[PATCHv2] serial: 8250: change lock order in serial8250_do_startup()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We have a number of "uart.port->desc.lock vs desc.lock->uart.port"
lockdep reports coming from 8250 driver; this causes a bit of trouble
to people, so let's fix it.

The problem is reverse lock order in two different call paths:

chain #1:

 serial8250_do_startup()
  spin_lock_irqsave(&port->lock);
   disable_irq_nosync(port->irq);
    raw_spin_lock_irqsave(&desc->lock)

chain #2:

  __report_bad_irq()
   raw_spin_lock_irqsave(&desc->lock)
    for_each_action_of_desc()
     printk()
      spin_lock_irqsave(&port->lock);

Fix this by changing the order of locks in serial8250_do_startup():
 do disable_irq_nosync() first, which grabs desc->lock, and grab
 uart->port after that, so that chain #1 and chain #2 have same lock
 order.

Full lockdep splat:

 ======================================================
 WARNING: possible circular locking dependency detected
 5.4.39 #55 Not tainted
 ======================================================

 swapper/0/0 is trying to acquire lock:
 ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57

 but task is already holding lock:
 ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 (&irq_desc_lock_class){-.-.}:
        _raw_spin_lock_irqsave+0x61/0x8d
        __irq_get_desc_lock+0x65/0x89
        __disable_irq_nosync+0x3b/0x93
        serial8250_do_startup+0x451/0x75c
        uart_startup+0x1b4/0x2ff
        uart_port_activate+0x73/0xa0
        tty_port_open+0xae/0x10a
        uart_open+0x1b/0x26
        tty_open+0x24d/0x3a0
        chrdev_open+0xd5/0x1cc
        do_dentry_open+0x299/0x3c8
        path_openat+0x434/0x1100
        do_filp_open+0x9b/0x10a
        do_sys_open+0x15f/0x3d7
        kernel_init_freeable+0x157/0x1dd
        kernel_init+0xe/0x105
        ret_from_fork+0x27/0x50

 -> #1 (&port_lock_key){-.-.}:
        _raw_spin_lock_irqsave+0x61/0x8d
        serial8250_console_write+0xa7/0x2a0
        console_unlock+0x3b7/0x528
        vprintk_emit+0x111/0x17f
        printk+0x59/0x73
        register_console+0x336/0x3a4
        uart_add_one_port+0x51b/0x5be
        serial8250_register_8250_port+0x454/0x55e
        dw8250_probe+0x4dc/0x5b9
        platform_drv_probe+0x67/0x8b
        really_probe+0x14a/0x422
        driver_probe_device+0x66/0x130
        device_driver_attach+0x42/0x5b
        __driver_attach+0xca/0x139
        bus_for_each_dev+0x97/0xc9
        bus_add_driver+0x12b/0x228
        driver_register+0x64/0xed
        do_one_initcall+0x20c/0x4a6
        do_initcall_level+0xb5/0xc5
        do_basic_setup+0x4c/0x58
        kernel_init_freeable+0x13f/0x1dd
        kernel_init+0xe/0x105
        ret_from_fork+0x27/0x50

 -> #0 (console_owner){-...}:
        __lock_acquire+0x118d/0x2714
        lock_acquire+0x203/0x258
        console_lock_spinning_enable+0x51/0x57
        console_unlock+0x25d/0x528
        vprintk_emit+0x111/0x17f
        printk+0x59/0x73
        __report_bad_irq+0xa3/0xba
        note_interrupt+0x19a/0x1d6
        handle_irq_event_percpu+0x57/0x79
        handle_irq_event+0x36/0x55
        handle_fasteoi_irq+0xc2/0x18a
        do_IRQ+0xb3/0x157
        ret_from_intr+0x0/0x1d
        cpuidle_enter_state+0x12f/0x1fd
        cpuidle_enter+0x2e/0x3d
        do_idle+0x1ce/0x2ce
        cpu_startup_entry+0x1d/0x1f
        start_kernel+0x406/0x46a
        secondary_startup_64+0xa4/0xb0

 other info that might help us debug this:

 Chain exists of:
   console_owner --> &port_lock_key --> &irq_desc_lock_class

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&irq_desc_lock_class);
                                lock(&port_lock_key);
                                lock(&irq_desc_lock_class);
   lock(console_owner);

  *** DEADLOCK ***

 2 locks held by swapper/0/0:
  #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba
  #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181

 stack backtrace:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55
 Hardware name: XXXXXX
 Call Trace:
  <IRQ>
  dump_stack+0xbf/0x133
  ? print_circular_bug+0xd6/0xe9
  check_noncircular+0x1b9/0x1c3
  __lock_acquire+0x118d/0x2714
  lock_acquire+0x203/0x258
  ? console_lock_spinning_enable+0x31/0x57
  console_lock_spinning_enable+0x51/0x57
  ? console_lock_spinning_enable+0x31/0x57
  console_unlock+0x25d/0x528
  ? console_trylock+0x18/0x4e
  vprintk_emit+0x111/0x17f
  ? lock_acquire+0x203/0x258
  printk+0x59/0x73
  __report_bad_irq+0xa3/0xba
  note_interrupt+0x19a/0x1d6
  handle_irq_event_percpu+0x57/0x79
  handle_irq_event+0x36/0x55
  handle_fasteoi_irq+0xc2/0x18a
  do_IRQ+0xb3/0x157
  common_interrupt+0xf/0xf
  </IRQ>

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
Fixes: 768aec0b5bcc ("serial: 8250: fix shared interrupts issues with SMP and RT kernels")
Reported-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Reported-by: Raul Rangel <rrangel@xxxxxxxxxx>
BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800
Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@xxxxxxxxxxxxxx/T/#u
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Tested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---

v2: nitpicks and style cleanups (Andy)

 drivers/tty/serial/8250/8250_port.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 09475695effd..e7882611da0e 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2275,6 +2275,10 @@ int serial8250_do_startup(struct uart_port *port)
 
 	if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
 		unsigned char iir1;
+
+		if (port->irqflags & IRQF_SHARED)
+			disable_irq_nosync(port->irq);
+
 		/*
 		 * Test for UARTs that do not reassert THRE when the
 		 * transmitter is idle and the interrupt has already
@@ -2284,8 +2288,6 @@ int serial8250_do_startup(struct uart_port *port)
 		 * allow register changes to become visible.
 		 */
 		spin_lock_irqsave(&port->lock, flags);
-		if (up->port.irqflags & IRQF_SHARED)
-			disable_irq_nosync(port->irq);
 
 		wait_for_xmitr(up, UART_LSR_THRE);
 		serial_port_out_sync(port, UART_IER, UART_IER_THRI);
@@ -2297,9 +2299,10 @@ int serial8250_do_startup(struct uart_port *port)
 		iir = serial_port_in(port, UART_IIR);
 		serial_port_out(port, UART_IER, 0);
 
+		spin_unlock_irqrestore(&port->lock, flags);
+
 		if (port->irqflags & IRQF_SHARED)
 			enable_irq(port->irq);
-		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
 		 * If the interrupt is not reasserted, or we otherwise
-- 
2.28.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux