platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- drivers/tty/serial/altera_jtaguart.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 23c4e0e79694..37bffe406b18 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -418,8 +418,9 @@ static int altera_jtaguart_probe(struct platform_device *pdev) struct altera_jtaguart_platform_uart *platp = dev_get_platdata(&pdev->dev); struct uart_port *port; - struct resource *res_irq, *res_mem; + struct resource *res_mem; int i = pdev->id; + int irq; /* -1 emphasizes that the platform must have one port, no .N suffix */ if (i == -1) @@ -438,9 +439,11 @@ static int altera_jtaguart_probe(struct platform_device *pdev) else return -ENODEV; - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res_irq) - port->irq = res_irq->start; + irq = platform_get_irq_optional(pdev, 0); + if (irq < 0 && irq != -ENXIO) + return irq; + if (irq > 0) + port->irq = irq; else if (platp) port->irq = platp->irq; else -- 2.17.1
