[PATCH 1/4] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tomonori Sakita <tomonori.sakita@xxxxxxxxxx>

Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.

Signed-off-by: Tomonori Sakita <tomonori.sakita@xxxxxxxxxx>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@xxxxxxxxxx>
---
 drivers/tty/serial/fsl_lpuart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 241a48e..debdd1b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1697,7 +1697,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	/* ask the core to calculate the divisor */
-	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
-- 
2.1.4





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux