Re: [PATCH v4 00/10] Add basic support for Socionext Milbeaut M10V SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 2019/03/01 23:34, Arnd Bergmann wrote:
On Wed, Feb 27, 2019 at 5:51 AM Sugaya Taichi
<sugaya.taichi@xxxxxxxxxxxxx> wrote:

Hi,

Here is the series of patches the initial support for SC2000(M10V) of
Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
source code.

SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html

Specifications for developers are below:
  - Quad-core 32bit Cortex-A7 on ARMv7-A architecture
  - NEON support
  - DSP
  - GPU
  - MAX 3GB DDR3
  - Cortex-M0 for power control
  - NAND Flash Interface
  - SD UHS-I
  - SD UHS-II
  - SDIO
  - USB2.0 HOST / Device
  - USB3.0 HOST / Device
  - PCI express Gen2
  - Ethernet Engine
  - I2C
  - UART
  - SPI
  - PWM

Support is quite minimal for now, since it only includes timer, clock,
pictrl and serial controller drivers, so we can only boot to userspace
through initramfs. Support for the other peripherals  will come eventually.

I've merged these all into the arm/newsoc branch now, with the
exception of the patch that Greg has already taken.

I'll do a little more build testing before that branch will be sent,
but I expect it will be fine.

      Arnd


Thanks a lot!




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux