Linux Serial

• Thread Index

• Re: [PATCH v2 08/14] clk: renesas: rcar-gen4-cpg: Introduce R-Car Gen4 CPG driver
  • From: Geert Uytterhoeven
• Re: [RFC 06/19] devfreq: imx8m-ddrc: Add late system sleep PM ops
  • From: Martin Kepplinger
• RE: [PATCH v2 04/14] dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
  • From: Yoshihiro Shimoda
• RE: [PATCH v2 01/14] dt-bindings: arm: renesas: Document Renesas Spider boards
  • From: Yoshihiro Shimoda
• Re: [PATCH] serial: meson: make the current driver compatible with S4
  • From: Neil Armstrong
• Re: [PATCH v2 06/14] soc: renesas: r8a779f0-sysc: Add r8a779f0 support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 05/14] soc: renesas: rcar-gen4-sysc: Introduce R-Car Gen4 SYSC driver
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype
  • From: Geert Uytterhoeven
• Re: [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: Shawn Guo
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo
• Re: [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: Shawn Guo
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo
• RE: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Peng Fan
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo
• [PATCH] serial: 8250_pci: remove redundant assignment to tmp after the mask operation
  • From: Colin Ian King
• Re: [GIT PULL] TTY/Serial driver fixes for 5.16-rc4
  • From: pr-tracker-bot
• Re: [PATCH v3 0/5] soc: samsung: Add USI driver
  • From: Krzysztof Kozlowski
• [GIT PULL] TTY/Serial driver fixes for 5.16-rc4
  • From: Greg KH
• Re: [PATCH] serial: sh-sci: Use dev_dbg() for frame and parity errors
  • From: Wolfram Sang
• [PATCH/RFC] serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype
  • From: Magnus Damm
• Re: [PATCH] serial: sh-sci: Use dev_dbg() for frame and parity errors
  • From: Magnus Damm
• [PATCH v3 5/5] tty: serial: samsung: Fix console registration from module
  • From: Sam Protsenko
• [PATCH v3 4/5] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko
• [PATCH v3 2/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• [PATCH v3 3/5] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• [PATCH v3 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• [PATCH v3 0/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• Re: [PATCH] Allow PPS on CTS pin and non-RS232 UARTs
  • From: Mathieu Peyrega
• Re: [PATCH] serial: sh-sci: Use dev_dbg() for frame and parity errors
  • From: Wolfram Sang
• [PATCH] serial: sh-sci: Use dev_dbg() for frame and parity errors
  • From: Magnus Damm
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 RESEND 3/5] tty: serial: samsung: Remove USI initialization
  • From: Krzysztof Kozlowski
• Re: [PATCH v4 00/13] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC.
  • From: Fabio Estevam
• [PATCH v4 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
  • From: Jesse Taube
• [PATCH v4 13/13] ARM: imxrt1050_defconfig: add i.MXRT1050 defconfig
  • From: Jesse Taube
• [PATCH v4 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Jesse Taube
• [PATCH v4 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
  • From: Jesse Taube
• [PATCH v4 09/13] tty: serial: fsl_lpuart: add i.MXRT support
  • From: Jesse Taube
• [PATCH v4 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string
  • From: Jesse Taube
• [PATCH v4 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible
  • From: Jesse Taube
• [PATCH v4 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050
  • From: Jesse Taube
• [PATCH v4 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock
  • From: Jesse Taube
• [PATCH v4 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support
  • From: Jesse Taube
• [PATCH v4 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
  • From: Jesse Taube
• [PATCH v4 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc
  • From: Jesse Taube
• [PATCH v4 01/13] ARM: imx: add initial support for i.MXRT10xx family
  • From: Jesse Taube
• [PATCH v4 00/13] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC.
  • From: Jesse Taube
• [tty:tty-testing] BUILD SUCCESS 13a5fad39a7b781c21d9528bcf52a5f5babafe99
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS 9cabe26e65a893afd5846908aa393bd283ab6609
  • From: kernel test robot
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Rob Herring
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• Re: [PATCH v2 10/14] soc: renesas: rcar-rst: Add support for R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH v2 07/14] soc: renesas: Identify R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH v2 04/14] dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 RESEND 3/5] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• Re: [PATCH v2 03/14] dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
  • From: Geert Uytterhoeven
• Re: [PATCH v2 02/14] dt-bindings: power: Add r8a779f0 SYSC power domain definitions
  • From: Geert Uytterhoeven
• Re: [PATCH v2 01/14] dt-bindings: arm: renesas: Document Renesas Spider boards
  • From: Geert Uytterhoeven
• Re: [PATCH v2 RESEND 2/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• RE: [PATCH v4 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh 謝宏孟
• Re: [PATCH] Allow PPS on CTS pin and non-RS232 UARTs
  • From: Greg KH
• [PATCH V2] tty: serial: fsl_lpuart: add timeout for wait_event_interruptible in .shutdown()
  • From: Sherry Sun
• Re: [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
  • From: Giulio Benetti
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Rob Herring
• Re: [PATCH v4 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] arm64: dts: apple: t8103: Add PMGR nodes
  • From: Sven Peter
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• [PATCH] Allow PPS on CTS pin and non-RS232 UARTs
  • From: Mathieu Peyrega
• Re: [PATCH v3 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
  • From: Linus Walleij
• Re: [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support
  • From: Linus Walleij
• Re: [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc
  • From: Linus Walleij
• Re: [PATCH] serial: 8250_bcm7271: UART errors after resuming from S2
  • From: Florian Fainelli
• [PATCH] serial: 8250_bcm7271: UART errors after resuming from S2
  • From: Al Cooper
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Rob Herring
• Re: [PATCH v2 RESEND 3/5] tty: serial: samsung: Remove USI initialization
  • From: Andy Shevchenko
• Re: [PATCH v2 RESEND 2/5] soc: samsung: Add USI driver
  • From: Andy Shevchenko
• [PATCH v4 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v4 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v4 0/2] Add UART driver for Suplus SP7021 SoC
  • From: Hammer Hsieh
• Re: [RFC 06/19] devfreq: imx8m-ddrc: Add late system sleep PM ops
  • From: Martin Kepplinger
• [PATCH v2 14/14] arm64: defconfig: Enable R-Car S4-8
  • From: Yoshihiro Shimoda
• [PATCH v2 13/14] arm64: dts: renesas: Add Renesas Spider boards support
  • From: Yoshihiro Shimoda
• [PATCH v2 12/14] arm64: dts: renesas: Add Renesas R8A779F0 SoC support
  • From: Yoshihiro Shimoda
• [PATCH v2 11/14] tty: serial: sh-sci: Add support for R-Car Gen4
  • From: Yoshihiro Shimoda
• [PATCH v2 09/14] clk: renesas: cpg-mssr: Add support for R-Car S4-8
  • From: Yoshihiro Shimoda
• [PATCH v2 10/14] soc: renesas: rcar-rst: Add support for R-Car S4-8
  • From: Yoshihiro Shimoda
• [PATCH v2 08/14] clk: renesas: rcar-gen4-cpg: Introduce R-Car Gen4 CPG driver
  • From: Yoshihiro Shimoda
• [PATCH v2 05/14] soc: renesas: rcar-gen4-sysc: Introduce R-Car Gen4 SYSC driver
  • From: Yoshihiro Shimoda
• [PATCH v2 07/14] soc: renesas: Identify R-Car S4-8
  • From: Yoshihiro Shimoda
• [PATCH v2 06/14] soc: renesas: r8a779f0-sysc: Add r8a779f0 support
  • From: Yoshihiro Shimoda
• [PATCH v2 04/14] dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
  • From: Yoshihiro Shimoda
• [PATCH v2 03/14] dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
  • From: Yoshihiro Shimoda
• [PATCH v2 02/14] dt-bindings: power: Add r8a779f0 SYSC power domain definitions
  • From: Yoshihiro Shimoda
• [PATCH v2 01/14] dt-bindings: arm: renesas: Document Renesas Spider boards
  • From: Yoshihiro Shimoda
• [PATCH v2 00/14] treewide: Initial support for R-Car S4-8
  • From: Yoshihiro Shimoda
• Re: [RFC 06/19] devfreq: imx8m-ddrc: Add late system sleep PM ops
  • From: Abel Vesa
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Rob Herring
• Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Rob Herring
• Re: [PATCH v3 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
  • From: Ulf Hansson
• Re: [PATCH v3 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string
  • From: Ulf Hansson
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Dmitry Osipenko
• [PATCH v2 RESEND 5/5] tty: serial: samsung: Fix console registration from module
  • From: Sam Protsenko
• [PATCH v2 RESEND 4/5] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko
• [PATCH v2 RESEND 3/5] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• [PATCH v2 RESEND 2/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• [PATCH v2 RESEND 0/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• Re: [PATCH 7/7] serial: 8250_port: Remove calls to runtime PM
  • From: Johan Hovold
• Re: [PATCH 6/7] serial: 8250_omap: Drop the use of pm_runtime_irq_safe()
  • From: Johan Hovold
• Re: [PATCH 5/7] serial: 8250_omap: Require a valid wakeirq for deeper idle states
  • From: Johan Hovold
• Re: [PATCH 4/7] serial: 8250: Implement wakeup for TX and use it for 8250_omap
  • From: Johan Hovold
• Re: [PATCH 3/7] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Johan Hovold
• Re: [PATCH 2/7] serial: core: Add wakeup() and start_pending_tx() for asynchronous wake
  • From: Johan Hovold
• [PATCH V1] tty: serial: fsl_lpuart: add timeout for wait_event_interruptible in .shutdown()
  • From: Sherry Sun
• Re: [PATCH 1/7] serial: core: Add support of runtime PM
  • From: Johan Hovold
• Re: [PATCHv4 0/7] Serial port generic PM to fix 8250 PM
  • From: Johan Hovold
• Re: Question: how to handle tty output buffer
  • From: Greg KH
• Re: [PATCH v2 2/5] soc: samsung: Add USI driver
  • From: Krzysztof Kozlowski
• Question: how to handle tty output buffer
  • From: chaozeng
• Re: [PATCH v2 2/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• [PATCH v2 5/5] tty: serial: samsung: Fix console registration from module
  • From: Sam Protsenko
• [PATCH v2 4/5] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko
• [PATCH v2 3/5] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• [PATCH v2 2/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• [PATCH v2 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
  • From: Sam Protsenko
• [PATCH v2 0/5] soc: samsung: Add USI driver
  • From: Sam Protsenko
• Re: [PATCH] dt-bindings: Add resets to the PL011 bindings
  • From: Rob Herring
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: David Virag
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko
• Re: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Rob Herring
• [PATCH 1/1] tty: serial: uartlite: allow 64 bit address
  • From: Lizhi Hou
• [PATCH v2] serial: amba-pl011: do not request memory region twice
  • From: Lino Sanfilippo
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Dmitry Osipenko
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Dmitry Osipenko
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Dmitry Osipenko
• Re: [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: Daniel Lezcano
