Re: [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18-01-19, 11:10, Long Cheng wrote:
> +static enum dma_status mtk_uart_apdma_tx_status(struct dma_chan *chan,
> +					 dma_cookie_t cookie,
> +					 struct dma_tx_state *txstate)
> +{
> +	struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +	enum dma_status ret;
> +	unsigned long flags;
> +
> +	if (!txstate)
> +		return DMA_ERROR;

Why, it is not a mandatory arg!

> +	ret = dma_cookie_status(chan, cookie, txstate);
> +	spin_lock_irqsave(&c->vc.lock, flags);
> +	if (ret == DMA_IN_PROGRESS) {
> +		c->rx_status = mtk_uart_apdma_read(c, VFF_RPT) & VFF_RING_SIZE;
> +		dma_set_residue(txstate, c->rx_status);
> +	} else if (ret == DMA_COMPLETE && c->dir == DMA_DEV_TO_MEM) {
> +		dma_set_residue(txstate, c->rx_status);

what is the point is setting residue to comleted txn, it is zero!

> +	} else {
> +		dma_set_residue(txstate, 0);

naah that doesnt sound correct!

> +static void mtk_uart_apdma_config_write(struct dma_chan *chan,
> +			       struct dma_slave_config *cfg,
> +			       enum dma_transfer_direction dir)
> +{
> +	struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +	struct mtk_uart_apdmadev *mtkd =
> +				to_mtk_uart_apdma_dev(c->vc.chan.device);
> +	unsigned int tmp;
> +
> +	if (mtk_uart_apdma_read(c, VFF_EN) == VFF_EN_B)
> +		return;
> +
> +	c->dir = dir;
> +
> +	if (dir == DMA_DEV_TO_MEM) {
> +		tmp = cfg->src_addr_width * 1024;

why multiply by 1024?

> +static int mtk_uart_apdma_device_pause(struct dma_chan *chan)
> +{
> +	/* just for check caps pass */
> +	return 0;
> +}

please remove, this is not a mandatory fn
-- 
~Vinod



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux