On Fri, Nov 09, 2018 at 08:59:51AM -0800, Greg Kroah-Hartman wrote: > On Thu, Oct 18, 2018 at 04:43:54PM -0700, Paul Walmsley wrote: > > Add a serial driver for the SiFive UART, found on SiFive FU540 devices > > (among others). > > > > The underlying serial IP block is relatively basic, and currently does > > not support serial break detection. Further information on the IP > > block can be found in the documentation and Chisel sources: > > > > https://static.dev.sifive.com/FU540-C000-v1.0.pdf > > > > https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart > > > > This driver was written in collaboration with Wesley Terpstra > > <wesley@xxxxxxxxxx>. > > > > Boot-tested on a SiFive HiFive Unleashed A00 board. > > > > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > Cc: Jiri Slaby <jslaby@xxxxxxxx> > > Cc: Palmer Dabbelt <palmer@xxxxxxxxxx> > > Cc: Wesley Terpstra <wesley@xxxxxxxxxx> > > Cc: linux-serial@xxxxxxxxxxxxxxx > > Cc: linux-riscv@xxxxxxxxxxxxxxxxxxx > > Cc: linux-kernel@xxxxxxxxxxxxxxx > > Signed-off-by: Paul Walmsley <paul.walmsley@xxxxxxxxxx> > > Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> > > --- > > drivers/tty/serial/Kconfig | 24 + > > drivers/tty/serial/Makefile | 1 + > > drivers/tty/serial/sifive.c | 1070 ++++++++++++++++++++++++++++++ > > include/uapi/linux/serial_core.h | 3 + > > 4 files changed, 1098 insertions(+) > > create mode 100644 drivers/tty/serial/sifive.c > > Seems like the 0-day bot did not like this driver, can you fix up those > build errors and resend? Nevermind, you did, sorry about that...
