The following changes since commit d13937116f1e82bf508a6325111b322c30c85eb9:
Linux 5.0-rc6 (2019-02-10 14:42:20 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-5.1-rc1
for you to fetch changes up to f694936c3b5a4c140ded5b673555d95aedc866b9:
tty: xilinx_uartps: Correct return value in probe (2019-03-01 18:07:34 +0100)
----------------------------------------------------------------
TTY/Serial patches for 5.1-rc1
Here is the "big" patchset for the tty/serial driver layer for 5.1-rc1.
It's really not all that big, nothing major here.
There are a lot of tiny driver fixes and updates, combined with other
cleanups for different serial drivers and the vt layer. Full details
are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
Alexander Shiyan (2):
serial: clps711x: Remove board support
serial: max310x: Correction of the initial setting of the MODE1 bits for various supported ICs.
Alexandre Belloni (1):
tty: serial: lpc32xx_hs: fix missing console boot messages
Andreas Schwab (1):
tty/serial: use uart_console_write in the RISC-V SBL early console
Anssi Hannula (1):
serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
Atsushi Nemoto (3):
serial: fsl_lpuart: specify transmit FIFO size for 32-bit variant
serial: fsl_lpuart: consider TX FIFO too in lpuart32_tx_empty
serial: fsl_lpuart: DMA support for 32-bit variant
Chengguang Xu (1):
tty: serial: remove redundant likely annotation
Christoph Hellwig (1):
tty/synclink: remove ISA support
Geert Uytterhoeven (4):
serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
serial: sh-sci: Extract sci_dma_rx_reenable_irq()
serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
serial: sh-sci: Make RX/TX DMA function names consistent
Greg Kroah-Hartman (4):
Merge 5.0-rc2 into tty-next
Merge 5.0-rc4 into tty-next
tty: ldisc: add sysctl to prevent autoloading of ldiscs
Merge 5.0-rc6 into tty-next
Gustavo A. R. Silva (5):
sc16is7xx: Use struct_size() in devm_kzalloc()
serial: max310x: Use struct_size() in devm_kzalloc()
tty/n_hdlc: mark expected switch fall-through
tty: n_gsm: Mark expected switch fall-throughs
tty: hvc_xen: Mark expected switch fall-through
Heikki Krogerus (1):
serial: 8250_pci: Replace custom code with pci_match_id()
Hugo Lefeuvre (1):
tty/nozomi: use pci_iomap instead of ioremap_nocache
Jay Dolan (2):
serial: 8250_pci: Fix number of ports for ACCES serial cards
serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()
Jeffrey Hugo (1):
tty: serial: msm_serial: Remove __init from msm_console_setup()
Johan Hovold (1):
serdev: ttyport: call tiocmget and tiocmset ops directly
Kangjie Lu (1):
serial: max310x: pass return value of spi_register_driver
Lanqing Liu (1):
serial: sprd: Modify the baud rate calculation formula
Linus Walleij (1):
serial: 8250: Add OF support for Xscale variant
Loys Ollivier (1):
tty: serial: meson: if no alias specified use an available id
Lubomir Rintel (2):
serial: 8250_pxa: honor the port number from devicetree
serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart
Manfred Schlaegl (1):
tty: increase the default flip buffer limit to 2*640K
Martin Hostettler (4):
vt: refactor vc_ques to allow of other private sequences.
vt: Implement parsing for >, =, < private sequences.
vt: ignore csi sequences with intermediate characters.
vt: ignore sequences that contain ':' in parameters.
Mathieu Malaterre (1):
vt: annotate implicit fall throughs
Mikko Perttunen (1):
dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
Nathan Chancellor (1):
serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
Nicolas Pitre (5):
vcsa: clamp header values when they don't fit
vcs: poll(): cope with a deallocated vt
vcs: fasync(): make it consistent with poll()
vcs: restore and document initial POLLPRI event
vt: perform safe console erase in the right order
Petr Mladek (2):
sysrq: Restore original console_loglevel when sysrq disabled
sysrq: Remove duplicated sysrq message
Rajan Vaja (1):
tty: xilinx_uartps: Correct return value in probe
Rob Herring (3):
dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
dt-bindings: serial: Convert arm,pl011 to json-schema
Ryan Case (4):
tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
tty: serial: qcom_geni_serial: Remove xfer_mode variable
tty: serial: qcom_geni_serial: Use u32 for register variables
Stuart Menefy (1):
tty: serial: samsung: Enable baud clock during initialisation
Sugaya Taichi (1):
dt-bindings: serial: Add Milbeaut serial driver description
Thierry Reding (1):
serial: Add Tegra Combined UART driver
Tony Lindgren (2):
tty: n_gsm: Add copy_config() and gsm_config() to prepare for serdev
n_gsm: Constify u8 and unsigned char usage
Ulrich Hecht (1):
dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
Valentin Vidic (1):
n_tty: update comment for WAKEUP_CHARS define
Vignesh R (3):
serial: 8250_omap: Drop check for of_node
dt-bindings: serial: omap_serial: add clocks entry
serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency
Vladimir Murzin (2):
serial: mps2-uart: move to dynamic port allocation
serial: mps2-uart: support combined irq
YueHaibing (1):
tty: ipwireless: Fix potential NULL pointer dereference
Zhou Yanjie (2):
Serial: Ingenic: Add support for the X1000.
Dt-bindings: Serial: Add X1000 serial bindings.
Documentation/devicetree/bindings/serial/8250.txt | 1 +
.../devicetree/bindings/serial/ingenic,uart.txt | 3 +-
.../devicetree/bindings/serial/milbeaut-uart.txt | 21 ++
.../bindings/serial/nvidia,tegra194-tcu.txt | 35 +++
.../devicetree/bindings/serial/omap_serial.txt | 2 +
Documentation/devicetree/bindings/serial/pl011.txt | 51 ----
.../devicetree/bindings/serial/pl011.yaml | 126 +++++++++
.../bindings/serial/renesas,rzn1-uart.txt | 10 -
.../bindings/serial/renesas,sci-serial.txt | 2 +
.../bindings/serial/snps-dw-apb-uart.txt | 76 ------
.../bindings/serial/snps-dw-apb-uart.yaml | 140 ++++++++++
drivers/tty/Kconfig | 24 ++
drivers/tty/hvc/hvc_xen.c | 2 +-
drivers/tty/ipwireless/hardware.c | 2 +
drivers/tty/n_gsm.c | 246 ++++++++---------
drivers/tty/n_hdlc.c | 2 +-
drivers/tty/n_tty.c | 6 +-
drivers/tty/nozomi.c | 10 +-
drivers/tty/serdev/serdev-ttyport.c | 4 +-
drivers/tty/serial/8250/8250_ingenic.c | 13 +-
drivers/tty/serial/8250/8250_of.c | 5 +
drivers/tty/serial/8250/8250_omap.c | 75 +++---
drivers/tty/serial/8250/8250_pci.c | 170 +++++++++---
drivers/tty/serial/8250/8250_pxa.c | 4 +
drivers/tty/serial/Kconfig | 22 ++
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/clps711x.c | 23 +-
drivers/tty/serial/fsl_lpuart.c | 208 +++++++++++---
drivers/tty/serial/lpc32xx_hs.c | 4 +
drivers/tty/serial/max310x.c | 21 +-
drivers/tty/serial/meson_uart.c | 13 +-
drivers/tty/serial/mps2-uart.c | 138 +++++++---
drivers/tty/serial/msm_serial.c | 2 +-
drivers/tty/serial/qcom_geni_serial.c | 279 ++++++++-----------
drivers/tty/serial/samsung.c | 42 +++
drivers/tty/serial/sc16is7xx.c | 4 +-
drivers/tty/serial/serial_core.c | 2 +-
drivers/tty/serial/sh-sci.c | 71 +++--
drivers/tty/serial/sprd_serial.c | 2 +-
drivers/tty/serial/tegra-tcu.c | 298 +++++++++++++++++++++
drivers/tty/serial/xilinx_uartps.c | 40 ++-
drivers/tty/synclink.c | 54 ----
drivers/tty/sysrq.c | 8 +-
drivers/tty/tty_buffer.c | 2 +-
drivers/tty/tty_io.c | 3 +
drivers/tty/tty_ldisc.c | 47 ++++
drivers/tty/vt/vc_screen.c | 48 +++-
drivers/tty/vt/vt.c | 77 ++++--
include/linux/console_struct.h | 2 +-
include/uapi/linux/serial_core.h | 3 +
50 files changed, 1672 insertions(+), 772 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
delete mode 100644 Documentation/devicetree/bindings/serial/pl011.txt
create mode 100644 Documentation/devicetree/bindings/serial/pl011.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
delete mode 100644 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
create mode 100644 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
create mode 100644 drivers/tty/serial/tegra-tcu.c
