Linux SCSI

• Thread Index

• Re: [PATCH 11/19] ata: libata-core: Detach a port devices on shutdown
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 10/19] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 09/19] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 06/19] ata: libata-core: Do not register PM operations for SAS ports
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH 01/19] ata: libata-core: Fix ata_port_request_pm() locking
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Minor cleanups
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v3 3/3] scsi: libsas: Declare sas_discover_end_dev() static
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v3 2/3] scsi: libsas: Declare sas_set_phy_speed() static
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v3 1/3] scsi: libsas: Move local functions declarations to sas_internal.h
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v3 0/3] Minor cleanups
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Minor cleanups
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 8/8] scsi: qla2xxx: Use FIELD_GET() to extract Link Width
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 7/8] scsi: esas2r: Use FIELD_GET() to extract Link Width
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 3/3] scsi: libsas: Declare sas_discover_end_dev() static
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 2/3] scsi: libsas: Declare sas_set_phy_speed() static
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 1/3] scsi: libsas: Move local functions declarations to sas_internal.h
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 0/3] Minor cleanups
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 1/3] scsi: libsas: Move local functions declarations to sas_internal.h
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 1/3] scsi: libsas: Move local functions declarations to sas_internal.h
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 2/3] scsi: libsas: Declare sas_set_phy_speed() static
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• blktests failures with v6.6-rc1
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH 3/3] scsi: libsas: Declare sas_discover_end_dev() static
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v2 18/21] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 3/3] scsi: libsas: Declare sas_discover_end_dev() static
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 2/3] scsi: libsas: Declare sas_set_phy_speed() static
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 1/3] scsi: libsas: Move local functions declarations to sas_internal.h
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 0/3] Minor cleanups
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2 18/21] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v3 5/6] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 09/21] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 08/21] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 16/21] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 10/10] scsi: pm8001: Remove PM8001_READ_VPD
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 06/10] scsi: pm8001: Simplify pm8001_chip_interrupt_enable/disable()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 17/21] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 10/21] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 13/21] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 00/21] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 18/21] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 05/10] scsi: pm8001: Introduce pm8001_handle_irq()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 04/10] scsi: pm8001: Introduce pm8001_kill_tasklet()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 07/10] scsi: pm8001: Remove pm80xx_chip_intx_interrupt_enable/disable()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 00/10] scsi: pm8001: Bug fix and cleanup
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 09/10] scsi: pm8001: Remove PM8001_USE_TASKLET
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 08/10] scsi: pm8001: Remove PM8001_USE_MSIX
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 02/10] scsi: pm8001: Introduce pm8001_free_irq()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 03/10] scsi: pm8001: Introduce pm8001_init_tasklet()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 01/10] scsi: pm8001: Setup IRQs on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 21/21] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 09/21] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 07/21] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 12/21] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 05/21] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 11/21] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 08/21] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 01/21] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 19/21] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 02/21] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 14/21] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 06/21] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 04/21] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 20/21] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2 15/21] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v3 1/6] alpha: Streamline convoluted PCI error handling
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/10] scsi: pm8001: Remove PM8001_READ_VPD
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 8/8] scsi: qla2xxx: Use FIELD_GET() to extract Link Width
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [PATCH 6.1 431/600] scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6.4 524/737] scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6.4 526/737] scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• RE: [PATCH] scsi: fnic: Replace sgreset tag with max_tag_id
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• [PATCH 6.1 430/600] scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/6] PCI: Do error check on own line to split long if conditions
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH 6.1 432/600] scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] pm80xx: Use phy specific sas address when sending PHY_START command
  • From: Michal Grzedzicki <mge@xxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 1/1] lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
  • From: Ewan Milne <emilne@xxxxxxxxxx>
• [PATCH 6.4 525/737] scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v3 5/6] PCI: xgene: Do PCI error check on own line & keep return value
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH 6.5 497/739] scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/6] scsi: ipr: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH v3 0/6] PCI/treewide: Cleanup/streamline PCI error code handling
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH 2/2] pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
  • From: Michal Grzedzicki <mge@xxxxxxxx>
• [PATCH 6.5 496/739] scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/6] sh: pci: Do PCI error check on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/10] scsi: pm8001: Bug fix and cleanup
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• [PATCH v3 3/6] atm: iphase: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v3 5/6] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 7/8] scsi: esas2r: Use FIELD_GET() to extract Link Width
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH 6.5 495/739] scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] scsi: ufs: core: Add ufshcd_wb_buf_resize function to enable WB buffer resize
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [Bug 215943] UBSAN: array-index-out-of-bounds in drivers/scsi/megaraid/megaraid_sas_fp.c:103:32
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 02/10] scsi: pm8001: Introduce pm8001_free_irq()
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• Re: [PATCH 01/10] scsi: pm8001: Setup IRQs on resume
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• [Bug 215943] UBSAN: array-index-out-of-bounds in drivers/scsi/megaraid/megaraid_sas_fp.c:103:32
  • From: bugzilla-daemon@xxxxxxxxxx
• RE: [PATCH v4] ufs: poll pmc until another pa request is completed
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• RE: [PATCH v4] ufs: poll pmc until another pa request is completed
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• RE: [RESEND PATCH v3 0/2] change UIC command handling
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 0/2] change UIC command handling
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 19/19] ata: libata: Cleanup inline DMA helper functions
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 16/19] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 15/19] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 14/19] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 13/19] ata: libata-core: Remove ata_port_resume_async()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 12/19] ata: libata-core: Remove ata_port_suspend_async()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 11/19] ata: libata-core: Detach a port devices on shutdown
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 10/19] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 09/19] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 06/19] ata: libata-core: Do not register PM operations for SAS ports
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH V8 0/5] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 01/19] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Hannes Reinecke <hare@xxxxxxx>
• RE: [RESEND PATCH v3 0/2] change UIC command handling
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v3 3/3] scsi: ufs: core: Add sysfs attributes to get the hint information and status of WB buffer resize
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH 5/6] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 1/6] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 6/6] scsi: ufs: ufs-sysfs: Introduce UFS power info sysfs nodes
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 3/6] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 0/6] Enable HS-G5 support on SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v3 2/3] scsi: ufs: core: Add sysfs attribute to control WB buffer resize function
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH v3 1/3] scsi: ufs: core: add wb buffer resize related attr_idn
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH v3 0/3] scsi: ufs: core: support WB buffer resize function
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• Re: [PATCH 2/2] scsi: ufs: ufs-qcom: Rename "hs_gear" to "phy_gear"
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 0/2] change UIC command handling
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 19/19] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 16/19] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 15/19] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 14/19] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 13/19] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 12/19] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 11/19] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 10/19] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 09/19] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 06/19] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 01/19] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 00/19] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 10/10] scsi: pm8001: Remove PM8001_READ_VPD
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 09/10] scsi: pm8001: Remove PM8001_USE_TASKLET
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 08/10] scsi: pm8001: Remove PM8001_USE_MSIX
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 07/10] scsi: pm8001: Remove pm80xx_chip_intx_interrupt_enable/disable()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 06/10] scsi: pm8001: Simplify pm8001_chip_interrupt_enable/disable()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 05/10] scsi: pm8001: Introduce pm8001_handle_irq()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 03/10] scsi: pm8001: Introduce pm8001_init_tasklet()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 04/10] scsi: pm8001: Introduce pm8001_kill_tasklet()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 02/10] scsi: pm8001: Introduce pm8001_free_irq()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 01/10] scsi: pm8001: Setup IRQs on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH 00/10] scsi: pm8001: Bug fix and cleanup
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• RE: [RESEND PATCH v3 0/2] change UIC command handling
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] scsi: ufs: core: support WB buffer resize function
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [GIT PULL] final round of SCSI updates for the 6.5+ merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] final round of SCSI updates for the 6.5+ merge window
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] final round of SCSI updates for the 6.5+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/14] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 09/24] scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is detected
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/12] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 11/16] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 10/14] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 13/19] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 15/24] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 15/25] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 09/25] scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is detected
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 16/28] scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 09/28] scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is detected
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 1/1] lpfc: Prevent use-after-free during rmmod with mapped NVME rports
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 1/1] lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• scsi: hosts: check result of scsi_host_set_state() in scsi_add_host_with_dma()
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH v2 3/3] scsi: ufs: core: Add sysfs attributes to control WB buffer resize function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 2/3] scsi: ufs: core: Add ufshcd_wb_buf_resize function to enable WB buffer resize
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/3] scsi: ufs: core: add wb buffer resize related attr_idn
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 2/2] scsi: ufs: ufs-qcom: Rename "hs_gear" to "phy_gear"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/3] scsi: ufs: core: Add ufshcd_wb_buf_resize function to enable WB buffer resize
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/3] scsi: ufs: core: Add ufshcd_wb_buf_resize function to enable WB buffer resize
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH v2 3/3] scsi: ufs: core: Add sysfs attributes to control WB buffer resize function
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH v2 1/3] scsi: ufs: core: add wb buffer resize related attr_idn
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH v2 0/3] scsi: ufs: core: support WB buffer resize function
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• Re: [PATCH] scsi: scsi_dh_rdac: Avoid crash when a disk attach failed
  • From: Ding Hui <dinghui@xxxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: Include the SCSI ID in UFS command tracing output
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 3/3] scsi: ufs: core: Add exception event handler to implicitly handle WB buffer resize event
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] scsi: ufs: core: Add exception event handler to implicitly handle WB buffer resize event
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH -next] scsi: ufs: core: Simplify bool conversion
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• RE: [PATCH] scsi: fnic: Replace sgreset tag with max_tag_id
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• [PATCH v2] scsi: ufs: Include the SCSI ID in UFS command tracing output
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [RFC PATCH v2 00/18] scsi: scsi_error: Introduce new error handle mechanism
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: do not look for unsupported vdd-hba-max-microamp
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH 3/3] scsi: ufs: core: Add exception event handler to implicitly handle WB buffer resize event
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH 3/3] scsi: ufs: core: Add exception event handler to implicitly handle WB buffer resize event
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• [PATCH v4] ufs: poll pmc until another pa request is completed
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• Re: [PATCH] scsi: scsi_dh_rdac: Avoid crash when a disk attach failed
  • From: Ding Hui <dinghui@xxxxxxxxxxxxxx>
• [PATCH -next] scsi: ufs: core: Simplify bool conversion
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Fix Fix the NULL vs IS_ERR() bug for debugfs_create_file()
  • From: Justin Tee <justin.tee@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 00/18] scsi: scsi_error: Introduce new error handle mechanism
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH] scsi: scsi_dh_rdac: Avoid crash when a disk attach failed
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [RFC PATCH v2 09/19] scsi: core: increase/decrease target_busy without check can_queue
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [PATCH] scsi: ufs: do not look for unsupported vdd-hba-max-microamp
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v2 00/18] scsi: scsi_error: Introduce new error handle mechanism
  • From: "haowenchao (C)" <haowenchao2@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.1 10/15] scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: scsi_dh_rdac: Avoid crash when a disk attach failed
  • From: Ding Hui <dinghui@xxxxxxxxxxxxxx>
• [PATCH] scsi: lpfc: Fix Fix the NULL vs IS_ERR() bug for debugfs_create_file()
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• [bvanassche:block-for-next] [scsi] 6d1716982b: BUG:kernel_NULL_pointer_dereference,address
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [RFC PATCH v2 00/18] scsi: scsi_error: Introduce new error handle mechanism
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [RFC PATCH v2 09/19] scsi: core: increase/decrease target_busy without check can_queue
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 21/34] scsi: ch: Have scsi-ml retry ch_do_scsi errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 04/34] scsi: Have scsi-ml retry scsi_probe_lun errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 01/34] scsi: Add helper to prep sense during error handling
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 15/34] scsi: rdac: Have scsi-ml retry send_mode_select errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 11/34] scsi: hp_sw: Only access sshdr if res > 0
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• scsi: Allow scsi_execute users to control retries
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 09/34] scsi: sd: Fix sshdr use in sd_spinup_disk
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 18/34] scsi: sd: Fix sshdr use in sd_suspend_common
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 05/34] scsi: retry INQUIRY after timeout
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 02/34] scsi: Allow passthrough to override what errors to retry
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 20/34] scsi: ch: Remove unit_attention
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 03/34] scsi: Add scsi_failure field to scsi_exec_args
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 19/34] scsi: sd: Have scsi-ml retry sd_sync_cache errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 23/34] scsi: sd: Fix scsi_mode_sense caller's sshdr use
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 24/34] scsi: Have scsi-ml retry scsi_report_lun_scan errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 32/34] scsi: sd: Fix sshdr use in cache_type_store
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 33/34] scsi: sr: Fix sshdr use in sr_get_events
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 28/34] scsi: sr: Have scsi-ml retry get_sectorsize errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 29/34] scsi: ufs: Have scsi-ml retry start stop errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 26/34] scsi: sd: Have scsi-ml retry read_capacity_10 errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 12/34] scsi: hp_sw: Have scsi-ml retry scsi_exec_req errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 25/34] scsi: sd: Have pr commands retry UAs
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 27/34] scsi: ses: Have scsi-ml retry scsi_exec_req errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 17/34] scsi: spi: Have scsi-ml retry spi_execute errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 31/34] scsi: Fix sshdr use in scsi_cdl_enable
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 34/34] scsi: Add kunit tests for scsi_check_passthrough
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 30/34] scsi: Fix sshdr use in scsi_test_unit_ready
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 10/34] scsi: Have scsi-ml retry sd_spinup_disk errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 14/34] scsi: rdac: Fix sshdr use
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 22/34] scsi: Have scsi-ml retry scsi_mode_sense UAs
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 16/34] scsi: spi: Fix sshdr use
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 13/34] scsi: rdac: Fix send_mode_select retry handling
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 06/34] scsi: sd: Fix sshdr use in read_capacity_16
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 08/34] scsi: Use separate buf for START_STOP in sd_spinup_disk
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH v11 07/34] scsi: sd: Have scsi-ml retry read_capacity_16 errors
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [RESEND PATCH v3 0/2] change UIC command handling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] scsi: target: Replace strlcpy with strscpy
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• blktests failures with v6.5
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH V8 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH V8 1/5] scsi: ufs: qcom: Update MAX_CORE_CLK_1US_CYCLES for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] scsi:libsas: Simplify sas_queue_reset and remove unused code
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH V8 4/5] scsi: ufs: qcom: Align programing of unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH v6 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• [PATCH v6 0/3] Add helper macro DEFINE_SHOW_STORE_ATTRIBUTE() at seq_file.c
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• Re: [PATCH v1 0/2] Changes for UFS advanced RPMB
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: megaraid_sas: fix deadlock on firmware crashdump
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: use raw_smp_processor_id instead of smp_processor_id
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 0/2] mpt3sas: Additional retries when reading specific registers
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qedf: Added the synchronization between IO completions and abort.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH V8 3/5] scsi: ufs: qcom: Add support to Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V8 0/5] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH v6 1/3] seq_file: Add helper macro to define attribute for rw file
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix the build for the old ARM OABI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [RFC PATCH v2 00/18] scsi: scsi_error: Introduce new error handle mechanism
  • From: "haowenchao (C)" <haowenchao2@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V3 01/14] blk-mq: add blk_mq_max_nr_hw_queues()
  • From: Baoquan He <bhe@xxxxxxxxxx>
• [PATCH v6 2/3] scsi: hisi_sas: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• [PATCH V8 5/5] scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH] scsi: megaraid_sas: fix deadlock on firmware crashdump
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH V7 5/5] scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and above
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH V7 3/5] scsi: ufs: qcom: Add support to Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 5/5] scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 4/5] scsi: ufs: qcom: Align programing of unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 1/5] scsi: ufs: qcom: Update MAX_CORE_CLK_1US_CYCLES for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 0/5] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V6 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V6 4/6] scsi: ufs: qcom: Align unipro clk attributes configuration as per HPG
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V6 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V6 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V6 1/6] scsi: ufs: qcom: Align mask for core_clk_1us_cycles
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
  • From: yangxingui <yangxingui@xxxxxxxxxx>
• Re: [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] scsi: hisi_sas: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] seq_file: Add helper macro to define attribute for rw file
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 1/3] seq_file: Add helper macro to define attribute for rw file
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• [PATCH v5 2/3] scsi: hisi_sas: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• [PATCH v5 0/3] Add helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• Re: [RESEND,v3,2/2] ufs: poll HCS.UCRDY before issuing a UIC command
  • From: Chanwoo Lee <cw9316.lee@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 1/2] ufs: make __ufshcd_send_uic_cmd not wrapped by host_lock
  • From: Chanwoo Lee <cw9316.lee@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
  • From: yangxingui <yangxingui@xxxxxxxxxx>
• [RESEND PATCH v3 2/2] ufs: poll HCS.UCRDY before issuing a UIC command
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• [RESEND PATCH v3 1/2] ufs: make __ufshcd_send_uic_cmd not wrapped by host_lock
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• [RESEND PATCH v3 0/2] change UIC command handling
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 6.4+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 6.4+ merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] first round of SCSI updates for the 6.4+ merge window
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] first round of SCSI updates for the 6.4+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V6 6/6] scsi: ufs: qcom: Configure clk HW division based on scaling conditions.
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 4/6] scsi: ufs: qcom: Align unipro clk attributes configuration as per HPG
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 1/6] scsi: ufs: qcom: Align mask for core_clk_1us_cycles
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V6 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH V6 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH V6 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 4/6] scsi: ufs: qcom: Align unipro clk attributes configuration as per HPG
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 6/6] scsi: ufs: qcom: Configure clk HW division based on scaling conditions.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 1/6] scsi: ufs: qcom: Align mask for core_clk_1us_cycles
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 6/6] scsi: ufs: qcom: Configure clk HW division based on scaling conditions.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 1/6] scsi: ufs: qcom: Align mask for core_clk_1us_cycles
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 4/6] scsi: ufs: qcom: Align unipro clk attributes configuration as per HPG
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V6 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [RFC PATCH v2 19/19] scsi: iscsi_tcp: Add param to control LUN based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 17/19] scsi: megaraid_sas: Add param to control target based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 16/19] scsi: smartpqi: Add param to control LUN based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 18/19] scsi: virtio_scsi: Add param to control LUN based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 14/19] scsi: mpt3sas: Add param to control LUN based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 15/19] scsi: mpt3sas: Add param to control target based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 11/19] scsi: scsi_error: Add a general target based error handler
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 12/19] scsi: scsi_debug: Add param to control LUN bassed error handler
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 13/19] scsi: scsi_debug: Add param to control target based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 04/19] scsi: scsi_error: Add helper scsi_eh_sdev_stu to do START_UNIT
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 05/19] scsi: scsi_error: Add helper scsi_eh_sdev_reset to do lun reset
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 08/19] scsi: scsi_error: Add a general LUN based error handler
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 09/19] scsi: core: increase/decrease target_busy without check can_queue
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 03/19] scsi: scsi_error: Check if to do reset in scsi_try_xxx_reset
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 10/19] scsi: scsi_error: Add helper to handle scsi target's error command list
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 06/19] scsi: scsi_error: Add flags to mark error handle steps has done
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 07/19] scsi: scsi_error: Add helper to handle scsi device's error command list
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 02/19] scsi: scsi_error: Move complete variable eh_action from shost to sdevice
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 00/18] scsi: scsi_error: Introduce new error handle mechanism
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [RFC PATCH v2 01/19] scsi: scsi_error: Define framework for LUN/target based error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
  • From: yangxingui <yangxingui@xxxxxxxxxx>
• [PATCH] qedf: Added the synchronization between IO completions and abort.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH v3] scsi: target: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v3] scsi: target: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• Re: [PATCH v3] scsi: target: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3] scsi: target: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH] scsi: qla2xxx: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• [PATCH v2 2/3] ufs: core: fix abnormal scale up after last cmd finish
  • From: <peter.wang@xxxxxxxxxxxx>
• [PATCH v2 3/3] ufs: core: fix abnormal scale up after scale down
  • From: <peter.wang@xxxxxxxxxxxx>
• [PATCH v2 1/3] ufs: core: only suspend clock scaling if scale down
  • From: <peter.wang@xxxxxxxxxxxx>
• [PATCH v2 0/3] Fix abnormal clock scaling behaviors
  • From: <peter.wang@xxxxxxxxxxxx>
• [PATCH] qla2xxx: use raw_smp_processor_id instead of smp_processor_id
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH] qla2xxx: correct endianness for rqstlen and rsplen
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v2 04/10] soc: qcom: ice: support for hardware wrapped keys
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 03/10] soc: qcom: ice: add hwkm support in ice
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 1/9] qla2xxx: Add Unsolicited LS Request and Response Support for NVMe
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH] scsi: imm: Add a module parameter for the transfer mode
  • From: Alex Henrie <alexhenrie24@xxxxxxxxx>
• Re: [PATCH 2/2] scsi: ppa: Add a module parameter for the transfer mode
  • From: Alex Henrie <alexhenrie24@xxxxxxxxx>
• [PATCH] scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
  • From: Alex Henrie <alexhenrie24@xxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v4 0/9] scsi:scsi_debug: Add error injection for single device
  • From: "haowenchao (C)" <haowenchao2@xxxxxxxxxx>
• Re: [PATCH] xen/scsifront: shost_priv() can never return NULL
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: qed: Remove unused declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] scsi: tape: add third party poweron reset handling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/8] smartpqi updates
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 00/10] libsas: Some tidy-up
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: fix sparse warning in func qla24xx_build_scsi_type_6_iocbs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: core: Improve type safety of scsi_rescan_device()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/2] qla2xxx: allow 32 bytes CDB
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/9] qla2xxx driver misc features
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: fix nvme_fc_rcv_ls_req undefined error
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: core: Report error list information in debugfs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: Remove the number of forward declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: "Vivi, Rodrigo" <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v1 0/2] Changes for UFS advanced RPMB
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 0/2] mpt3sas: Additional retries when reading specific registers
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi:libsas: Simplify sas_queue_reset and remove unused code
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix the build for the old ARM OABI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: fnic: Replace sgreset tag with max_tag_id
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: fnic: Remove unused function fnic_scsi_host_start/end_tag()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] scsi: target: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2] scsi: target: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v2] scsi: target: Replace strlcpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH v2] scsi: target: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH v2] scsi: target: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• Re: [PATCH] scsi: target: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• pm80xx: Issues with SATA drives behind expander
  • From: Michal Grzedzicki <mge@xxxxxxxx>
• Re: [PATCH v1 3/3] ufs: core: fix abnormal scale up after scale down
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: target: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• Re: [PATCH v1 1/3] ufs: core: only suspend clock scaling if scale down
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 2/3] ufs: core: fix abnormal scale up after last cmd finish
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH -next] scsi: fnic: Remove unused function fnic_scsi_host_start/end_tag()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v1] ufs: core: fix runtime pm with uic error(NON_FATAL) hang
  • From: <peter.wang@xxxxxxxxxxxx>
• Re: [PATCH] scsi:libsas: Simplify sas_queue_reset and remove unused code
  • From: "haowenchao (C)" <haowenchao2@xxxxxxxxxx>
• Re: [PATCH] scsi: core: Remove ACTION_RETRY since it is redundant
  • From: Martin Wilck <mwilck@xxxxxxxx>
• Re: [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 00/13] scsi: Support LUN/target based error handle
  • From: "haowenchao (C)" <haowenchao2@xxxxxxxxxx>
• Re: [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• RE: [PATCH] scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• RE: [EXT] [PATCH][next] scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH 2/2] scsi: tape: add unexpected rewind handling
  • From: John Meneghini <jmeneghi@xxxxxxxxxx>
• Re: [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH] scsi: gvp11: add module parameter for DMA transfer bit mask
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix the build for the old ARM OABI
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 0/2] scsi: fix 2 cases of -Wfortify-source
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix the build for the old ARM OABI
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v1 1/3] ufs: core: only suspend clock scaling if scale down
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 0/3] Fix abnormal clock scaling behaviors
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 3/3] ufs: core: fix abnormal scale up after scale down
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 2/3] ufs: core: fix abnormal scale up after last cmd finish
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: ufs: Fix the build for the old ARM OABI
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 0/2] scsi: fix 2 cases of -Wfortify-source
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix the build for big endian 32-bit ARM systems
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 5/6] scsi: storvsc: Always set no_report_opcodes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 11/15] scsi: storvsc: Always set no_report_opcodes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 10/15] scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 8/9] scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 12/15] scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 6/7] scsi: storvsc: Always set no_report_opcodes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 7/9] scsi: storvsc: Always set no_report_opcodes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 6/9] scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 0/29] block: Make blkdev_get_by_*() return handle
  • From: Christian Brauner <brauner@xxxxxxxxxx>
• [PATCH v4 1/2] mpt3sas: Perform additional retries if Doorbell read returns 0
  • From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
• [PATCH v4 2/2] mpt3sas: Removing volatile qualifier
  • From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
• [PATCH v4 0/2] mpt3sas: Additional retries when reading specific registers
  • From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
• [bvanassche:block-for-next] [scsi] b4cd894093: BUG:kernel_NULL_pointer_dereference,address
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• RE: [PATCH] scsi: fnic: Replace sgreset tag with max_tag_id
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH -next] scsi: fnic: Remove unused function fnic_scsi_host_start/end_tag()
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• [PATCH -next] scsi: fnic: Remove unused function fnic_scsi_host_start/end_tag()
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] scsi: fix 2 cases of -Wfortify-source
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH 2/2] scsi: myrs: fix -Wfortify-source
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH 1/2] scsi: myrb: fix -Wfortify-source
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH 0/2] scsi: fix 2 cases of -Wfortify-source
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] scsi: megaraid_sas: fix deadlock on firmware crashdump
  • From: Junxiao Bi <junxiao.bi@xxxxxxxxxx>
• [PATCH][next] scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH v1 0/2] Changes for UFS advanced RPMB
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 0/29] block: Make blkdev_get_by_*() return handle
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH v2 0/29] block: Make blkdev_get_by_*() return handle
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/29] block: Make blkdev_get_by_*() return handle
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/29] block: Make blkdev_get_by_*() return handle
  • From: Christian Brauner <brauner@xxxxxxxxxx>
• Re: [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH -next] [SCSI] esas2r: Use list_for_each_entry() helper
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH 01/30] block: also call ->open for incremental partition opens
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [czhong@xxxxxxxxxx: [bug report] WARNING: CPU: 121 PID: 93233 at fs/dcache.c:365 __dentry_kill+0x214/0x278]
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions.
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: (subset) [PATCH 00/17] -Wmissing-prototype warning fixes
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: (subset) [PATCH 00/17] -Wmissing-prototype warning fixes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix the build for big endian 32-bit ARM systems
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH] scsi: ufs: Fix the build for big endian 32-bit ARM systems
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 0/2] Changes for UFS advanced RPMB
  • From: Bean Huo <beanhuo@xxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 6.5-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] SCSI fixes for 6.5-rc7
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 8/8] scsi: ipr: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_RAID_VOL_0::PhysDisk[] a flexible array
  • From: James Seo <james@xxxxxxxxxx>
• Re: [PATCH v2 02/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_IO_UNIT_8::Sensor[] a flexible array
  • From: James Seo <james@xxxxxxxxxx>
• [GIT PULL] SCSI fixes for 6.5-rc7
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] docs: move powerpc under arch
  • From: Costa Shulyupin <costa.shul@xxxxxxxxxx>
• Re: [PATCH v2 0/29] block: Make blkdev_get_by_*() return handle
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: Optimal I/O size of 33553920 bytes should not appear.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: (subset) [PATCH 00/17] -Wmissing-prototype warning fixes
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: storvsc: Handle additional SRB status values
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: snic: fix double free in snic_tgt_create()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next v2] scsi: Remove raid_component_add()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: fnic: Replace sgreset tag with max_tag_id
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] qla2xxx: remove unused variables in func qla24xx_build_scsi_type_6_iocbs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v2 03/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_RAID_VOL_0::PhysDisk[] a flexible array
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 02/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_IO_UNIT_8::Sensor[] a flexible array
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 1/1] scsi: storvsc: Handle additional SRB status values
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 0/29] block: Make blkdev_get_by_*() return handle
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH v3 0/29] block: Make blkdev_get_by_*() return handle
  • From: Christian Brauner <brauner@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 15/29] scsi: target: Convert to bdev_open_by_path()
  • From: Christian Brauner <brauner@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: (subset) [PATCH 00/17] -Wmissing-prototype warning fixes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] qla2xxx: remove unused variables in func qla24xx_build_scsi_type_6_iocbs
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• RE: [EXT] Re: [PATCH] qla2xxx: fix sparse warning in func qla24xx_build_scsi_type_6_iocbs
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH v6 0/4] Fix some issues in QCOM UFS bindings
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: tape: add third party poweron reset handling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/8] smartpqi updates
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 01/30] block: also call ->open for incremental partition opens
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: core: Improve type safety of scsi_rescan_device()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: Remove the number of forward declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: snic: fix double free in snic_tgt_create()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] xen/scsifront: shost_priv() can never return NULL
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: snic: fix double free in snic_tgt_create()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/29] block: Make blkdev_get_by_*() return handle
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: (subset) [PATCH 00/17] -Wmissing-prototype warning fixes
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH] qla2xxx: fix sparse warning in func qla24xx_build_scsi_type_6_iocbs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: fix nvme_fc_rcv_ls_req undefined error
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 00/10] libsas: Some tidy-up
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: pmcraid: Use pci_dev_id() to simplify the code
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/3] scsi: Use pci_dev_id() to simplify the code
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: Remove unused extern declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Returning FIS on success for CDL
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: libsas: Remove unused declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: qla2xxx: Remove unused declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] scsi: sli4: Remove code duplication
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: core: Use 32-bit hostnum in scsi_host_lookup()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: pm8001: Remove unused declarations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/2] scsi: ufs: convert probe to use dev_err_probe()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: isci: init Return result of sas_register_ha()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: bfa: Replace one-element array with flexible-array member in struct fc_rscn_pl_s
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: arcmsr: Add __init and __exit for arcmsr_module_{init,exit}
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: (subset) [PATCH 00/17] -Wmissing-prototype warning fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ppa: Fix compilation with PPA_DEBUG=1
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: target: Fix write perf due to unneeded throttling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 1/1] scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxxx>
• Re: [PATCH v6 0/4] Fix some issues in QCOM UFS bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 0/8] smartpqi updates
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 5/8] smartpqi: enhance shutdown notification
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 4/8] smartpqi: simplify lun_number assignment
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 1/8] smartpqi: add abort handler
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 7/8] smartpqi: enhance error messages
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 8/8] smartpqi: change driver version to 2.1.24-046
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 3/8] smartpqi: refactor rename pciinfo to pci_info
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 2/8] smartpqi: refactor rename MACRO to clarify purpose
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v2 6/8] smartpqi: enhance controller offline notification
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• RE: Re: [bug report] blktests srp/002 hang
  • From: Bernard Metzler <BMT@xxxxxxxxxxxxxx>
• [PATCH] qla2xxx: fix sparse warning in func qla24xx_build_scsi_type_6_iocbs
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH] qla2xxx: fix nvme_fc_rcv_ls_req undefined error
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC, PATCH 1/1] rpmb: add Replay Protected Memory Block (RPMB) driver
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• Re: [RFC, PATCH 1/1] rpmb: add Replay Protected Memory Block (RPMB) driver
  • From: Sumit Garg <sumit.garg@xxxxxxxxxx>
• [PATCH 12/14] scsi: ipr: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 2/2] scsi: tape: add unexpected rewind handling
  • From: "Kai Mäkisara (Kolumbus)" <kai.makisara@xxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: tape: add third party poweron reset handling
  • From: "Kai Mäkisara (Kolumbus)" <kai.makisara@xxxxxxxxxxx>
• RE: Re: [bug report] blktests srp/002 hang
  • From: Bernard Metzler <BMT@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] bnx2fc: Remove dma_alloc_coherent to suppress the BUG_ON.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] scsi: sd: Remove the number of forward declarations
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1] ufs: core: only suspend clock scaling if scale down
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v11 04/16] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 15/29] scsi: target: Convert to bdev_open_by_path()
  • From: Jan Kara <jack@xxxxxxx>
• [PATCH v3 0/29] block: Make blkdev_get_by_*() return handle
  • From: Jan Kara <jack@xxxxxxx>