Linux Serial
[Prev Page][Next Page]
- Re: [GIT PULL] TTY/Serial fixes for 5.0-rc4
- [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq
- [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation
- [PATCH 0/2] serial: mps2-uart: minor improvements
- [GIT PULL] TTY/Serial fixes for 5.0-rc4
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- [PATCH v1 2/2] serial: 8250_pci: Replace custom code with pci_match_id()
- [PATCH v1 1/2] serial: 8250_pci: Make PCI class test non fatal
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH 0/3] serdev support for n_gsm
- [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH v6 4/6] dt-bindings: serial: Add compatible for Mediatek MT8183
- [PATCH v6 3/6] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
- [PATCH v6 5/6] dt-bindings: pinctrl: mt8183: add binding document
- [PATCH v6 2/6] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
- [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- [PATCH v6 0/6] Add basic and clock support for Mediatek MT8183 SoC
- [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- [PATCH v4 2/2] serial: Add Tegra Combined UART driver
- [PATCH v4 1/2] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
- [PATCH v4 0/2] serial: Add Tegra Combined UART driver
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- Re: [PATCH 6/6] arm64: dts: sdm845: Add interconnect for GENI QUP
- Re: [PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 0/6] Add interconnect support for GENI QUPs
- [PATCH v2] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH 4/4] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH] tty: serial: lpc32xx_hs: fix missing console boot messages
- [PATCH] tty: serial: 8250_mtk: Fix potential NULL pointer dereference
- From: Gustavo A. R. Silva
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 02/14] dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
- From: Russell King - ARM Linux admin
- Re: [PATCH 02/14] dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
- [PATCH v2] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 4/4] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH v2] serial: core: Fix race between freeing and writing to transmit buffer
- [PATCH 6/6] arm64: dts: sdm845: Add interconnect for GENI QUP
- [PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support
- [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- [PATCH 0/6] Add interconnect support for GENI QUPs
- Re: [PATCH] tty: ldisc: add sysctl to prevent autoloading of ldiscs
- Re: [PATCH] dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
- Re: [PATCH 2/3] dt-bindings: serial: omap_serial: add clocks entry
- Re: [PATCH 0/3] serdev support for n_gsm
- [PATCH] tty: ldisc: add sysctl to prevent autoloading of ldiscs
- Re: [BUG] tiocsti() NULL dereference if ld->ops->receive_buf==NULL
- Re: [BUG] tiocsti() NULL dereference if ld->ops->receive_buf==NULL
- Re: [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- Re: [PATCH v10 3/3] dt-bindings: dma: uart: rename binding
- [PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support
- Re: [PATCH 0/3] serdev support for n_gsm
- [PATCH 2/4] serial: fsl_lpuart: specify transmit FIFO size for 32-bit variant
- [PATCH 1/4] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH 3/4] serial: fsl_lpuart: consider TX FIFO too in lpuart32_tx_empty
- Re: [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- [PATCH 4/4] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [BUG] tiocsti() NULL dereference if ld->ops->receive_buf==NULL
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7779: add HSCIF0/1 pins
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7779: add HSCIF0/1 pins
- Re: [PATCH] serial: 8250: Fix serial8250 initialization crash
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- [PATCH 1/2] pinctrl: sh-pfc: r8a7779: add HSCIF0/1 pins
- [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- [PATCH 0/2] ARM: shmobile: r8a7779: HSCIF support
- [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v10 2/3] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v10 0/3] add uart DMA function
- [PATCH v10 3/3] dt-bindings: dma: uart: rename binding
- Re: [PATCH] serial: 8250: Fix serial8250 initialization crash
- Re: [PATCH] serial: 8250: Fix serial8250 initialization crash
- [PATCH] serial: 8250: Fix serial8250 initialization crash
- Re: [PATCH] uart: Fix crash in uart_write and uart_put_char
- [PATCH] uart: Fix crash in uart_write and uart_put_char
- [PATCH] tty: serial: lpc32xx_hs: fix missing console boot messages
- Re: [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- Re: [PATCH v2] 8250_pci.c: Update NI specific devices class to multi serial
- [PATCH v2] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH] tty: serial: meson: if no alias specified use an available id
- Re: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH v2 2/2] dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
- [PATCH v2 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH] tty: serial: meson: if no alias specified use an available id
- Re: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH 2/2] dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
- Re: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- Re: [PATCH] tty: not call tty close in fallback
- Re: [PATCH] tty: not call tty close in fallback
- [PATCH] tty: not call tty close in fallback
- [PATCH 3/3] tty: n_gsm: Add support for serdev drivers
- [PATCH 2/3] n_gsm: Constify u8 and unsigned char usage
- [PATCH 1/3] tty: n_gsm: Add copy_config() and gsm_config() to prepare for serdev
- [PATCH 0/3] serdev support for n_gsm
- Re: Hilscher NetX mach-netx refactorings
- Re: [GIT PULL] TTY/Serial fixes for 5.0-rc2
- [GIT PULL] TTY/Serial fixes for 5.0-rc2
- Re: [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- [PATCH v2] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- Re:[PATCH] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- [PATCH][V2][resend] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH 2/2] dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
- [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH] dt-bindings: serial: Convert arm,pl011 to json-schema
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- Re: [PATCH 3/4] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- [PATCH] dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- [bug report] serial: 8250: Rate limit serial port rx interrupts during input overruns
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v5 4/4] serial: sh-sci: Make RX/TX DMA function names consistent
- Re: [PATCH v5 2/4] serial: sh-sci: Extract sci_dma_rx_reenable_irq()
- Re: [PATCH v5 3/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- Re: [PATCH v5 1/4] serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
- [PATCH 0/3] 8250_omap: use clk APIs to get fclk freqeuncy
- [PATCH 2/3] dt-bindings: serial: omap_serial: add clocks entry
- [PATCH 3/3] serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency
- [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: Serial device with PCI class memory device (0x05)
- [PATCH AUTOSEL 4.20 014/117] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.20 077/117] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.19 12/97] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.19 62/97] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.14 05/53] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.14 33/53] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.9 04/36] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.9 23/36] tty/serial: do not free trasnmit buffer page under port lock
- Re: [PATCH v5 4/4] serial: sh-sci: Make RX/TX DMA function names consistent
- Re: [PATCH v5 3/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- Re: [PATCH v5 2/4] serial: sh-sci: Extract sci_dma_rx_reenable_irq()
- Re: [PATCH v5 1/4] serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
- Re: Serial device with PCI class memory device (0x05)
- Re: Serial device with PCI class memory device (0x05)
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- [PATCH v2 1/4] tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
- [PATCH v2 2/4] tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
- [PATCH v2 3/4] tty: serial: qcom_geni_serial: Remove xfer_mode variable
- [PATCH v2 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- [PATCH v2 0/4] tty: serial: qcom_geni_serial: Assorted cleanups
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- [PATCH v5 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- [PATCH v5 4/4] serial: sh-sci: Make RX/TX DMA function names consistent
- [PATCH v5 1/4] serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
- [PATCH v5 3/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- [PATCH v5 2/4] serial: sh-sci: Extract sci_dma_rx_reenable_irq()
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- Re: [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- Re: [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support
- [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- Re: [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support
- [PATCH 4.20 001/145] panic: avoid deadlocks in re-entrant console drivers
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: Serial device with PCI class memory device (0x05)
- Re: Serial device with PCI class memory device (0x05)
- Re: Serial device with PCI class memory device (0x05)
- Re: [BUG] tty: serial: mxs-auart: possible concurrency use-after-free bugs in mxs_auart_dma_exit_channel()
- Serial device with PCI class memory device (0x05)
- Re: [BUG] tty: serial: mxs-auart: possible concurrency use-after-free bugs in mxs_auart_dma_exit_channel()
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH] serial: lantiq: Do not swap register read/writes
- [PATCH] serial: lantiq: Do not swap register read/writes
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- [PATCH] serial: max310x: Use struct_size() in devm_kzalloc()
- From: Gustavo A. R. Silva
- Re: [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- Re: [PATCH 3/4] tty: serial: qcom_geni_serial: Remove xfer_mode variable
- Re: [PATCH 2/4] tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
- Re: [PATCH 1/4] tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
- [PATCH] sc16is7xx: Use struct_size() in devm_kzalloc()
- From: Gustavo A. R. Silva
- Re: pty for real device ?
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- Re: pty for real device ?
- [PATCH RFC lora-next 0/5] net: lora: sx130x: USB CDC Picocell Gateway serdev driver via fake DT nodes
- [PATCH lora-next 2/5] net: lora: sx130x: Prepare storing driver-specific data
- [PATCH lora-next 1/5] net: lora: sx130x: Factor out SPI specific parts
- [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support
- [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- Re: pty for real device ?
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- pty for real device ?
- Re: [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- packet mode in pty
- Re: [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH 3/4] tty: serial: qcom_geni_serial: Remove xfer_mode variable
- [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- [PATCH 1/4] tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
- [PATCH 2/4] tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
- [PATCH 0/4] tty: serial: qcom_geni_serial: Assorted cleanups
- [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v9 2/2] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v9 0/2] add uart DMA function
- Re: [PATCH v7 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- From: Manivannan Sadhasivam
- Re: [PATCH v7 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- [PATCH v8 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v8 0/2] add uart DMA function
- [PATCH v8 2/2] arm: dts: mt2712: add uart APDMA to device tree
- Re: [GIT PULL] TTY/Serial patches for 4.21-rc1
- Re: [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- [GIT PULL] TTY/Serial patches for 4.21-rc1
- Re: [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH 4.19 30/46] panic: avoid deadlocks in re-entrant console drivers
- [PATCH 4.14 28/36] panic: avoid deadlocks in re-entrant console drivers
- [PATCH 4.9 20/22] panic: avoid deadlocks in re-entrant console drivers
- [PATCH v5 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- [PATCH v5 4/6] dt-bindings: serial: Add compatible for Mediatek MT8183
- [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH v5 3/6] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
- [PATCH v5 2/6] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
- [PATCH v5 0/6] Add basic and clock support for Mediatek MT8183 SoC
- Re: [PATCH 07/14] clock: milbeaut: Add Milbeaut M10V clock control
- Re: [PATCH 07/14] clock: milbeaut: Add Milbeaut M10V clock control
- [PATCH AUTOSEL 3.18 12/12] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.4 21/21] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.9 35/35] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.14 59/59] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.19 96/97] serial/sunsu: fix refcount leak
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH 07/14] clock: milbeaut: Add Milbeaut M10V clock control
- [PATCH] tty: pass return value of spi_register_driver
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v7 0/2] add uart DMA function
- [PATCH v7 2/2] arm: dts: mt2712: add uart APDMA to device tree
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- bug report: serial: 8250: Rate limit serial port rx interrupts during input overruns
- Re: [PATCH v3 00/12] serial: Add Tegra Combined UART driver
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] serial/sunsu: fix refcount leak
- Re: [PATCH] serial/sunsu: fix refcount leak
- Re: [PATCH v2 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH v2 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH] serial: clps711x: Remove board support
- Re: [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- Re: [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- Re: [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- Re: [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- Re: [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- Re: [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH] Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250"
- Re: [GIT PULL] TTY/Serial fixes for 4.20-rc8
- [GIT PULL] TTY/Serial fixes for 4.20-rc8
- Re: [PATCH v2 0/4] serial: uartps: Driver updates
- Re: [PATCH v2 0/4] serial: uartps: Driver updates
- [PATCH 1/2] serial: sccnxp: Adds a delay between sequential read/write cycles
- [PATCH 2/2] serial: sccnxp: Allow to use non-standard baud rates
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix UART hang
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix UART hang
- [PATCH] tty: serial: qcom_geni_serial: Fix UART hang
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v2 0/4] serial: uartps: Driver updates
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- [PATCH] serial: max310x: Fix tx_empty() callback
- Re: [PATCH v2 1/2] dt-bindings: serial: sh-sci: Document r8a774a1 bindings
- [PATCH v2 resend 2/2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- [PATCH v2 1/2] dt-bindings: serial: sh-sci: Document r8a774a1 bindings
- [PATCH v2 resend 0/2] RZ/G2[EM] SCIF and HSCIF documentation
- RE: [PATCH v2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH v2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH v6 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v6 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v6 2/2] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v6 0/2] add uart DMA function
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH v2 1/2] Bluetooth: hci_h5: Add suspend / resume ops
- Re: [PATCH v2 2/2] Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume
- Re: [PATCH v2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- [PATCH v7 11/11] MAINTAINERS: Add entry for RDA Micro SoC architecture
- From: Manivannan Sadhasivam
- [PATCH v7 10/11] tty: serial: Add RDA8810PL UART driver
- From: Manivannan Sadhasivam
- [PATCH v7 07/11] ARM: dts: rda8810pl: Add timer support
- From: Manivannan Sadhasivam
- [PATCH v7 09/11] ARM: dts: rda8810pl: Add interrupt support for UART
- From: Manivannan Sadhasivam
- [PATCH v7 08/11] dt-bindings: serial: Document RDA Micro UART
- From: Manivannan Sadhasivam
- [PATCH v7 06/11] ARM: dts: Add devicetree for OrangePi i96 board
- From: Manivannan Sadhasivam
- [PATCH v7 05/11] ARM: dts: Add devicetree for OrangePi 2G IoT board
- From: Manivannan Sadhasivam
- [PATCH v7 04/11] ARM: dts: Add devicetree for RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v7 03/11] ARM: Prepare RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v7 02/11] dt-bindings: arm: Document RDA8810PL and reference boards
- From: Manivannan Sadhasivam
- [PATCH v7 01/11] dt-bindings: Add RDA Micro vendor prefix
- From: Manivannan Sadhasivam
- [PATCH v7 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- From: Manivannan Sadhasivam
- Re: [PATCH v6 08/11] dt-bindings: serial: Document RDA Micro UART
- From: Manivannan Sadhasivam
- Re: [PATCH v6 08/11] dt-bindings: serial: Document RDA Micro UART
- Re: [PATCH v5 03/11] ARM: Prepare RDA8810PL SoC
- [PATCH v2 1/4] serial: uartps: Add the device_init_wakeup
- [PATCH v2 4/4] serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly
- [PATCH v2 3/4] serial: uartps: Fix error path when alloc failed
- [PATCH v2 2/4] serial: uartps: Check if the device is a console
- [PATCH v2 0/4] serial: uartps: Driver updates
- [PATCH v2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- [PATCH v6 11/11] MAINTAINERS: Add entry for RDA Micro SoC architecture
- From: Manivannan Sadhasivam
- [PATCH v6 10/11] tty: serial: Add RDA8810PL UART driver
- From: Manivannan Sadhasivam
- [PATCH v6 07/11] ARM: dts: rda8810pl: Add timer support
- From: Manivannan Sadhasivam
- [PATCH v6 09/11] ARM: dts: rda8810pl: Add interrupt support for UART
- From: Manivannan Sadhasivam
- [PATCH v6 08/11] dt-bindings: serial: Document RDA Micro UART
- From: Manivannan Sadhasivam
- [PATCH v6 06/11] ARM: dts: Add devicetree for OrangePi i96 board
- From: Manivannan Sadhasivam
- [PATCH v6 05/11] ARM: dts: Add devicetree for OrangePi 2G IoT board
- From: Manivannan Sadhasivam
- [PATCH v6 04/11] ARM: dts: Add devicetree for RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v6 03/11] ARM: Prepare RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v6 02/11] dt-bindings: arm: Document RDA8810PL and reference boards
- From: Manivannan Sadhasivam
- [PATCH v6 01/11] dt-bindings: Add RDA Micro vendor prefix
- From: Manivannan Sadhasivam
- [PATCH v6 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- From: Manivannan Sadhasivam
- [PATCH v5 11/11] MAINTAINERS: Add entry for RDA Micro SoC architecture
- From: Manivannan Sadhasivam
- [PATCH v5 10/11] tty: serial: Add RDA8810PL UART driver
- From: Manivannan Sadhasivam
- [PATCH v5 09/11] ARM: dts: rda8810pl: Add interrupt support for UART
- From: Manivannan Sadhasivam
- [PATCH v5 08/11] dt-bindings: serial: Document RDA Micro UART
- From: Manivannan Sadhasivam
- [PATCH v5 07/11] ARM: dts: rda8810pl: Add timer support
- From: Manivannan Sadhasivam
- [PATCH v5 06/11] ARM: dts: Add devicetree for OrangePi i96 board
- From: Manivannan Sadhasivam
- [PATCH v5 05/11] ARM: dts: Add devicetree for OrangePi 2G IoT board
- From: Manivannan Sadhasivam
- [PATCH v5 04/11] ARM: dts: Add devicetree for RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v5 03/11] ARM: Prepare RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v5 02/11] dt-bindings: arm: Document RDA8810PL and reference boards
- From: Manivannan Sadhasivam
- [PATCH v5 01/11] dt-bindings: Add RDA Micro vendor prefix
- From: Manivannan Sadhasivam
- [PATCH v5 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- From: Manivannan Sadhasivam
- Re: [PATCH 4/4] arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
- From: Krzysztof Kozlowski
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] serial: uartps: Add the device_init_wakeup
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] serial: uartps: Add the device_init_wakeup
