                               clock-frequency = <100000000>;
> > +                       };
> > +
> > +                       pcisuppclk: pcisuppclk {
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               clock-div = <20>;
> > +                               clock-mult = <1>;
> > +                       };
> 
> Please look at any recent example of clock bindings. We don't try to
> describe every divider, mux, gate, etc. in DT, but just clock
> controller blocks with all the output clocks enumerated in clock
> cells.
OK, study them at first.

> 
> > +
> > +                       usb2_clk: usb2_clk {
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll1: pll1 {
> > +                               compatible =
> > +
> "socionext,milbeaut-m10v-pll-fixed-factor";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               offset = <1>;
> > +                               clock-div = <1>;
> > +                               clock-mult = <40>;
> > +                       };
> > +
> > +                       pll2: pll2 {
> > +                               compatible =
> > +
> "socionext,milbeaut-m10v-pll-fixed-factor";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               offset = <2>;
> > +                               clock-div = <1>;
> > +                               clock-mult = <30>;
> > +                       };
> > +
> > +                       pll6: pll6 { /* CLK 6-1 */
> > +                               compatible =
> > +
> "socionext,milbeaut-m10v-pll-fixed-factor";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               offset = <7>;
> > +                               clock-div = <1>;
> > +                               clock-mult = <35>;
> > +                       };
> > +
> > +                       pll7: pll7 { /* CLK 7-1 */
> > +                               compatible =
> > +
> "socionext,milbeaut-m10v-pll-fixed-factor";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               offset = <8>;
> > +                               clock-div = <1>;
> > +                               clock-mult = <40>;
> > +                       };
> > +
> > +                       pll9: pll9 { /* CA7CLK, ATCLK */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               clock-div = <1>;
> > +                               clock-mult = <33>;
> > +                       };
> > +
> > +                       pll10: pll10 {
> > +                               compatible =
> > +
> "socionext,milbeaut-m10v-pll-fixed-factor";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               offset = <10>;
> > +                               clock-div = <5>;
> > +                               clock-mult = <108>;
> > +                       };
> > +
> > +                       pll11: pll11 { /* CLK 11-1 */
> > +                               compatible =
> > +
> "socionext,milbeaut-m10v-pll-fixed-factor";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uclk40xi>;
> > +                               offset = <12>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <75>;
> > +                       };
> > +
> > +                       emmcclk: emmcclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll11>;
> > +                               offset = <28>; /* EMMCCLK */
> > +                               mask = <0x3>;
> > +                               ratios = <15 0x7 10 0x6 9 0x5 8 0x4>;
> > +                       };
> > +
> > +                       pll1_div_1_2: pll1_div_1_2 { /* CLK 1-2 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll2_div_1_2: pll2_div_1_2 { /* CLK 2-2 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll2>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll6_div_1_2: pll6_div_1_2 { /* CLK 6-2 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll6>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll6_div_1_3: pll6_div_1_3 { /* CLK 6-3 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll6>;
> > +                               clock-div = <3>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll7_div_1_2: pll7_div_1_2 { /* CLK 7-2 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll7_div_1_5: pll7_div_1_5 { /* CLK 7-5 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7>;
> > +                               clock-div = <5>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll10_div_1_2: pll10_div_1_2 { /* CLK 10-2 */
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll10>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       spiclk_mux_0: spiclk_mux_0 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll10_div_1_2>;
> > +                               offset = <227>; /* SPICLK */
> > +                               mask = <0x3>;
> > +                               ratios = <4 0x5 2 0x4>;
> > +                       };
> > +
> > +                       spiclk_mux_1: spiclk_mux_1 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7_div_1_2>;
> > +                               offset = <227>; /* SPICLK */
> > +                               mask = <0x3>;
> > +                               ratios = <8 0x6>;
> > +                       };
> > +
> > +                       spiclk: spiclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-mux";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&spiclk_mux_0>,
> <&spiclk_mux_1>;
> > +                       };
> > +
> > +                       ca7wdclk: ca7wdclk {
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll2_div_1_2>;
> > +                               clock-div = <12>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       pll9_div_1_2: pll9_div_1_2 {
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll9>;
> > +                               clock-div = <2>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       mclk400: mclk400 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <295>; /* MCLK400 */
> > +                               mask = <0x3>;
> > +                               ratios = <4 0x7 2 0x5>;
> > +                       };
> > +
> > +                       mclk200: mclk200 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <291>; /* MCLK200 */
> > +                               mask = <0x7>;
> > +                               ratios = <8 0xf 4 0xb>;
> > +                       };
> > +
> > +                       aclk400: aclk400 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <288>; /* ACLK400 */
> > +                               mask = <0x3>;
> > +                               ratios = <4 0x7 2 0x5>;
> > +                       };
> > +
> > +                       aclk300: aclk300 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll2_div_1_2>;
> > +                               offset = <352>; /* ACLK300 */
> > +                               mask = <0x1>;
> > +                               ratios = <6 0x3 4 0x2>;
> > +                       };
> > +
> > +                       aclk: aclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <276>; /* ACLK */
> > +                               mask = <0x7>;
> > +                               ratios = <8 0xf 4 0xb>;
> > +                       };
> > +
> > +                       aclkexs: aclkexs {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <272>; /* ACLKEXS */
> > +                               mask = <0x7>;
> > +                               ratios = <8 0xf 6 0xd 5 0xc 4 0xb>;
> > +                       };
> > +
> > +                       hclk: hclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <263>; /* HCLK */
> > +                               mask = <0xf>;
> > +                               ratios = <16 0x1f 8 0x17>;
> > +                       };
> > +
> > +                       hclkbmh: hclkbmh {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <268>; /* HCLKBMH */
> > +                               mask = <0x7>;
> > +                               ratios = <8 0xf 4 0xb>;
> > +                       };
> > +
> > +                       pclk: pclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               offset = <256>; /* PCLK */
> > +                               mask = <0x3f>;
> > +                               ratios = <32 0x5f 16 0x4f>;
> > +                       };
> > +
> > +                       pclkca7wd: pclkca7wd {
> > +                               compatible = "fixed-factor-clock";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll1_div_1_2>;
> > +                               clock-div = <16>;
> > +                               clock-mult = <1>;
> > +                       };
> > +
> > +                       rclk: rclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll10_div_1_2>;
> > +                               offset = <0>; /* RCLK */
> > +                               mask = <0x3>;
> > +                               ratios = <64 0x7 48 0x6 32 0x5 16 0x4>;
> > +                       };
> > +
> > +                       uhs1clk0: uhs1clk0 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7>;
> > +                               offset = <3>; /* UHS1CLK0 */
> > +                               mask = <0xf>;
> > +                               ratios = <16 0x14 8 0x13 4 0x12 3 0x11
> 2 0x10>;
> > +                       };
> > +
> > +                       uhs1clk1_div1: uhs1clk1_div1 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7>;
> > +                               offset = <8>; /* UHS1CLK1 */
> > +                               mask = <0xf>;
> > +                               ratios = <16 0x14 8 0x13>;
> > +                       };
> > +
> > +                       uhs1clk1_div2: uhs1clk1_div2 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll6_div_1_2>;
> > +                               offset = <8>; /* UHS1CLK1 */
> > +                               mask = <0xf>;
> > +                               ratios = <1 0x18>;
> > +                       };
> > +
> > +                       uhs1clk1: uhs1clk1 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-mux";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uhs1clk1_div1>,
> <&uhs1clk1_div2>;
> > +                       };
> > +
> > +                       uhs1clk2_div1: uhs1clk2_div1 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7>;
> > +                               offset = <13>; /* UHS1CLK2 */
> > +                               mask = <0xf>;
> > +                               ratios = <16 0x14 8 0x13 4 0x12>;
> > +                       };
> > +
> > +                       uhs1clk2_div2: uhs1clk2_div2 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll6_div_1_2>;
> > +                               offset = <13>; /* UHS1CLK2 */
> > +                               mask = <0xf>;
> > +                               ratios = <1 0x18>;
> > +                       };
> > +
> > +                       uhs1clk2: uhs1clk2 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-mux";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&uhs1clk2_div1>,
> <&uhs1clk2_div2>;
> > +                       };
> > +
> > +                       uhs2clk: uhs2clk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll6_div_1_3>;
> > +                               offset = <18>; /* UHS2CLK */
> > +                               mask = <0x7>;
> > +                               ratios = <18 0xf 16 0xe 14 0xd 13 0xc
> > +                                               12 0xb 11 0xa 10 0x9 9
> 0x8>;
> > +                       };
> > +
> > +                       nfclk_div1: nfclk_div1 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7_div_1_2>;
> > +                               offset = <22>; /* NFCLK */
> > +                               mask = <0x1f>;
> > +                               ratios = <40 0x24 16 0x23 13 0x22 10 0x21
> > +                                               8 0x20>;
> > +                       };
> > +
> > +                       nfclk_div2: nfclk_div2 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll7_div_1_5>;
> > +                               offset = <22>; /* NFCLK */
> > +                               mask = <0x1f>;
> > +                               ratios = <10 0x28>;
> > +                       };
> > +
> > +                       nfclk: nfclk {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-mux";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&nfclk_div1>, <&nfclk_div2>;
> > +                       };
> > +
> > +                       clk5: clk5 {
> > +                               compatible =
> "socionext,milbeaut-m10v-clk-div";
> > +                               #clock-cells = <0>;
> > +                               clocks = <&pll10_div_1_2>;
> > +                               offset = <239>; /* NETAUSEL */
> > +                               mask = <0x3>;
> > +                               ratios = <64 0x7 48 0x6 32 0x5 16 0x4>;
> > +                       };
> > +               };
> > +       };
> > +
> > +       peri-timer@1e000000 { /* 32-bit Reload Timers */
> 
> timer@1e000050
> 
> This and all memory mapped peripherals go under simple-bus nodes(s).
Okay.

> 
> > +               compatible = "socionext,milbeaut-m10v-timer";
> > +               reg = <0x1e000050 0x10>, <0x1e000060 0x10>;
> > +               interrupts = <0 91 4>;
> > +               clocks = <&rclk>;
> > +       };
> > +
> > +       timer { /* The Generic Timer */
> > +               compatible = "arm,armv7-timer";
> > +               interrupts = <GIC_PPI 13
> > +                               (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>,
> > +                       <GIC_PPI 14
> > +                               (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>,
> > +                       <GIC_PPI 11
> > +                               (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>,
> > +                       <GIC_PPI 10
> > +                               (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>;
> > +               clock-frequency = <40000000>;//40M
> > +               always-on;
> > +               arm,cpu-registers-not-fw-configured;
> 
> This was a work-around for some existing platforms. New platforms
> should fix the firmware/bootloader.
OK. try to fix without the property.

> 
> > +       };
> > +
> > +       dummy_clk: dummy_clk {
> > +               compatible = "fixed-clock";
> > +               #clock-cells = <0>;
> > +               clock-frequency = <50000000>;
> > +       };
> > +
> > +       pinctrl: pinctrl@1d022000 {
> > +               compatible = "socionext,milbeaut-m10v-pinctrl";
> > +               reg = <0x1d022000 0x1000>,
> > +                     <0x1c26f000 0x1000>;
> > +               reg-names = "pinctrl", "exiu";
> > +               gpio-controller;
> > +               #gpio-cells = <2>;
> > +               interrupt-controller;
> > +               #interrupt-cells = <2>;
> > +               clocks = <&dummy_clk>;
> 
> Please use a real clock or make clocks optional.
OK.

> 
> > +               interrupts = <0 54 4>, <0 55 4>, <0 56 4>, <0 57 4>,
> > +                               <0 58 4>, <0 59 4>, <0 60 4>, <0 61 4>,
> > +                               <0 62 4>, <0 63 4>, <0 64 4>, <0 65 4>,
> > +                               <0 66 4>, <0 67 4>, <0 68 4>, <0 69 4>;
> > +               interrupt-names = "pin-48", "pin-49", "pin-50",
> "pin-51",
> > +                               "pin-52", "pin-53", "pin-54", "pin-55",
> > +                               "pin-56", "pin-57", "pin-58", "pin-59",
> > +                               "pin-60", "pin-61", "pin-62", "pin-63";
> > +
> > +               usio1_pins: usio1_pins {
> > +                       pins = "PE4", "PE5", "P87";
> > +                       function = "usio1";
> > +               };
> > +       };
> > +
> > +       usio1: usio_uart@1e700010 { /* PE4, PE5 */
> 
> serial@...
OK.

> 
> > +               /* Enable this as ttyUSI0 */
> > +               index = <0>;
> 
> Drop this. aliases node is the right way to do this.
I see. try to use the way.

Thanks
Sugaya Taichi

> 
> > +               compatible = "socionext,milbeaut-m10v-usio-uart";
> > +               reg = <0x1e700010 0x10>;
> > +               interrupts = <0 141 0x4>, <0 149 0x4>;
> > +               interrupt-names = "rx", "tx";
> > +               clocks = <&hclk>;
> > +       };
> > +};
> > --
> > 1.9.1
> >




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux