Linux Serial

• Thread Index

• RE: [PATCH v3] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Prabhakar Mahadev Lad
• Re: [PATCH] tty: correct kernel-doc inconsistency
  • From: Lukas Wunner
• Re: [PATCH] tty: correct kernel-doc inconsistency
  • From: Jiri Slaby
• [PATCH] tty: correct kernel-doc inconsistency
  • From: Colton Lewis
• [tty:tty-testing] BUILD SUCCESS ea1be1e59b19017e61aa357d524b743ba5602d3c
  • From: kernel test robot
• [PATCH v3] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Tony Lindgren
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Naresh Kamboju
• Re: [PATCH v2] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Marc Zyngier
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Dave Jiang
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Arnd Bergmann
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Vinod Koul
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Dave Jiang
• Re: [PATCH v1] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Andy Shevchenko
• [PATCH v2] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Andy Shevchenko
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Dave Jiang
• [PATCH v1] serial: core: Initialise spin lock before use in uart_configure_port()
  • From: Andy Shevchenko
• Re: [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Arnd Bergmann
• [qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  • From: Naresh Kamboju
• Re: [PATCH v3] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: meson_uart: Init port lock early
  • From: Marc Zyngier
• [tty:tty-linus] BUILD SUCCESS f38278e9b810b06aff2981d505267be984423ba3
  • From: kernel test robot
• Re: [PATCH] tty: serial: meson_uart: Init port lock early
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: meson_uart: Init port lock early
  • From: Marc Zyngier
• Re: [PATCH] tty: serial: meson_uart: Init port lock early
  • From: Andy Shevchenko
• [PATCH] tty: serial: meson_uart: Init port lock early
  • From: Marc Zyngier
• Re: [PATCH V6] serial: msm_geni_serial_console : Add Earlycon support
  • From: kernel test robot
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Andy Shevchenko
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Andy Shevchenko
• [PATCH v3] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Tamseel Shams
• RE: [PATCH v2] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: M Tamseel Shams
• [tty:tty-testing] BUILD SUCCESS 44c413d9a51752056d606bf6f312003ac1740fab
  • From: kernel test robot
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Tony Lindgren
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Guenter Roeck
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Tony Lindgren
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Lad, Prabhakar
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Lad, Prabhakar
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Lad, Prabhakar
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Andy Shevchenko
• Fwd: PROBLEM: tty devices with future timestamps
  • From: Egmont Koblinger
• Re: [PATCH v2 0/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 1/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Greg Kroah-Hartman
• Re: PROBLEM: tty devices with future timestamps
  • From: Greg KH
• Re: PROBLEM: tty devices with future timestamps
  • From: Egmont Koblinger
• Re: [PATCH v2 0/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Lukas Wunner
• Re: [PATCH v2 0/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Serge Semin
• [PATCH v2 0/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Daniel Winkler
• [PATCH v2 1/1] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Daniel Winkler
• Re: [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Daniel Winkler
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Greg Kroah-Hartman
• [PATCH] serial: sh-sci: Initialize spinlock for uart console
  • From: Lad Prabhakar
• Re: [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Greg Kroah-Hartman
• Re: PROBLEM: tty devices with future timestamps
  • From: Greg KH
• Re: [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Alain Michaud
• Re: [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Serge Semin
• Re: [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Lukas Wunner
• [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
  • From: Daniel Winkler
• Re: [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
  • From: Rob Herring
• Re: [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Rajendra Nayak
• Re: [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Sumit Garg
• Re: [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Viresh Kumar
• Re: [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Rajendra Nayak
• Re: [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Stephen Boyd
• Re: [PATCH v4] tty: serial: don't do termios for BTIF
  • From: Greg KH
• Re: [PATCH v4] tty: serial: don't do termios for BTIF
  • From: Andy Shevchenko
• [PATCH 4.4 024/135] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• Re: [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Daniel Thompson
• [PATCH 4.9 031/191] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• Re: [PATCH v2] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
  • From: Erwan LE RAY
• RE: [EXT] Re: [PATCH tty/serial 1/1] tty: serial: imx: enable imx serial console port as module
  • From: Andy Duan
• Re: [PATCH tty/serial 1/1] tty: serial: imx: enable imx serial console port as module
  • From: Uwe Kleine-König
• [PATCH v2] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Tamseel Shams
• [tty:tty-linus] BUILD SUCCESS 76ed2e105796710cf5b8a4ba43c81eceed948b70
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS 890814504eeb930c15a1e238c3fff7dfc238b8c9
  • From: kernel test robot
• RE: [EXT] Re: [PATCH tty/serial 1/1] tty: serial: imx: enable imx serial console port as module
  • From: Andy Duan
• Re: [PATCH tty/serial 1/1] tty: serial: imx: enable imx serial console port as module
  • From: Greg KH
• Re: [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 0/3] serial: core: fix up sysrq regressions
  • From: Greg Kroah-Hartman
• Re: [PATCH v4] tty: serial: don't do termios for BTIF
  • From: Greg KH
• Re: [PATCH 0/2] serial: qcom_geni_serial: Use the FIFOs properly for console
  • From: Greg KH
• Re: [PATCH v1] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial_core: Fix uart_state refcnt leak when the port startup
  • From: Greg Kroah-Hartman
• PROBLEM: tty devices with future timestamps
  • From: Egmont Koblinger
• [PATCH 2/2] serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word
  • From: Douglas Anderson
• [PATCH 1/2] serial: qcom_geni_serial: Make kgdb work even if UART isn't console
  • From: Douglas Anderson
• [PATCH 0/2] serial: qcom_geni_serial: Use the FIFOs properly for console
  • From: Douglas Anderson
• Re: [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Doug Anderson
• [PATCH v2] tty: serial: fsl_lpuart: minimum baud rate support
  • From: Vabhav Sharma
• RE: [PATCH] tty: serial: fsl_lpuart: minimum baud rate support
  • From: Vabhav Sharma (OSS)
• Re: rk3399: uart2 crippled signal on tx @115200
  • From: Chris Ruehl
• Re: Possible bug in drivers/tty/vt/vt.c
  • From: Greg KH
• Re: Possible bug in drivers/tty/vt/vt.c
  • From: Anthony Canino
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Petr Mladek
• Re: [PATCH] tty: serial: fsl_lpuart: minimum baud rate support
  • From: Greg KH
• RE: [PATCH] tty: serial: fsl_lpuart: minimum baud rate support
  • From: Vabhav Sharma (OSS)
• Re: [PATCH] tty: serial: fsl_lpuart: minimum baud rate support
  • From: Greg KH
• [PATCH] tty: serial: fsl_lpuart: minimum baud rate support
  • From: Vabhav Sharma
• [tty:tty-testing] BUILD SUCCESS 5de30b286e7166164f9e45de991bde26f5db8298
  • From: kernel test robot
• Re: [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Bjorn Andersson
• Re: [PATCH V8 0/8] Add interconnect support to QSPI and QUP drivers
  • From: Bjorn Andersson
• [PATCH] tty: serial: qcom_geni_serial: Clean up an ARRAY_SIZE() vs sizeof()
  • From: Dan Carpenter
• Re: [PATCH] tty: serial_core: Fix uart_state refcnt leak when the port startup
  • From: Jiri Slaby
• Re: [PATCH] tty: serial_core: Fix uart_state refcnt leak when the port startup
  • From: Greg Kroah-Hartman
• [PATCH 5.4 120/314] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Greg Kroah-Hartman
• [PATCH 4.19 071/206] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Greg Kroah-Hartman
• [PATCH 4.14 045/136] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Greg Kroah-Hartman
• Re: [PATCH V6] serial: msm_geni_serial_console : Add Earlycon support
  • From: Bjorn Andersson
• Re: Possible bug in drivers/tty/vt/vt.c
  • From: Greg KH
• Re: [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Daniel Thompson
• Re: [PATCH V8 7/8] spi: spi-qcom-qspi: Add interconnect support
  • From: Mark Brown
• Re: [PATCH V8 6/8] spi: spi-geni-qcom: Add interconnect support
  • From: Mark Brown
• Re: [PATCH V8 5/8] spi: spi-geni-qcom: Combine the clock setting code
  • From: Mark Brown
• Re: [PATCH 2/7] tty: serial: Add poll_get_irq() to the polling interface
  • From: Daniel Thompson
• [PATCH V8 5/8] spi: spi-geni-qcom: Combine the clock setting code
  • From: Akash Asthana
• [PATCH V8 8/8] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana
• [PATCH V8 7/8] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana
• [PATCH V8 6/8] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana
• [PATCH V8 3/8] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana
• [PATCH V8 4/8] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana
• [PATCH V8 2/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana
• [PATCH V8 0/8] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana
• [PATCH V8 1/8] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana
• Re: [PATCH 4/7] serial: kgdb_nmi: Add support for interrupt based fallback
  • From: Sumit Garg
• Re: Possible bug in drivers/tty/vt/vt.c
  • From: Anthony Canino
• Re: [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Sumit Garg
• Re: [PATCH 2/7] tty: serial: Add poll_get_irq() to the polling interface
  • From: Sumit Garg
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Doug Anderson
• Re: [PATCH v7 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
  • From: Serge Semin
• Re: [PATCH 4/7] serial: kgdb_nmi: Add support for interrupt based fallback
  • From: Daniel Thompson
• Re: [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Daniel Thompson
• Re: [PATCH 2/7] tty: serial: Add poll_get_irq() to the polling interface
  • From: Daniel Thompson
• Re: [PATCH v1 1/6] mips: Return proper error code from console ->setup() hook
  • From: Andy Shevchenko
• [PATCH 7/7] serial: kgdb_nmi: Replace hrtimer with irq_work ping
  • From: Sumit Garg
• [PATCH 6/7] serial: amba-pl011: Implement poll_get_irq() interface
  • From: Sumit Garg
• [PATCH 5/7] serial: 8250: Implement poll_get_irq() interface
  • From: Sumit Garg
• [PATCH 4/7] serial: kgdb_nmi: Add support for interrupt based fallback
  • From: Sumit Garg
• [PATCH 3/7] kgdb: Add request_nmi() to the io ops table for kgdboc
  • From: Sumit Garg
• [PATCH 1/7] serial: kgdb_nmi: Allow NMI console to replace kgdb IO console
  • From: Sumit Garg
• [PATCH 2/7] tty: serial: Add poll_get_irq() to the polling interface
  • From: Sumit Garg
• [PATCH 0/7] Enable support for kgdb NMI console feature
  • From: Sumit Garg
• Re: [PATCH v1 1/6] mips: Return proper error code from console ->setup() hook
  • From: Jiri Slaby
• [PATCH V6] serial: msm_geni_serial_console : Add Earlycon support
  • From: Akash Asthana
• Re: [PATCH V5] serial: msm_geni_serial_console : Add Earlycon support
  • From: Mukesh, Savaliya
• Re: [PATCH v2] serial: 8250_mtk: Switch to use platform_get_irq()
  • From: Matthias Brugger
• RE: [PATCH] serial: samsung: fix spelling mistake
  • From: Alim Akhtar
• Re: [PATCH v2] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
  • From: Linus Walleij
• Re: [PATCH v7 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
  • From: Russell King - ARM Linux admin
• Re: [PATCH] serial: sh-sci: fix uninitialized variable warning
  • From: Kees Cook
• [PATCH v7 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Serge Semin
• [PATCH v7 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Serge Semin
• [PATCH v7 1/3] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• [PATCH v7 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
  • From: Serge Semin
• [PATCH v4] tty: serial: don't do termios for BTIF
  • From: sean.wang
• Re: [PATCH v6 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Serge Semin
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Sergey Senozhatsky
• Re: [PATCH RESEND v6 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Serge Semin
• Re: [PATCH RESEND v6 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Serge Semin
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Petr Mladek
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Sergey Senozhatsky
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Andy Shevchenko
• Re: [PATCH v1 1/6] mips: Return proper error code from console ->setup() hook
  • From: Thomas Bogendoerfer
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Petr Mladek
• Re: [PATCH v1 6/6] console: Fix trivia typo 'change' -> 'chance'
  • From: Benjamin Herrenschmidt
• Re: [PATCH v1 5/6] console: Propagate error code from console ->setup()
  • From: Benjamin Herrenschmidt
• Re: [PATCH v1 2/6] serial: sunsab: Return proper error code from console ->setup() hook
  • From: David Miller
• Re: [PATCH v1 3/6] serial: sunzilog: Return proper error code from console ->setup() hook
  • From: David Miller
• Re: [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Sergey Senozhatsky
• [PATCH v1 5/6] console: Propagate error code from console ->setup()
  • From: Andy Shevchenko
• [PATCH v1 0/6] console: unify return codes from ->setup() hook
  • From: Andy Shevchenko
• [PATCH v1 6/6] console: Fix trivia typo 'change' -> 'chance'
  • From: Andy Shevchenko
• [PATCH v1 2/6] serial: sunsab: Return proper error code from console ->setup() hook
  • From: Andy Shevchenko
• [PATCH v1 4/6] tty: hvc: Return proper error code from console ->setup() hook
  • From: Andy Shevchenko
• [PATCH v1 3/6] serial: sunzilog: Return proper error code from console ->setup() hook
  • From: Andy Shevchenko
• [PATCH v1 1/6] mips: Return proper error code from console ->setup() hook
  • From: Andy Shevchenko
• [PATCH v1] serial: 8250_ingenic: Switch to use platform_get_irq()
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250_mtk: Switch to use platform_get_irq()
  • From: Andy Shevchenko
• [PATCH v1] serial: 8250_pxa: Switch to use platform_get_irq()
  • From: Andy Shevchenko
• [PATCH v1] serial: 8250_mtk: Switch to use platform_get_irq()
  • From: Andy Shevchenko
• [PATCH v1] serial: 8250_omap: Switch to use platform_get_irq()
  • From: Andy Shevchenko
• [PATCH V6] GCOV: Add config to check the preqequisites situation
  • From: gengcixi
• rk3399: uart2 crippled signal on tx @115200
  • From: Chris Ruehl
• [PATCH v1] serial: 8250_em: Switch to use platform_get_irq()
  • From: Andy Shevchenko
• Re: [PATCH RESEND v6 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Andy Shevchenko
• Re: [PATCH v6 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Andy Shevchenko
• [PATCH] Revert "tty: xilinx_uartps: Fix missing id assignment to the console"
  • From: Jan Kiszka
• Re: [PATCH] Revert "tty: xilinx_uartps: Fix missing id assignment to the console"
  • From: Michal Simek
• Re: [PATCH RESEND v6 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Andy Shevchenko
• Re: [PATCH v2] tty: xilinx_uartps: Fix missing id assignment to the console
  • From: Michal Simek
• [PATCH AUTOSEL 5.7 043/388] serial: 8250: Fix max baud limit in generic 8250 port
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 032/266] serial: 8250: Fix max baud limit in generic 8250 port
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 122/266] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 024/172] serial: 8250: Fix max baud limit in generic 8250 port
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 076/172] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 047/108] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• [PATCH AUTOSEL 4.9 36/80] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 29/60] serial: amba-pl011: Make sure we initialize the port.lock spinlock
  • From: Sasha Levin
• [PATCH RESEND v6 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Serge Semin
• [PATCH v6 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Serge Semin
• [PATCH v6 1/3] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• [PATCH v6 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
  • From: Serge Semin
• RE: [RFC PATCH] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: M Tamseel Shams
• RE: [RFC PATCH] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: M Tamseel Shams
• [PATCH] serial: samsung: Minor whitespace cleanups
  • From: Krzysztof Kozlowski
• [PATCH] serial: samsung: fix spelling mistake
  • From: Tamseel Shams
• Re: [PATCH v3] tty: serial: don't do termios for BTIF
  • From: sean.wang
• Re: [PATCH v3] tty: serial: don't do termios for BTIF
  • From: sean.wang
• Re: [PATCH 26/38] vt: use newly defined CUR_* macros
  • From: Helge Deller
• [PATCH] tty/serial: fix serial_core.c kernel-doc warnings
  • From: Randy Dunlap
• Re: [RFC PATCH] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Robin Murphy
• Re: [RFC PATCH] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Greg KH
• [RFC PATCH] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC
  • From: Tamseel Shams
• [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Rajendra Nayak
• Re: [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Mark Brown
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Joakim Tjernlund
• Re: [PATCH] serial: 8250_port: Fix imprecise external abort for mctrl if inactive
  • From: Andy Shevchenko
• Re: [RFC PATCH V5] GCOV: Add config to check the preqequisites situation
  • From: Peter Oberparleiter
• [PATCH 05/38] vt: switch G0/1_charset to an array
  • From: Jiri Slaby
• [PATCH 04/38] vt: deduplicate setGx code
  • From: Jiri Slaby
• [PATCH 09/38] vt: get rid of VT10.ID macros
  • From: Jiri Slaby
• [PATCH 07/38] vt: remove 25 years stale comment
  • From: Jiri Slaby
• [PATCH 03/38] vc: switch state to bool
  • From: Jiri Slaby
• [PATCH 06/38] vt: convert vc_tab_stop to bitmap
  • From: Jiri Slaby
• [PATCH 10/38] vt: move vc_translate to vt.c and rename it
  • From: Jiri Slaby
• [PATCH 14/38] vt: extract attribute inversion to vc_invert_attr
  • From: Jiri Slaby
• [PATCH 16/38] vc: move translation out of do_con_write
  • From: Jiri Slaby
• [PATCH 15/38] vt: move rescan_last_byte label earlier
  • From: Jiri Slaby
• [PATCH 11/38] vt: use modern types in do_con_write
  • From: Jiri Slaby
• [PATCH 18/38] vc: extract detecting control characters from do_con_write
  • From: Jiri Slaby
• [PATCH 19/38] vc: move normal char processing from do_con_write
  • From: Jiri Slaby
• [PATCH 17/38] vc: introduce struct vc_draw_region
  • From: Jiri Slaby
• [PATCH 13/38] vt: rearrange vc_translate_unicode
  • From: Jiri Slaby
• [PATCH 20/38] vc: simplify condition in vc_con_write_normal
  • From: Jiri Slaby
• [PATCH 25/38] vt: redefine world of cursor macros
  • From: Jiri Slaby
• [PATCH 01/38] vc: separate state
  • From: Jiri Slaby
• [PATCH 22/38] vt: make tc write more obvious in vc_con_write_normal
  • From: Jiri Slaby
• [PATCH 24/38] vt: whitespace and paren cleanup in add_softcursor
  • From: Jiri Slaby
• [PATCH 23/38] vt: synchronize types and use min in csi_X
  • From: Jiri Slaby
• [PATCH 21/38] vt: simplify vc_attr handling in vc_con_write_normal
  • From: Jiri Slaby
• [PATCH 28/38] vt: simplify noncolor attributes in build_attr
  • From: Jiri Slaby
• [PATCH 27/38] vt: remove superfluous parens in invert_screen and build_attr
  • From: Jiri Slaby
• [PATCH 30/38] vt_ioctl: eliminate use of uival and ucval
  • From: Jiri Slaby
• [PATCH 33/38] vt_ioctl: move vt_setactivate out of vt_ioctl
  • From: Jiri Slaby
• [PATCH 26/38] vt: use newly defined CUR_* macros
  • From: Jiri Slaby
• [PATCH 29/38] vt_ioctl: eliminate ret & breaks in vt_ioctl
  • From: Jiri Slaby
• [PATCH 34/38] vt_ioctl: move vt_reldisp out of vt_ioctl
  • From: Jiri Slaby
• [PATCH 36/38] vt_ioctl: move vt_io_fontreset out of vt_io_ioctl
  • From: Jiri Slaby
• [PATCH 35/38] vt_ioctl: move vt_resizex out of vt_ioctl
  • From: Jiri Slaby
• [PATCH 32/38] vt_ioctl: move io ioctls to a separate function
  • From: Jiri Slaby
• [PATCH 37/38] vt_ioctl: move vt_kdsetmode out of vt_k_ioctl
  • From: Jiri Slaby
• [PATCH 38/38] vt_ioctl: move perm checks level up
  • From: Jiri Slaby
• [PATCH 31/38] vt_ioctl: move K* ioctls to a separate function
  • From: Jiri Slaby
• [PATCH 12/38] vt: separate unicode handling into vc_translate_unicode
  • From: Jiri Slaby
• [PATCH 08/38] vt: use tty_insert_flip_string in respond_string
  • From: Jiri Slaby
• [PATCH 02/38] vt: introduce enum vc_intensity for intensity
  • From: Jiri Slaby
• [PATCH] um: line, remove put_char
  • From: Jiri Slaby
• Re: [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana
• Re: [PATCH] tty: serial_core: Fix uart_state leak when port shutdown
  • From: Jiri Slaby
• [PATCH] tty: serial_core: Fix uart_state refcnt leak when the port startup
  • From: Xiyu Yang
• [PATCH] tty: serial_core: Fix uart_state leak when port shutdown
  • From: Xiyu Yang
• [PATCH v2] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
  • From: Christophe Leroy
• Re: [PATCH v1] serial: core: make static analyzer happy about locks
  • From: Tony Lindgren
• Re: [PATCH v2 3/3] serial: core: drop redundant sysrq checks
  • From: Dmitry Safonov
• Re: [PATCH v2 2/3] serial: core: fix sysrq overhead regression
  • From: Dmitry Safonov
• Re: [PATCH v2 2/3] serial: core: fix sysrq overhead regression
  • From: Dmitry Safonov
• Re: [PATCH v2 0/3] serial: core: fix up sysrq regressions
  • From: Johan Hovold
• Re: [PATCH v2 2/3] serial: core: fix sysrq overhead regression
  • From: Johan Hovold
• Re: [PATCH v2] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: core: drop unnecessary gpio include
  • From: Johan Hovold
• Re: [PATCH] serial: core: drop unnecessary gpio include
  • From: Lukas Wunner
• Re: [PATCH v2 2/3] serial: core: fix sysrq overhead regression
  • From: Dmitry Safonov
• Re: [PATCH v2 0/3] serial: core: fix up sysrq regressions
  • From: Andy Shevchenko
• [PATCH] serial: core: drop unnecessary gpio include
  • From: Johan Hovold
• [PATCH v2 2/3] serial: core: fix sysrq overhead regression
  • From: Johan Hovold
• [PATCH v2 1/3] Revert "serial: core: Refactor uart_unlock_and_check_sysrq()"
  • From: Johan Hovold
• [PATCH v2 3/3] serial: core: drop redundant sysrq checks
  • From: Johan Hovold
• [PATCH v2 0/3] serial: core: fix up sysrq regressions
  • From: Johan Hovold
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Mark Brown
• Re: [PATCH V7 RESEND 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana
• Re: [PATCH] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
  • From: Linus Walleij
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Joakim Tjernlund
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Joakim Tjernlund
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [RFC PATCH V5] GCOV: Add config to check the preqequisites situation
  • From: gengcixi
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Maarten Brock
• Re: [PATCH V7 RESEND 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Matthias Kaehlcke
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Joakim Tjernlund
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Mark Brown
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Joakim Tjernlund
• Re: Default ECHO on TTYs causes unwanted garbage chars
  • From: Greg KH
• Default ECHO on TTYs causes unwanted garbage chars
  • From: Joakim Tjernlund
• Re: [PATCH v2] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Schrempf Frieder
• [PATCH v2] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Schrempf Frieder
• Re: [PATCH] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Schrempf Frieder
• [PATCH V7 RESEND 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana
• [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 RESEND 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 RESEND 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana
• [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 RESEND 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 RESEND 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana
• [PATCH V7 RESEND 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana
• Re: [PATCH V7 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana
• [PATCH AUTOSEL 5.7 212/274] kgdboc: Use a platform device to handle tty drivers showing up late
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 130/175] kgdboc: Use a platform device to handle tty drivers showing up late
  • From: Sasha Levin
• Re: [PATCH v7] alpha: fix memory barriers so that they conform to the specification
  • From: Matt Turner
• [PATCH AUTOSEL 5.6 181/606] tty: serial: add missing spin_lock_init for SiFive serial console
  • From: Sasha Levin
• Re: [PATCH] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Fabio Estevam
• Re: [PATCH] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Fabio Estevam
• [PATCH] serial: imx: Fix handling of TC irq in combination with DMA
  • From: Schrempf Frieder
• Re: [PATCH v7 5/5] drivers/tty/serial: add LiteUART driver
  • From: Mateusz Holenko
• Re: [PATCH v7] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
  • From: Johan Hovold
• Re: [GIT PULL] TTY/Serial driver patches for 5.8-rc1
  • From: pr-tracker-bot
• [GIT PULL] TTY/Serial driver patches for 5.8-rc1
  • From: Greg KH
• [PATCH] 8250-men-mcb: fix signed/unsigned confusion
  • From: Pavel Machek
• [PATCH] serial: mxs-auart: Use devm_ioremap() to fix the missing undo bug
  • From: Chuhong Yuan
• [PATCH] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
  • From: Christophe Leroy
• Re: [PATCH v2 10/10] ARM: dts: r8a7742-iwg21d-q7: Add support for iWave G21D-Q7 board based on RZ/G1H
  • From: Lad, Prabhakar
• [PATCH] serial: serial-tegra: reduce irq-latency after rx errors
  • From: Randolph Maaßen
• Re: [PATCH v2 10/10] ARM: dts: r8a7742-iwg21d-q7: Add support for iWave G21D-Q7 board based on RZ/G1H
  • From: Geert Uytterhoeven
• [PATCH tty/serial 1/1] tty: serial: imx: enable imx serial console port as module
  • From: Fugang Duan
• Re: [PATCH v7 5/5] drivers/tty/serial: add LiteUART driver
  • From: Randy Dunlap
• [PATCH v7 5/5] drivers/tty/serial: add LiteUART driver
  • From: Mateusz Holenko
• [PATCH v7 4/5] dt-bindings: serial: document LiteUART bindings
  • From: Mateusz Holenko
• [PATCH v7 3/5] drivers/soc/litex: add LiteX SoC Controller driver
  • From: Mateusz Holenko
• [PATCH v7 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
  • From: Mateusz Holenko
• [PATCH v7 1/5] dt-bindings: vendor: add vendor prefix for LiteX
  • From: Mateusz Holenko
• [PATCH v7 0/5] LiteX SoC controller and LiteUART serial driver
  • From: Mateusz Holenko
• Re: [PATCH v6 5/5] drivers/tty/serial: add LiteUART driver
  • From: Mateusz Holenko
• Re: [PATCH v6 5/5] drivers/tty/serial: add LiteUART driver
  • From: Greg Kroah-Hartman
• Re: [PATCH v6 5/5] drivers/tty/serial: add LiteUART driver
  • From: Mateusz Holenko
• Re: [PATCH 22/28] dt-bindings: i2c: Convert i2c-pxa to json-schema
  • From: Wolfram Sang
• Re: [PATCH 2/4] serial: core: fix broken sysrq port unlock
  • From: Johan Hovold
• Re: [PATCH 2/4] serial: core: fix broken sysrq port unlock
  • From: Johan Hovold
• [PATCH] serial: kgdboc: Fix bad line wrapping in comment
  • From: Douglas Anderson
• Re: [PATCH] serial: 8250_port: Fix imprecise external abort for mctrl if inactive
  • From: Tony Lindgren
• Re: [PATCH 2/4] serial: core: fix broken sysrq port unlock
  • From: Dmitry Safonov
• Re: [PATCH 2/4] serial: core: fix broken sysrq port unlock
  • From: Andy Shevchenko
• [PATCH v1] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• [PATCH 3/4] serial: core: fix sysrq overhead regression
  • From: Johan Hovold
• [PATCH 4/4] serial: core: drop redundant sysrq checks
  • From: Johan Hovold
• [PATCH 2/4] serial: core: fix broken sysrq port unlock
  • From: Johan Hovold
• [PATCH 1/4] Revert "serial: core: Refactor uart_unlock_and_check_sysrq()"
  • From: Johan Hovold
• [PATCH 0/4] serial: core: fix up sysrq regressions
  • From: Johan Hovold
• Re: [PATCH] serial: 8250_port: Fix imprecise external abort for mctrl if inactive
  • From: Tony Lindgren
• Re: [PATCH] serial: 8250_port: Fix imprecise external abort for mctrl if inactive
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_port: Fix imprecise external abort for mctrl if inactive
  • From: Johan Hovold
• [PATCH] serial: 8250_port: Fix imprecise external abort for mctrl if inactive
  • From: Tony Lindgren
• Re: [RFC PATCH v4] GCOV: profile by modules
  • From: Cixi Geng
• Re: [PATCH v2] tty: xilinx_uartps: Fix missing id assignment to the console
  • From: Michal Simek
• [tty:tty-testing] BUILD SUCCESS a1b44ea340b21c99b34c93acad233da727cb88ba
  • From: kbuild test robot
• Re: [PATCH] tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
  • From: Stephen Boyd
• Re: [PATCH v2] tty: xilinx_uartps: Fix missing id assignment to the console
  • From: Jan Kiszka
• Re: [PATCH 1/1] tty: serial: owl: Add support for kernel debugger
  • From: Cristian Ciocaltea
• Re: [PATCH 1/1] tty: serial: owl: Add support for kernel debugger
  • From: Andreas Färber
• [PATCH 1/1] tty: serial: owl: Add support for kernel debugger
  • From: Cristian Ciocaltea
• Re: [PATCH 1/1] tty: serial: owl: Initialize lock before registering port
  • From: Andy Shevchenko
• Re: [PATCH 1/1] tty: serial: owl: Initialize lock before registering port
  • From: Andreas Färber
• Re: [PATCH 1/1] tty: serial: owl: Initialize lock before registering port
  • From: Andy Shevchenko
• Re: [PATCH 1/1] tty: serial: owl: Initialize lock before registering port
  • From: Greg Kroah-Hartman
• [PATCH 1/1] tty: serial: owl: Initialize lock before registering port
  • From: Cristian Ciocaltea
• [PATCH] tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
  • From: satya priya
• [PATCH v4 1/2] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• [PATCH v4 2/2] sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• [PATCH v4 0/2] sc16is7xx: IrDA mode and threaded IRQs
  • From: Daniel Mack
• Re: [PATCH 5/6] gnss: motmdm: Add support for Motorola Mapphone MDM6600 modem
  • From: Tony Lindgren
• Re: [PATCH v3 1/6] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Rob Herring
• Re: [PATCH] dt-bindings: serial: Add renesas,em-uart bindings
  • From: Rob Herring
• Re: [PATCH v3 1/2] dt-bindings: serial: Add binding for rs485 bus termination GPIO
  • From: Rob Herring
• Re: [PATCH v2 03/10] dt-bindings: serial: renesas,scifa: Document r8a7742 bindings
  • From: Rob Herring
• [PATCH tty-next] tty: serial: imx: clear Ageing Timer Interrupt in handler
  • From: Matthias Schiffer
• Re: [RFC PATCH v4] GCOV: profile by modules
  • From: Peter Oberparleiter
• Re: [PATCH 5/6] gnss: motmdm: Add support for Motorola Mapphone MDM6600 modem
  • From: Johan Hovold
• Re: [PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
  • From: Pavel Machek
• Re: [PATCH 4/6] serdev: ngsm: Add generic serdev-ngsm driver
  • From: Johan Hovold
• Re: [PATCH] 16C950 UART enable Hardware Flow Control
  • From: Pavel Machek
• Re: [PATCH 3/6] dt-bindings: serdev: ngsm: Add binding for GNSS child node
  • From: Johan Hovold
• Re: [PATCH 2/6] dt-bindings: serdev: ngsm: Add binding for serdev-ngsm
  • From: Johan Hovold
• Re: [PATCH 1/6] tty: n_gsm: Add support for serdev drivers
  • From: Johan Hovold
• Re: [PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
  • From: Johan Hovold
• Re: [PATCHv6 0/4] n_gsm serdev support and protocol driver for droid4 modem
  • From: Johan Hovold
• [tty:tty-testing] BUILD SUCCESS b86dab054059b970111b5516ae548efaae5b3aae
  • From: kbuild test robot
• [PATCH V1 1/1] serial: 8250_fintek: Add F81966 Support
  • From: Ji-Ze Hong (Peter Hong)
• Re: [PATCH] 16C950 UART enable Hardware Flow Control
  • From: Denis Ahrens
• Re: [PATCH 3/6] dt-bindings: serdev: ngsm: Add binding for GNSS child node
  • From: Rob Herring
• [PATCH v6 5/5] drivers/tty/serial: add LiteUART driver
  • From: Mateusz Holenko
• [PATCH v6 4/5] dt-bindings: serial: document LiteUART bindings
  • From: Mateusz Holenko
• [PATCH v6 3/5] drivers/soc/litex: add LiteX SoC Controller driver
  • From: Mateusz Holenko
• [PATCH v6 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
  • From: Mateusz Holenko
• [PATCH v6 1/5] dt-bindings: vendor: add vendor prefix for LiteX
  • From: Mateusz Holenko
• [PATCH v6 0/5] LiteX SoC controller and LiteUART serial driver
  • From: Mateusz Holenko
• Re: [PATCH V7 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Wolfram Sang
• Re: [PATCH V7 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Greg KH
• Re: [PATCH] 16C950 UART enable Hardware Flow Control
  • From: Johan Hovold
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• Re: [PATCH v7] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• [PATCH v5 1/3] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• [PATCH v5 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Serge Semin
• [PATCH v5 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Serge Semin
• [PATCH v5 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
  • From: Serge Semin
• Re: [PATCH v4 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Serge Semin
• Re: [PATCH V7 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Matthias Kaehlcke
• Re: [PATCH v4 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250: Enable 16550A variants by default on non-x86
  • From: Josh Triplett
• Re: [PATCH] serial: 8250: Enable 16550A variants by default on non-x86
  • From: Josh Triplett
• [PATCH v4 3/3] serial: 8250_dw: Fix common clocks usage race condition
  • From: Serge Semin
• [PATCH v4 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
  • From: Serge Semin
• [PATCH v4 1/3] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• [PATCH v4 0/3] serial: 8250_dw: Fix ref clock usage
  • From: Serge Semin
• [PATCH] tty: hvc_console, fix crashes on parallel open/close
  • From: Jiri Slaby
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• [PATCH v7] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• [PATCH V7 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana
• [PATCH V7 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana
• [PATCH V7 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana
• [PATCH V7 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana
• [PATCH V7 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana
• Re: [PATCH V6 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana
• Re: [PATCH] serial: 8250: Enable 16550A variants by default on non-x86
  • From: Greg Kroah-Hartman
• [PATCH] serial: 8250: Enable 16550A variants by default on non-x86
  • From: Josh Triplett
• Re: [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Josh Triplett
• Re: [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Maxim Kochetkov
• Re: [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Josh Triplett
• Re: [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Vladimir Oltean
• Re: [PATCH] 16C950 UART enable Hardware Flow Control
  • From: Denis Ahrens
• Re: [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Josh Triplett
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• [PATCH v6] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Andy Shevchenko
• Re: [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Greg Kroah-Hartman
• Re: [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Andy Shevchenko
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• Re: [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Guenter Roeck
• Re: [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Greg Kroah-Hartman
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Arnd Bergmann
• Re: [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Guenter Roeck
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Guenter Roeck
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Andy Shevchenko
• Re: [RFC PATCH v2 0/3] Prefer working VT console over SPCR and device-tree chosen stdout-path
  • From: Petr Mladek
• [PATCH] serial: 8250: probe all 16550A variants by default
  • From: Vladimir Oltean
• [PATCH v1] serial: imx: Initialize lock for non-registered console
  • From: Andy Shevchenko
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Andy Shevchenko
• [RFC PATCH v4] GCOV: profile by modules
  • From: gengcixi
• Re: [PATCH] 16C950 UART enable Hardware Flow Control
  • From: Johan Hovold
• Re: [PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
  • From: Johan Hovold
• Re: [PATCH v3 2/6] serial: core: Allow detach and attach serial device for console
  • From: Guenter Roeck
• [PATCH] 16C950 UART enable Hardware Flow Control
  • From: Denis Ahrens
• Re: Hardwore FlowControl for 16C950 is not activated
  • From: Greg KH
• Hardwore FlowControl for 16C950 is not activated
  • From: Denis Ahrens
• Re: [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• [tty:tty-testing] BUILD SUCCESS 2aa916e67db3e625cc0bfe577f67034a46f81c8a
  • From: kbuild test robot
• Re: [RFC PATCH v2 1/3] printk: Add function to set console to preferred console's driver
  • From: Daniel Vetter
• Re: [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• Re: [PATCH V6 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: kbuild test robot
• Re: [GIT PULL] TTY/Serial driver fix for 5.7-rc7
  • From: pr-tracker-bot
• Re: [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Maciej W. Rozycki
• [PATCH v5] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Ivan Kokshaysky
• [GIT PULL] TTY/Serial driver fix for 5.7-rc7
  • From: Greg KH
• Re: [PATCH v3 0/6] sc16is7xx: IrDA mode and threaded IRQs
  • From: Daniel Mack
• Re: [PATCH 2/2 v4] alpha: add a delay before serial port read
  • From: Mikulas Patocka
• [PATCH v4] alpha: fix memory barriers so that they conform to the specification
  • From: Mikulas Patocka
• Re: [PATCH V6 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: kbuild test robot
• Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
  • From: Mikulas Patocka
• Re: [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: kbuild test robot
• Re: [PATCH v2] serial: kgdboc: Allow earlycon initialization to be deferred
  • From: Daniel Thompson
• Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
  • From: Maciej W. Rozycki
• Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
  • From: Mikulas Patocka
• Re: [PATCH V5] serial: msm_geni_serial_console : Add Earlycon support
  • From: Greg KH
• Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
  • From: Mikulas Patocka
• [PATCH V5] serial: msm_geni_serial_console : Add Earlycon support
  • From: Mukesh, Savaliya
• Re: [PATCH V4] serial: msm_geni_serial_console : Add Earlycon support
  • From: Mukesh, Savaliya
• Re: [RFC][PATCH V3] GCOV: profile by modules
  • From: Cixi Geng
• Re: [PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 0/6] sc16is7xx: IrDA mode and threaded IRQs
  • From: Greg KH
• Re: [RFC][PATCH V3] GCOV: profile by modules
  • From: Greg KH
• [RFC][PATCH V3] GCOV: profile by modules
  • From: gengcixi
• Generic CONFIG_SERIAL_DEV_CTRL_TTYPORT to be disabled to enable BBB overlay /dev/ttySC0
  • From: Zoran Stojsavljevic
• Re: [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Matthias Kaehlcke
• Re: [PATCH v2] serial: kgdboc: Allow earlycon initialization to be deferred
  • From: Doug Anderson
• Re: [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Matthias Kaehlcke
• Re: [PATCH V6 1/7] soc: qcom: geni: Support for ICC voting
  • From: Matthias Kaehlcke
• Re: [PATCH 2/4] arm: dts: mt2712: add uart APDMA to device tree
  • From: Matthias Brugger
• [PATCH v3 5/6] sc16is7xx: Allow sharing the IRQ line
  • From: Daniel Mack
• [PATCH v3 6/6] sc16is7xx: Read the LSR register for basic device presence check
  • From: Daniel Mack
• [PATCH v3 4/6] sc16is7xx: Use threaded IRQ
  • From: Daniel Mack
• [PATCH v3 3/6] sc16is7xx: Always use falling edge IRQ
  • From: Daniel Mack
• [PATCH v3 2/6] sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• [PATCH v3 1/6] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• [PATCH v3 0/6] sc16is7xx: IrDA mode and threaded IRQs
  • From: Daniel Mack
• Re: [PATCH v2 2/6] sc16is7xx: Add flag to activate IrDA mode
  • From: Greg KH
• Re: [PATCH V6 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Greg KH
• [PATCH V6 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana
• [PATCH V6 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana
• [PATCH V6 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana
• [PATCH V6 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana
• [PATCH V6 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana
• [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana
• [PATCH V6 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana
• [PATCH V6 0/7] [PATCH V5 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana
• [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
  • From: Erwan Le Ray
• [PATCH 2/2] serial: stm32: Use generic DT binding for announcing RTS/CTS lines
  • From: Erwan Le Ray
• [PATCH 0/2] add generic DT binding for RTS/CTS
  • From: Erwan Le Ray
• Re: [PATCH] kgdboc: Disable all the early code when kgdboc is a module
  • From: Daniel Thompson
• Re: [RFC][PATCH V2] GCOV: profile by modules
  • From: Cixi Geng
• Re: [RFC][PATCH V2] GCOV: profile by modules
  • From: Cixi Geng
• Re: [RFC][PATCH V2] GCOV: profile by modules
  • From: Greg KH
• Re: [RFC][PATCH V2] GCOV: profile by modules
  • From: Greg KH
• [RFC][PATCH V2] GCOV: profile by modules
  • From: gengcixi
• [tty:tty-testing] BUILD SUCCESS 4dd31f1ffec6c370c3c2e0c605628bf5e16d5c46
  • From: kbuild test robot
• Re: [PATCH] kgdboc: Disable all the early code when kgdboc is a module
  • From: Daniel Thompson
• [PATCH v2 6/6] sc16is7xx: Read the LSR register for basic device presence check
  • From: Daniel Mack
• [PATCH v2 5/6] sc16is7xx: Allow sharing the IRQ line
  • From: Daniel Mack
• [PATCH v2 4/6] sc16is7xx: Use threaded IRQ
  • From: Daniel Mack
• [PATCH v2 2/6] sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• [PATCH v2 3/6] sc16is7xx: Always use falling edge IRQ
  • From: Daniel Mack
• [PATCH v2 0/6] sc16is7xx: IrDA mode and threaded IRQs
  • From: Daniel Mack
• [PATCH v2 1/6] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• Re: [PATCH 4/4] sc16is7xx: Use threaded IRQ
  • From: Daniel Mack
• Re: [PATCH 4/4] sc16is7xx: Use threaded IRQ
  • From: Maarten Brock
• [PATCH] kgdboc: Disable all the early code when kgdboc is a module
  • From: Douglas Anderson
• Re: [PATCH V4] serial: msm_geni_serial_console : Add Earlycon support
  • From: Greg KH
• Re: [PATCH] dt-bindings: serial: Add renesas,em-uart bindings
  • From: Niklas Söderlund
• [PATCH V4] serial: msm_geni_serial_console : Add Earlycon support
  • From: Mukesh, Savaliya
• Re: [PATCH V3] serial: msm_geni_serial_console : Add Earlycon support
  • From: Mukesh, Savaliya
• Re: [PATCH 1/4] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Maarten Brock
• Re: [PATCH v4 00/12] kgdb: Support late serial drivers; enable early debug w/ boot consoles
  • From: Daniel Thompson
• Re: [PATCH v4 00/12] kgdb: Support late serial drivers; enable early debug w/ boot consoles
  • From: Daniel Thompson
• [PATCH 1/1] serial: stm32: add no_console_suspend support
  • From: Erwan Le Ray
• [PATCH] dt-bindings: serial: Add renesas,em-uart bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v10 3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers
  • From: Jiri Slaby
• Re: [PATCH 1/4] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Daniel Mack
• Re: [PATCH v1] dt-bindings: serial: qca,ar9330-uart: Convert to json-schema
  • From: Rob Herring
• Re: [PATCH 1/4] dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  • From: Rob Herring
• Re: [PATCH v3 3/5] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Andy Shevchenko
• Re: [PATCH v3 3/5] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Maarten Brock
• Re: [PATCH 4/4] sc16is7xx: Use threaded IRQ
  • From: Daniel Mack
• Re: [PATCH v4 03/12] kgdboc: Use a platform device to handle tty drivers showing up late
  • From: Daniel Thompson
• Re: [PATCH v3 3/5] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Andy Shevchenko
• Re: [PATCH v3 3/5] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Maarten Brock