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski
• Re: [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
  • From: Wolfram Sang
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Krzysztof Kozlowski
• Re: [PATCH 3/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski
• Re: [PATCH 12/16] clk: renesas: cpg-mssr: Add support for R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: Wolfram Sang
• RE: [PATCH 12/16] clk: renesas: cpg-mssr: Add support for R-Car S4-8
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig
  • From: Jesse Taube
• Re: [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig
  • From: Giulio Benetti
• Re: [PATCH v3 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
  • From: Rob Herring
• Re: [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc
  • From: Rob Herring
• Re: [PATCH v3 05/11] dt-bindings: interrupt-controller: apple,aic: Add power-domains property
  • From: Rob Herring
• Re: [PATCH v3 04/11] dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
  • From: Rob Herring
• Re: [PATCH v3 03/11] dt-bindings: iommu: apple,dart: Add power-domains property
  • From: Rob Herring
• Re: [PATCH v3 02/11] dt-bindings: i2c: apple,i2c: Add power-domains property
  • From: Rob Herring
• Re: [PATCH v3 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
  • From: Rob Herring
• Re: [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko
• Re: [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko
• Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko
• Re: [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Giulio Benetti
• Re: [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Fabio Estevam
• Re: [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Jesse Taube
• Re: [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Fabio Estevam
• Re: [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Jesse Taube
• Re: [PATCH v3 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
  • From: Fabio Estevam
• Re: [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Fabio Estevam
• Re: [PATCH v3 09/13] tty: serial: fsl_lpuart: add i.MXRT support
  • From: Fabio Estevam
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Emil Renner Berthing
• Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• Re: [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
  • From: Jesse Taube
• Re: [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
  • From: Rob Herring
• Re: [PATCH v3 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string
  • From: Rob Herring
• Re: [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock
  • From: Rob Herring
• Re: [PATCH v3 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible
  • From: Rob Herring
• Re: [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050
  • From: Rob Herring
• Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• Re: [PATCH v3 07/11] dt-bindings: arm: apple: Add apple,pmgr binding
  • From: Rob Herring
• Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Greg Kroah-Hartman
• Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: David Virag
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Michał Mirosław
• [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko
• [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko
• [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko
• [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko
• [PATCH 3/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko
• [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko
• [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc
  • From: Sam Protsenko
• [PATCH 1/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings
  • From: Sam Protsenko
• [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko
• Re: [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support
  • From: Fabio Estevam
• [tty:tty-testing] BUILD SUCCESS 3f19fed8d0daed6e0e04b130d203d4333b757901
  • From: kernel test robot
• Re: [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support
  • From: Linus Walleij
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Palmer Dabbelt
• Re: Serial_DMA issue discussion
  • From: wigin zeng
• Re: Serial_DMA issue discussion
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] serial: amba-pl011: do not request memory region twice
  • From: Lino Sanfilippo
• Re: [PATCH] serial: amba-pl011: do not request memory region twice
  • From: Russell King (Oracle)
• Re: [PATCH] serial: amba-pl011: do not request memory region twice
  • From: Lino Sanfilippo
• Re: [PATCHv4 0/7] Serial port generic PM to fix 8250 PM
  • From: Andy Shevchenko
• Re: [PATCH 00/23] tty: documentation revamp
  • From: Greg KH
• Re: [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Maarten Brock
• Re: [PATCH] serial: amba-pl011: do not request memory region twice
  • From: Greg KH
• Re: [PATCH] dt-bindings: Add resets to the PL011 bindings
  • From: Greg Kroah-Hartman
• [PATCH] serial: amba-pl011: do not request memory region twice
  • From: Lino Sanfilippo
• Re: [PATCH v2] serial-uartlite: Remove an un-necessary read of control register
  • From: Maarten Brock
• [PATCH 23/23] Documentation: add TTY chapter
  • From: Jiri Slaby
• [PATCH 22/23] tty: add kernel-doc for tty_standard_install
  • From: Jiri Slaby
• [PATCH 21/23] tty: more kernel-doc for tty_ldisc
  • From: Jiri Slaby
• [PATCH 20/23] tty: make tty_ldisc docs up-to-date
  • From: Jiri Slaby
• [PATCH 18/23] tty: add kernel-doc for more tty_port functions
  • From: Jiri Slaby
• [PATCH 14/23] tty: reformat kernel-doc in tty_buffer.c
  • From: Jiri Slaby
• [PATCH 19/23] tty: move tty_ldisc docs to new Documentation/tty/
  • From: Jiri Slaby
• [PATCH 13/23] tty: reformat kernel-doc in tty_ldisc.c
  • From: Jiri Slaby
• [PATCH 16/23] tty: reformat kernel-doc in n_tty.c
  • From: Jiri Slaby
• [PATCH 15/23] tty: fix kernel-doc in n_tty.c
  • From: Jiri Slaby
• [PATCH 11/23] tty: reformat kernel-doc in tty_port.c
  • From: Jiri Slaby
• [PATCH 17/23] tty: add kernel-doc for more tty_driver functions
  • From: Jiri Slaby
• [PATCH 12/23] tty: reformat kernel-doc in tty_io.c
  • From: Jiri Slaby
• [PATCH 09/23] tty: reformat tty_struct::flags into kernel-doc
  • From: Jiri Slaby
• [PATCH 04/23] tty: add kernel-doc for tty_operations
  • From: Jiri Slaby
• [PATCH 05/23] tty: add kernel-doc for tty_port_operations
  • From: Jiri Slaby
• [PATCH 06/23] tty: add kernel-doc for tty_ldisc_ops
  • From: Jiri Slaby
• [PATCH 08/23] tty: combine tty_ldisc_ops docs into kernel-doc
  • From: Jiri Slaby
• [PATCH 07/23] tty: combine tty_operations triple docs into kernel-doc
  • From: Jiri Slaby
• [PATCH 10/23] tty: reformat TTY_DRIVER_ flags into kernel-doc
  • From: Jiri Slaby
• [PATCH 02/23] tty: add kernel-doc for tty_port
  • From: Jiri Slaby
• [PATCH 01/23] tty: finish kernel-doc of tty_struct members
  • From: Jiri Slaby
• [PATCH 03/23] tty: add kernel-doc for tty_driver
  • From: Jiri Slaby
• [PATCH 00/23] tty: documentation revamp
  • From: Jiri Slaby
• [PATCH V6 4/7] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: Peng Fan (OSS)
• [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V6 2/7] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: Peng Fan (OSS)
• [PATCH V6 0/7] dt-bindinds/dts: support i.MX8ULP
  • From: Peng Fan (OSS)
• [tty:tty-linus] BUILD SUCCESS bb1201d4b38ec67bd9a871cf86b0cc10f28b15b5
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS 693a622b08ccbd0f0f38695664a4428b712babea
  • From: kernel test robot
• Re: [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig
  • From: Jesse Taube
• Re: [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig
  • From: Arnd Bergmann
• [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig
  • From: Jesse Taube
• [PATCH v3 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
  • From: Jesse Taube
• [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
  • From: Jesse Taube
• [PATCH v3 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string
  • From: Jesse Taube
• [PATCH v3 09/13] tty: serial: fsl_lpuart: add i.MXRT support
  • From: Jesse Taube
• [PATCH v3 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible
  • From: Jesse Taube
• [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver
  • From: Jesse Taube
• [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock
  • From: Jesse Taube
• [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050
  • From: Jesse Taube
• [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support
  • From: Jesse Taube
• [PATCH v3 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
  • From: Jesse Taube
• [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc
  • From: Jesse Taube
• [PATCH v3 00/13] add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC.
  • From: Jesse Taube
• [PATCH v3 01/13] ARM: imx: add initial support for i.MXRT10xx family
  • From: Jesse Taube
• Re: [PATCH 1/3] serial: 8250_pci: rewrite pericom_do_set_divisor
  • From: Greg KH
• Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Alexander Stein
• RE: [PATCH 1/1] Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
  • From: Peng Fan
• Re: (EXT) Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa
• Re: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Wolfram Sang
• RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Peng Fan
• RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Peng Fan
• [PATCH v2 13/13] dmaengine: at_xdmac: Fix race over irq_status
  • From: Tudor Ambarus
• [PATCH v2 10/13] dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
  • From: Tudor Ambarus
• [PATCH v2 12/13] dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
  • From: Tudor Ambarus
• [PATCH v2 11/13] dmaengine: at_xdmac: Fix lld view setting
  • From: Tudor Ambarus
• [PATCH v2 09/13] dmaengine: at_xdmac: Fix concurrency over xfers_list
  • From: Tudor Ambarus
• [PATCH v2 08/13] dmaengine: at_xdmac: Move the free desc to the tail of the desc list
  • From: Tudor Ambarus
• [PATCH v2 07/13] dmaengine: at_xdmac: Fix race for the tx desc callback
  • From: Tudor Ambarus
• [PATCH v2 06/13] dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
  • From: Tudor Ambarus
• [PATCH v2 05/13] dmaengine: at_xdmac: Print debug message after realeasing the lock
  • From: Tudor Ambarus
• [PATCH v2 04/13] dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
  • From: Tudor Ambarus
• [PATCH v2 02/13] tty: serial: atmel: Check return code of dmaengine_submit()
  • From: Tudor Ambarus
• [PATCH v2 03/13] tty: serial: atmel: Call dma_async_issue_pending()
  • From: Tudor Ambarus
• [PATCH v2 01/13] dmaengine: at_xdmac: Don't start transactions at tx_submit level
  • From: Tudor Ambarus
• [PATCH v2 00/13] dmaengine: at_xdmac: Various fixes
  • From: Tudor Ambarus
• [PATCH V3] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sherry Sun
• [PATCH V3] tty: serial: imx: clear the RTSD status before enable the RTSD irq
  • From: Sherry Sun
• Re: [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
  • From: Dmitry Osipenko
• Re: [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
  • From: Dmitry Osipenko
• Re: [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
  • From: Arnd Bergmann
• Re: [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
  • From: Dmitry Osipenko
• Re: [PATCH 15/16] arm64: dts: renesas: Add Renesas Spider boards support
  • From: Geert Uytterhoeven
• Re: [PATCH v2] serial-uartlite: Remove an un-necessary read of control register
  • From: Greg KH
• Re: [PATCH v3] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Greg KH
• Re: [PATCH 16/16] arm64: defconfig: Enable R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH 14/16] arm64: dts: renesas: Add Renesas R8A779F0 SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH 12/16] clk: renesas: cpg-mssr: Add support for R-Car S4-8
  • From: Geert Uytterhoeven
• RE: [PATCH v2] serial-uartlite: Remove an un-necessary read of control register
  • From: Shubhrajyoti Datta
• Re: [PATCH v3] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Ruediger Willenberg
• RE: [PATCH V2] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sherry Sun
• Re: [PATCH V2] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Greg KH
• RE: [PATCH V2] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sherry Sun
• Re: [PATCH v3] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Greg KH
• Re: [PATCH v2] serial-uartlite: Remove an un-necessary read of control register
  • From: Greg KH
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Greg KH
• Re: [PATCH V2] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Greg KH
• Re: [PATCH 1/1] tty: serial: uartlite: allow 64 bit address
  • From: Greg KH
• [PATCH v3 11/11] arm64: dts: apple: t8103: Add UART2
  • From: Hector Martin
• [PATCH v3 10/11] tty: serial: samsung_tty: Support runtime PM
  • From: Hector Martin
• [PATCH v3 09/11] arm64: dts: apple: t8103: Add PMGR nodes
  • From: Hector Martin
• [PATCH v3 08/11] soc: apple: Add driver for Apple PMGR power state controls
  • From: Hector Martin
• [PATCH v3 07/11] dt-bindings: arm: apple: Add apple,pmgr binding
  • From: Hector Martin
• [PATCH v3 06/11] dt-bindings: power: Add apple,pmgr-pwrstate binding
  • From: Hector Martin
• [PATCH v3 05/11] dt-bindings: interrupt-controller: apple,aic: Add power-domains property
  • From: Hector Martin
• [PATCH v3 04/11] dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
  • From: Hector Martin
• [PATCH v3 03/11] dt-bindings: iommu: apple,dart: Add power-domains property
  • From: Hector Martin
• [PATCH v3 02/11] dt-bindings: i2c: apple,i2c: Add power-domains property
  • From: Hector Martin
• [PATCH v3 01/11] MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE
  • From: Hector Martin
• [PATCH v3 00/11] Apple SoC PMGR device power states driver
  • From: Hector Martin
• [PATCH 1/1] Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
  • From: Alexander Stein
• RE: [PATCH 10/16] soc: renesas: r8a779f0-sysc: Add r8a779f0 support
  • From: Yoshihiro Shimoda
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• Re: [PATCH 1/1] tty: serial: uartlite: allow 64 bit address
  • From: Lizhi Hou
• Re: [PATCH 1/1] tty: serial: uartlite: allow 64 bit address
  • From: Greg KH
• [PATCH 1/1] tty: serial: uartlite: allow 64 bit address
  • From: Lizhi Hou
• Re: [PATCH 10/16] soc: renesas: r8a779f0-sysc: Add r8a779f0 support
  • From: Geert Uytterhoeven
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Michal Simek
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• Re: [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Rüdiger Willenberg
• [PATCH v3] serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
  • From: Patrik John
• [PATCH v2] serial-uartlite: Remove an un-necessary read of control register
  • From: Shubhrajyoti Datta
• Re: [PATCH V2] tty: serial: imx: clear the RTSD status before enable the RTSD irq
  • From: Uwe Kleine-König
• Re: [PATCH V2] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Uwe Kleine-König
• Re: [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Michal Simek
• Re: [PATCH v3] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Michal Simek
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Michal Simek
• Re: [PATCH v2 04/11] mmc: bcm2835: stop setting chan_config->slave_id
  • From: Ulf Hansson
• [PATCH V2] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sherry Sun
• [PATCH V2] tty: serial: imx: clear the RTSD status before enable the RTSD irq
  • From: Sherry Sun
• RE: [PATCH] tty: serial: imx: clear RTSD status before suspend
  • From: Sherry Sun
• Re: [PATCH] tty: serial: imx: clear RTSD status before suspend
  • From: Uwe Kleine-König
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• RE: [PATCH] tty: serial: imx: disable UCR4_OREN in .stop_rx()
  • From: Sherry Sun
• Re: [PATCH v2 3/3] serial: 8250_pericom: Use serial_dl_write() instead of open coded
  • From: Andy Shevchenko
• Re: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
  • From: Wolfram Sang
• Re: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
  • From: Wolfram Sang
• Re: [PATCH] tty: serial: imx: disable UCR4_OREN in .stop_rx()
  • From: Uwe Kleine-König
• RE: [PATCH] tty: serial: imx: clear RTSD status before suspend
  • From: Sherry Sun
• Re: [PATCH] tty: serial: imx: disable UCR4_OREN in .stop_rx()
  • From: Uwe Kleine-König
• Re: [PATCH] tty: serial: imx: clear RTSD status before suspend
  • From: Uwe Kleine-König
• Re: (EXT) Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Alexander Stein
• [PATCH] tty: serial: imx: disable UCR4_OREN in .stop_rx()
  • From: Sherry Sun
• [PATCH] tty: serial: imx: clear RTSD status before suspend
  • From: Sherry Sun
• Re: [PATCH v2 3/3] serial: 8250_pericom: Use serial_dl_write() instead of open coded
  • From: Jay Dolan
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• RE: [PATCH v2 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
  • From: Bough Chen
• RE: [PATCH v3 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh 謝宏孟
• Re: [PATCH v2 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
  • From: Jesse Taube
• Re: (subset) [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Mark Brown
• Re: [PATCH v2 00/11] dmaengine: kill off dma_slave_config->slave_id
  • From: Mark Brown
• [PATCH v2 10/11] dmaengine: tegra20-apb: stop checking config->slave_id
  • From: Arnd Bergmann
• [PATCH v2 11/11] dmaengine: remove slave_id config field
  • From: Arnd Bergmann
• [PATCH v2 09/11] dmaengine: xilinx_dpdma: stop using slave_id field
  • From: Arnd Bergmann
• [PATCH v2 08/11] dmaengine: qcom-adm: stop abusing slave_id config
  • From: Arnd Bergmann
• [PATCH v2 07/11] dmaengine: sprd: stop referencing config->slave_id
  • From: Arnd Bergmann
• [PATCH v2 06/11] dmaengine: pxa/mmp: stop referencing config->slave_id
  • From: Arnd Bergmann
• [PATCH v2 05/11] dmaengine: shdma: remove legacy slave_id parsing
  • From: Arnd Bergmann
• [PATCH v2 04/11] mmc: bcm2835: stop setting chan_config->slave_id
  • From: Arnd Bergmann
• [PATCH v2 03/11] spi: pic32: stop setting dma_config->slave_id
  • From: Arnd Bergmann
• [PATCH v2 02/11] ASoC: dai_dma: remove slave_id field
  • From: Arnd Bergmann
• [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
  • From: Arnd Bergmann
• [PATCH v2 00/11] dmaengine: kill off dma_slave_config->slave_id
  • From: Arnd Bergmann
• [PATCH v3] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Ruediger Willenberg
• Re: [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Ruediger Willenberg
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Ruediger Willenberg
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Lukas Wunner
• Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa
• Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa
• [PATCH] serial: 8250: Fix RTS modem control while in rs485 mode
  • From: Lukas Wunner
• Re: [PATCH v3 11/16] dt-bindings: pinctrl: Add StarFive JH7100 bindings
  • From: Emil Renner Berthing
• [PATCH v2 3/3] serial: 8250_pericom: Use serial_dl_write() instead of open coded
  • From: Andy Shevchenko
• [PATCH v2 2/3] serial: 8250_pericom: Re-enable higher baud rates
  • From: Andy Shevchenko
• [PATCH v2 1/3] serial: 8250_pci: Split out Pericom driver
  • From: Andy Shevchenko
• [PATCH v2 0/3] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Greg KH
• Re: [PATCH v2 0/3] tty: drop tty_schedule_flip()
  • From: Johan Hovold
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• [PATCH] serial: tegra: Fixes lower tolerance baud rate limit for older tegra chips introduced by d781ec21bae6
  • From: Patrik John
• Re: [PATCH] serial: tegra: Fixes lower tolerance baud limit for older tegra chips introduced by d781ec21bae6
  • From: Greg KH
• [PATCH] serial: tegra: Fixes lower tolerance baud limit for older tegra chips introduced by d781ec21bae6
  • From: Patrik John
• [PATCH v3 2/2] serial: 8250_pci: rewrite pericom_do_set_divisor()
  • From: Andy Shevchenko
• [PATCH v3 1/2] serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  • From: Andy Shevchenko
• [PATCH v3 0/2] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Andy Shevchenko
• Re: [PATCH v2 0/2] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Andy Shevchenko
• [PATCH v2 3/3] tty: drop tty_schedule_flip()
  • From: Jiri Slaby
• [PATCH v2 2/3] tty: the rest, stop using tty_schedule_flip()
  • From: Jiri Slaby
• [PATCH v2 1/3] tty: drivers/tty/, stop using tty_schedule_flip()
  • From: Jiri Slaby
• [PATCH v2 0/3] tty: drop tty_schedule_flip()
  • From: Jiri Slaby
• Re: [PATCH v2] tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl
  • From: Marc Kleine-Budde
• [PATCH v2] tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl
  • From: Jiri Slaby
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Su Bao Cheng
• Re: [PATCH v4 12/16] pinctrl: starfive: Add pinctrl driver for StarFive SoCs
  • From: Linus Walleij
• Re: [PATCH v3 11/16] dt-bindings: pinctrl: Add StarFive JH7100 bindings
  • From: Linus Walleij
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Lukas Wunner
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Jan Kiszka
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Lukas Wunner
• [PATCH V5 8/8] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: Peng Fan (OSS)
• [PATCH V5 6/8] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: Peng Fan (OSS)
• [PATCH V5 5/8] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V5 4/8] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V5 3/8] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V5 2/8] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V5 1/8] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: Peng Fan (OSS)
• [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Peng Fan (OSS)
• [PATCH] dt-bindings: Add resets to the PL011 bindings
  • From: Linus Walleij
• Re: [PATCH v3 2/3] dt-bindings: serial: renesas,sci: Document RZ/G2L SoC
  • From: Rob Herring
• Re: [PATCH v3 1/3] dt-bindings: serial: renesas,scif: Make resets as a required property
  • From: Rob Herring
• Re: [PATCH 02/13] tty: serial: atmel: Check return code of dmaengine_submit()
  • From: Richard Genoud
• Re: [PATCH 03/13] tty: serial: atmel: Call dma_async_issue_pending()
  • From: Richard Genoud
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• Re: [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Michal Simek
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Lukas Wunner
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Lukas Wunner
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Michal Simek
• Re: [PATCH v3 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Andy Shevchenko
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Jan Kiszka
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• Re: [PATCH] Revert "serial: 8250: Don't touch RTS modem control while in rs485 mode"
  • From: Jan Kiszka
• Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Alexander Stein
• Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Jay Dolan
• [PATCH v3 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v3 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v3 0/2] Add UART driver for Suplus SP7021 SoC
  • From: Hammer Hsieh
• RE: [PATCH 11/16] soc: renesas: rcar-rst: Add support for R-Car S4-8
  • From: Yoshihiro Shimoda
• RE: [PATCH 09/16] soc: renesas: Identify R-Car S4-8
  • From: Yoshihiro Shimoda
• RE: [PATCH 09/16] soc: renesas: Identify R-Car S4-8
  • From: Yoshihiro Shimoda
• RE: [PATCH 08/16] dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
  • From: Yoshihiro Shimoda
• RE: [PATCH 07/16] dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
  • From: Yoshihiro Shimoda
• RE: [PATCH 05/16] dt-bindings: power: Add r8a779f0 SYSC power domain definitions
  • From: Yoshihiro Shimoda
• RE: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas Spider boards
  • From: Yoshihiro Shimoda
• Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Rob Herring
• Re: [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
  • From: Rob Herring
• Re: [PATCH v4 02/12] dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching
  • From: Rob Herring
• Re: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
  • From: Rob Herring
• Re: [PATCH V5 8/9] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Rob Herring
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Ruediger Willenberg
• [PATCH v2] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Ruediger Willenberg
• Re: [PATCH] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Ruediger Willenberg
• Re: [PATCH 18/19] mxser: move ids from pci_ids.h here
  • From: Bjorn Helgaas
• Re: [PATCH 13/16] tty: serial: sh-sci: Add support for R-Car Gen4
  • From: Geert Uytterhoeven
• Re: [PATCH 11/16] soc: renesas: rcar-rst: Add support for R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH 09/16] soc: renesas: Identify R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH 09/16] soc: renesas: Identify R-Car S4-8
  • From: Geert Uytterhoeven
• Re: [PATCH 08/16] dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 07/16] dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
  • From: Geert Uytterhoeven
• Re: [PATCH 06/16] dt-bindings: clock: renesas,cpg-mssr: Document r8a779f0
  • From: Geert Uytterhoeven
• Re: [PATCH 05/16] dt-bindings: power: Add r8a779f0 SYSC power domain definitions
  • From: Geert Uytterhoeven
• Re: [PATCH 04/16] dt-bindings: power: renesas,rcar-sysc: Document r8a779f0 SYSC bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 03/16] dt-bindings: reset: renesas,rst: Document r8a779f0 reset module
  • From: Geert Uytterhoeven
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas Spider boards
  • From: Geert Uytterhoeven
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document R-Car S4-8 SoC DT bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v1 1/2] serial: 8250_pci: Split out Pericom driver
  • From: Jay Dolan
• Re: [PATCH v2 0/2] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] serial: 8250_pci: Split out Pericom driver
  • From: Andy Shevchenko
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Michal Simek
• Re: [PATCH] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Michal Simek
• Re: [PATCH 16/16] tty: drop tty_flip_buffer_push
  • From: Johan Hovold
• Re: [PATCH 16/16] tty: drop tty_flip_buffer_push
  • From: Jiri Slaby
• [PATCH 18/19] mxser: move ids from pci_ids.h here
  • From: Jiri Slaby
• [PATCH 19/19] mxser: use PCI_DEVICE_DATA
  • From: Jiri Slaby
• [PATCH 17/19] mxser: add MOXA prefix to some PCI device IDs
  • From: Jiri Slaby
• [PATCH 16/19] mxser: increase buf_overrun if tty_insert_flip_char() fails
  • From: Jiri Slaby
• [PATCH 15/19] mxser: remove tty parameter from mxser_receive_chars_new()
  • From: Jiri Slaby
• [PATCH 14/19] mxser: don't throttle manually
  • From: Jiri Slaby
• [PATCH 13/19] mxser: clean up timeout handling in mxser_wait_until_sent()
  • From: Jiri Slaby
• [PATCH 12/19] mxser: use msleep_interruptible() in mxser_wait_until_sent()
  • From: Jiri Slaby
• [PATCH 11/19] mxser: extract TX empty check from mxser_wait_until_sent()
  • From: Jiri Slaby
• [PATCH 10/19] mxser: use tty_port_close() in mxser_close()
  • From: Jiri Slaby
• [PATCH 08/19] mxser: call stop_rx from mxser_shutdown_port()
  • From: Jiri Slaby
• [PATCH 09/19] mxser: don't flush buffer from mxser_close() directly
  • From: Jiri Slaby
• [PATCH 06/19] mxser: remove pointless xmit_buf checks
  • From: Jiri Slaby
• [PATCH 07/19] mxser: remove tty->driver_data NULL check
  • From: Jiri Slaby
• [PATCH 05/19] mxser: clean up tx handling in mxser_transmit_chars()
  • From: Jiri Slaby
• [PATCH 04/19] mxser: move MSR read to mxser_check_modem_status()
  • From: Jiri Slaby
• [PATCH 03/19] mxser: keep only !tty test in ISR
  • From: Jiri Slaby
• [PATCH 02/19] mxser: rename mxser_close_port() to mxser_stop_rx()
  • From: Jiri Slaby
• [PATCH 01/19] mxser: remove wait for sent from mxser_close_port
  • From: Jiri Slaby
• [PATCH 00/19] mxser: another round of cleanups and fixes
  • From: Jiri Slaby
• [PATCH 2/4] tty: remove tty NULL check from __do_SAK()
  • From: Jiri Slaby
• [PATCH 4/4] tty: serial, join uport checks in uart_port_shutdown()
  • From: Jiri Slaby
• [PATCH 3/4] tty: clean up whitespace in __do_SAK()
  • From: Jiri Slaby
• [PATCH 1/4] tty: remove TTY_SOFT_SAK part from __do_SAK()
  • From: Jiri Slaby
• [PATCH 0/4] tty: small tidying
  • From: Jiri Slaby
• [PATCH] n_gsm: remove unused parameters from gsm_error()
  • From: Jiri Slaby
• Re: [PATCH v2 0/2] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Jay Dolan
• Re: [PATCH v1 1/2] serial: 8250_pci: Split out Pericom driver
  • From: Jay Dolan
• [PATCH] serial: uartlite: Move out-of-range port-numbers into ULITE_NR_UARTS range
  • From: Ruediger Willenberg
• [PATCH v1 2/2] serial: 8250_pericom: Re-enable higher baud rates
  • From: Andy Shevchenko
• [PATCH v1 1/2] serial: 8250_pci: Split out Pericom driver
  • From: Andy Shevchenko
• [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver
  • From: Andy Shevchenko
• [PATCH v2 2/2] serial: 8250_pci: rewrite pericom_do_set_divisor()
  • From: Andy Shevchenko
• [PATCH v2 1/2] serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  • From: Andy Shevchenko
• [PATCH v2 0/2] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Andy Shevchenko
• Re: [PATCH 0/3] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Andy Shevchenko
• Re: [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Ruediger Willenberg
• Re: [PATCH v2 0/3] serial: liteuart: fix driver unbind
  • From: Andy Shevchenko
• [PATCH v2 2/3] serial: liteuart: fix minor-number leak on probe errors
  • From: Johan Hovold
• [PATCH v2 1/3] serial: liteuart: fix use-after-free and memleak on unbind
  • From: Johan Hovold
• [PATCH v2 3/3] serial: liteuart: relax compile-test dependencies
  • From: Johan Hovold
• [PATCH v2 0/3] serial: liteuart: fix driver unbind
  • From: Johan Hovold
• Re: [PATCH 1/3] serial: liteuart: fix compile testing
  • From: Johan Hovold
• [PATCH v2] uartlite: Update the default for the SERIAL_UARTLITE_NR_UARTS
  • From: Shubhrajyoti Datta
• Re: [PATCH 0/3] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Jay Dolan
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Emil Renner Berthing
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Emil Renner Berthing
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Arnd Bergmann
• Re: [PATCH v4 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver
  • From: Andy Shevchenko
• Re: [PATCH v4 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver
  • From: Andy Shevchenko
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Andy Shevchenko
• Re: [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Arnd Bergmann
• Re: [PATCH v4 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver
  • From: Emil Renner Berthing
• Re: [PATCH v4 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver
  • From: Andy Shevchenko
• Re: [PATCH v4 12/16] pinctrl: starfive: Add pinctrl driver for StarFive SoCs
  • From: Andy Shevchenko
• Re: [PATCH 1/3] serial: liteuart: fix compile testing
  • From: Andy Shevchenko
• Re: [PATCH 0/3] serial: 8250_pci patches to address issues with pericom_do_set_divisor()
  • From: Andy Shevchenko
• Re: [PATCH 2/3] serial: 8250_pci: Re-enable higher baud rates on Pericom chips
  • From: Andy Shevchenko
• Re: [PATCH 3/3] serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  • From: Andy Shevchenko
• [PATCH v4 16/16] RISC-V: Add BeagleV Starlight Beta device tree
  • From: Emil Renner Berthing
• [PATCH v4 15/16] RISC-V: Add initial StarFive JH7100 device tree
  • From: Emil Renner Berthing
• [PATCH v4 13/16] dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
  • From: Emil Renner Berthing
• [PATCH v4 14/16] serial: 8250_dw: Add StarFive JH7100 quirk
  • From: Emil Renner Berthing
• [PATCH v4 12/16] pinctrl: starfive: Add pinctrl driver for StarFive SoCs
  • From: Emil Renner Berthing
• [PATCH v4 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver
  • From: Emil Renner Berthing
• [PATCH v4 11/16] dt-bindings: pinctrl: Add StarFive JH7100 bindings
  • From: Emil Renner Berthing
• [PATCH v4 10/16] dt-bindings: pinctrl: Add StarFive pinctrl definitions
  • From: Emil Renner Berthing
• [PATCH v4 07/16] dt-bindings: reset: Add StarFive JH7100 reset definitions
  • From: Emil Renner Berthing
• [PATCH v4 08/16] dt-bindings: reset: Add Starfive JH7100 reset bindings
  • From: Emil Renner Berthing
• [PATCH v4 06/16] clk: starfive: Add JH7100 clock generator driver
  • From: Emil Renner Berthing
• [PATCH v4 04/16] dt-bindings: clock: starfive: Add JH7100 clock definitions
  • From: Emil Renner Berthing
• [PATCH v4 05/16] dt-bindings: clock: starfive: Add JH7100 bindings
  • From: Emil Renner Berthing
• [PATCH v4 03/16] dt-bindings: interrupt-controller: Add StarFive JH7100 plic
  • From: Emil Renner Berthing
• [PATCH v4 01/16] RISC-V: Add StarFive SoC Kconfig option
  • From: Emil Renner Berthing
• [PATCH v4 02/16] dt-bindings: timer: Add StarFive JH7100 clint
  • From: Emil Renner Berthing
• [PATCH v4 00/16] Basic StarFive JH7100 RISC-V SoC support
  • From: Emil Renner Berthing
• Re: Extending serial port linux driver to toggle RS485 direction pin (GPIO)
  • From: Greg KH
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas Spider boards
  • From: Rob Herring
• Re: Extending serial port linux driver to toggle RS485 direction pin (GPIO)
  • From: Jochen Mades
• Re: [PATCH] tty: serial: atmel: Check return code of dmaengine_submit()
  • From: Tudor.Ambarus
• [PATCH 11/13] dmaengine: at_xdmac: Fix lld view setting
  • From: Tudor Ambarus
• [PATCH 13/13] dmaengine: at_xdmac: Fix race over irq_status
  • From: Tudor Ambarus
• [PATCH 09/13] dmaengine: at_xdmac: Fix concurrency over xfers_list
  • From: Tudor Ambarus
• [PATCH 12/13] dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
  • From: Tudor Ambarus
• [PATCH 10/13] dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
  • From: Tudor Ambarus
• [PATCH 08/13] dmaengine: at_xdmac: Move the free desc to the tail of the desc list
  • From: Tudor Ambarus
• [PATCH 07/13] dmaengine: at_xdmac: Fix race for the tx desc callback
  • From: Tudor Ambarus
• [PATCH 06/13] dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
  • From: Tudor Ambarus
• [PATCH 05/13] dmaengine: at_xdmac: Print debug message after realeasing the lock
  • From: Tudor Ambarus
• [PATCH 04/13] dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
  • From: Tudor Ambarus