Convert the arm,pl011 binding to DT schema using json-schema.
The zte,zx296702-uart binding appears to be broken as the dts files are
missing 'arm,primecell'. That's included in the schema here to throw a
warning.
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: linux-serial@xxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/serial/pl011.txt | 51 -------
.../devicetree/bindings/serial/pl011.yaml | 126 ++++++++++++++++++
2 files changed, 126 insertions(+), 51 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/pl011.txt
create mode 100644 Documentation/devicetree/bindings/serial/pl011.yaml
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
deleted file mode 100644
index 77863aefe9ef..000000000000
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* ARM AMBA Primecell PL011 serial UART
-
-Required properties:
-- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
-- reg: exactly one register range with length 0x1000
-- interrupts: exactly one interrupt specifier
-
-Optional properties:
-- pinctrl:
- When present, must have one state named "default",
- and may contain a second name named "sleep". The former
- state sets up pins for ordinary operation whereas
- the latter state will put the associated pins to sleep
- when the UART is unused
-- clocks:
- When present, the first clock listed must correspond to
- the clock named UARTCLK on the IP block, i.e. the clock
- to the external serial line, whereas the second clock
- must correspond to the PCLK clocking the internal logic
- of the block. Just listing one clock (the first one) is
- deprecated.
-- clock-names:
- When present, the first clock listed must be named
- "uartclk" and the second clock listed must be named
- "apb_pclk"
-- dmas:
- When present, may have one or two dma channels.
- The first one must be named "rx", the second one
- must be named "tx".
-- auto-poll:
- Enables polling when using RX DMA.
-- poll-rate-ms:
- Rate at which poll occurs when auto-poll is set,
- default 100ms.
-- poll-timeout-ms:
- Poll timeout when auto-poll is set, default
- 3000ms.
-
-See also bindings/arm/primecell.txt
-
-Example:
-
-uart@80120000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x80120000 0x1000>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
- dma-names = "rx", "tx";
- clocks = <&foo_clk>, <&bar_clk>;
- clock-names = "uartclk", "apb_pclk";
-};
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
new file mode 100644
index 000000000000..1a64d59152aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/pl011.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell PL011 serial UART
+
+maintainers:
+ - Rob Herring <robh@xxxxxxxxxx>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl011
+ - zte,zx296702-uart
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,pl011
+ - const: arm,primecell
+ - items:
+ - const: zte,zx296702-uart
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ description:
+ When present, must have one state named "default",
+ and may contain a second name named "sleep". The former
+ state sets up pins for ordinary operation whereas
+ the latter state will put the associated pins to sleep
+ when the UART is unused
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ clocks:
+ description:
+ When present, the first clock listed must correspond to
+ the clock named UARTCLK on the IP block, i.e. the clock
+ to the external serial line, whereas the second clock
+ must correspond to the PCLK clocking the internal logic
+ of the block. Just listing one clock (the first one) is
+ deprecated.
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: uartclk
+ - const: apb_pclk
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ items:
+ - const: rx
+ - const: tx
+
+ auto-poll:
+ description:
+ Enables polling when using RX DMA.
+ type: boolean
+
+ poll-rate-ms:
+ description:
+ Rate at which poll occurs when auto-poll is set.
+ default 100ms.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 100
+
+ poll-timeout-ms:
+ description:
+ Poll timeout when auto-poll is set, default
+ 3000ms.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 3000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+dependencies:
+ poll-rate-ms: [ auto-poll ]
+ poll-timeout-ms: [ auto-poll ]
+
+additionalProperties: false
+
+examples:
+ - |
+ serial@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 4>;
+ dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+ dma-names = "rx", "tx";
+ clocks = <&foo_clk>, <&bar_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+...
--
2.19.1
