Indeed according to the clk API if clk_round_rate() has successfully
accepted a rate, then in order setup the clock with value returned by the
clk_round_rate() the clk_set_rate() method must be called with the
original rate value.
Suggested-by: Russell King <linux@xxxxxxxxxxxxxxx>
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
Changelog v8:
- This is a new patch created by the Russell King suggestion.
---
drivers/tty/serial/8250/8250_dw.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 12866083731d..c1511f9244bb 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -275,15 +275,15 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
- unsigned int baud = tty_termios_baud_rate(termios);
+ unsigned long newrate = tty_termios_baud_rate(termios) * 16;
struct dw8250_data *d = to_dw8250_data(p->private_data);
long rate;
int ret;
clk_disable_unprepare(d->clk);
- rate = clk_round_rate(d->clk, baud * 16);
+ rate = clk_round_rate(d->clk, newrate);
if (rate > 0) {
- ret = clk_set_rate(d->clk, rate);
+ ret = clk_set_rate(d->clk, newrate);
if (!ret)
p->uartclk = rate;
}
--
2.26.2