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] serial: uartps: Add the device_init_wakeup
- [PATCH V5 1/4] dt-bindings: serial: lpuart: add imx8qxp compatible string
- Re: [PATCH v4 2/4] serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
- Re: [PATCH v4 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- Re: [PATCH v4 4/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- Re: [PATCH v4 2/4] serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
- Re: [PATCH v4 3/4] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- Re: [PATCH v4 2/4] serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
- Re: [PATCH v4 1/4] serial: sh-sci: Fix locking in sci_submit_rx()
- Re: [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH v4 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- Re: [PATCH v4 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- Re: [PATCH v4 11/15] clocksource: Add clock driver for RDA8810PL SoC
- From: Manivannan Sadhasivam
- Re: [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH] serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH v4 3/4] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH 4/4] arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
- [PATCH 2/4] tty: serial: samsung: Properly set flags in autoCTS mode
- [PATCH 0/4] Samsung TM2(e): add Bluetooth support (resend)
- RE: [PATCH] serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH] serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH v2] tty: serial: qcom_geni_serial: Remove interrupt storm
- [PATCH] serial: sh-sci: Document r8a774c0 bindings
- [PATCH v2] tty: serial: qcom_geni_serial: Remove interrupt storm
- [PATCH v4 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- [PATCH v4 1/4] serial: sh-sci: Fix locking in sci_submit_rx()
- [PATCH v4 4/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- [PATCH v4 3/4] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH v4 2/4] serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH] tty: serial: qcom_geni_serial: Remove interrupt storm
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH] tty: serial: don't do termios for BTIF
- From: Russell King - ARM Linux
- Re: [PATCH] tty/serial: do not free trasnmit buffer page under port lock
- Re: [PATCH] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH] tty: serial: don't do termios for BTIF
- Re: [PATCH v5 2/2] arm: dts: mt2712: add uart APDMA to device tree
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- [PATCH] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.19 30/73] drivers/tty: add missing of_node_put()
- [PATCH AUTOSEL 4.14 15/41] drivers/tty: add missing of_node_put()
- [PATCH AUTOSEL 4.9 13/34] drivers/tty: add missing of_node_put()
- [PATCH AUTOSEL 4.4 12/23] drivers/tty: add missing of_node_put()
- [PATCH AUTOSEL 3.18 09/16] drivers/tty: add missing of_node_put()
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH] serial: 8250: Fix clearing FIFOs in RS485 mode again
- Re: [PATCH] serial/sunsu: fix refcount leak
- [PATCH] serial/sunsu: fix refcount leak
- Re: [PATCH v4 11/15] clocksource: Add clock driver for RDA8810PL SoC
- Re: [PATCH v4 11/15] clocksource: Add clock driver for RDA8810PL SoC
- From: Manivannan Sadhasivam
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCH v4 11/15] clocksource: Add clock driver for RDA8810PL SoC
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCH v4 15/15] MAINTAINERS: Add entry for RDA Micro SoC architecture
- From: Manivannan Sadhasivam
- Re: [PATCH v4 15/15] MAINTAINERS: Add entry for RDA Micro SoC architecture
- Re: [RFC][PATCHv2 3/4] serial: introduce uart_port locking helpers
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCHv3] panic: avoid deadlocks in re-entrant console drivers
- Re: [PATCHv3] panic: avoid deadlocks in re-entrant console drivers
- Re: [PATCHv3] panic: avoid deadlocks in re-entrant console drivers
- Re: [PATCHv3] panic: avoid deadlocks in re-entrant console drivers
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCHv3] panic: avoid deadlocks in re-entrant console drivers
- [PATCH] tty: serial: qcom_geni_serial: Remove interrupt storm
- Re: [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [LKP] [tty] c96cf923a9: WARNING:possible_circular_locking_dependency_detected
- Re: [PATCH v2 1/2] Bluetooth: hci_h5: Add suspend / resume ops
- Re: [PATCH v3 3/4] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH v5 0/2] add uart DMA function
- [PATCH v5 2/2] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v5 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH v3 1/2] dt-bindings: serial: 8250: Add rate limit for serial port input overruns
- Re: [PATCH v4 12/15] dt-bindings: serial: Document RDA Micro UART
- Re: [PATCH v4 09/15] dt-bindings: timer: Document RDA8810PL SoC timer
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- RE: "No irq handler for vector" problem
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v3 3/4] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH v3 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- [PATCH v3 2/4] serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
- [PATCH v3 4/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- [PATCH v3 3/4] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH v3 1/4] serial: sh-sci: Fix locking in sci_submit_rx()
- RE: "No irq handler for vector" problem
- [PATCH v4 15/15] MAINTAINERS: Add entry for RDA Micro SoC architecture
- From: Manivannan Sadhasivam
- [PATCH v4 14/15] tty: serial: Add RDA8810PL UART driver
- From: Manivannan Sadhasivam
- [PATCH v4 13/15] ARM: dts: rda8810pl: Add interrupt support for UART
- From: Manivannan Sadhasivam
- [PATCH v4 12/15] dt-bindings: serial: Document RDA Micro UART
- From: Manivannan Sadhasivam
- [PATCH v4 11/15] clocksource: Add clock driver for RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v4 08/15] irqchip: Add RDA8810PL interrupt driver
- From: Manivannan Sadhasivam
- [PATCH v4 10/15] ARM: dts: rda8810pl: Add timer support
- From: Manivannan Sadhasivam
- [PATCH v4 09/15] dt-bindings: timer: Document RDA8810PL SoC timer
- From: Manivannan Sadhasivam
- [PATCH v4 07/15] ARM: dts: Add devicetree for OrangePi i96 board
- From: Manivannan Sadhasivam
- [PATCH v4 06/15] ARM: dts: Add devicetree for OrangePi 2G IoT board
- From: Manivannan Sadhasivam
- [PATCH v4 05/15] ARM: dts: Add devicetree for RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v4 04/15] dt-bindings: interrupt-controller: Document RDA8810PL intc
- From: Manivannan Sadhasivam
- [PATCH v4 03/15] ARM: Prepare RDA8810PL SoC
- From: Manivannan Sadhasivam
- [PATCH v4 02/15] dt-bindings: arm: Document RDA8810PL and reference boards
- From: Manivannan Sadhasivam
- [PATCH v4 01/15] dt-bindings: Add RDA Micro vendor prefix
- From: Manivannan Sadhasivam
- [PATCH v4 00/15] Add initial RDA8810PL SoC and Orange Pi boards support
- From: Manivannan Sadhasivam
- Re: [PATCH v3 08/15] irqchip: Add RDA8810PL interrupt driver
- Re: [PATCH v4 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH v2 05/10] mailbox: tegra-hsp: Add suspend/resume support
- Re: [PATCH v3 08/15] irqchip: Add RDA8810PL interrupt driver
- From: Manivannan Sadhasivam
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v3 08/15] irqchip: Add RDA8810PL interrupt driver
- [resend PATCH v4 2/2] arm: dts: mt2712: add uart APDMA to device tree
- [resend PATCH v4 0/2] add uart DMA function
- [resend PATCH v4 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- [PATCH v4 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- [PATCH v4 2/2] arm: dts: mt2701: add uart APDMA to device tree
- [PATCH v4 0/2] add uart DMA function
- [PATCH v3 2/2] serial: 8250: Rate limit serial port rx interrupts during input overruns
- [PATCH v3 1/2] dt-bindings: serial: 8250: Add rate limit for serial port input overruns
- Re: [GIT PULL] TTY/Serial fixes for 4.20-rc6
- [GIT PULL] TTY/Serial fixes for 4.20-rc6
- Re: [PATCH v3 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [RFC][PATCHv2 3/4] serial: introduce uart_port locking helpers
- Re: [PATCH v3 12/15] dt-bindings: serial: Document RDA Micro UART
- Re: [PATCH v3 09/15] dt-bindings: timer: Document RDA8810PL SoC timer
- Re: [PATCH v3 04/15] dt-bindings: interrupt-controller: Document RDA8810PL intc
- Re: [PATCH v3 02/15] dt-bindings: arm: Document RDA8810PL and reference boards
- Re: [PATCH v3 01/15] dt-bindings: Add RDA Micro vendor prefix
- Re: [PATCH 1/3] tty/serial: Add RISC-V SBI earlycon support
- Re: [PATCH 3/3] RISC-V: Remove EARLY_PRINTK support
- Re: [PATCH 0/3] RISC-V SBI earlycon
- Re: [PATCH 2/3] RISC-V: defconfig: Enable RISC-V SBI earlycon support
- Re: [PATCH 1/3] tty/serial: Add RISC-V SBI earlycon support
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- [PATCH v3 1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
- [PATCH v3 2/2] arm: dts: mt2701: add uart APDMA to device tree
- [PATCH v3 0/2] add uart DMA function
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v2 01/10] mailbox: Support blocking transfers in atomic context
- Re: [PATCH v2 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
- Re: [PATCH v2 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
- Re: [PATCH 10/14] dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]