From: Charl Liu <liuchang_125125@xxxxxxx> 1.Add Bayhub module's config "SCSI_BHT" 2.Add Bayhub module's Makefile Signed-off-by: Charl Liu <liuchang_125125@xxxxxxx> --- Change in V1: Add Bayhub module's Kconfig and Makefile for compiling Bayhub's SD/MMC Card interface driver. --- drivers/scsi/bht/Kconfig | 10 ++++++++++ drivers/scsi/bht/Makefile | 18 ++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 drivers/scsi/bht/Kconfig create mode 100644 drivers/scsi/bht/Makefile diff --git a/drivers/scsi/bht/Kconfig b/drivers/scsi/bht/Kconfig new file mode 100644 index 000000000000..f6d224799885 --- /dev/null +++ b/drivers/scsi/bht/Kconfig @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-only +config SCSI_BHT + tristate "Bayhub's SD/MMC Card Interface Driver" + depends on PCI && SCSI + help + This driver supports the Bayhub's SD/MMC host controllers. + + If you have the Bayhub's SD/MMC host controllers, say Y or M here. + + If unsure, say N. diff --git a/drivers/scsi/bht/Makefile b/drivers/scsi/bht/Makefile new file mode 100644 index 000000000000..65fa352c51b2 --- /dev/null +++ b/drivers/scsi/bht/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0-only +INCLUDE = -I$(KERNEL_SOURCE)/include \ + -I$(KERNEL_SOURCE)/drivers/scsi \ + -I$(PWD) + +ccflags-y += -g $(INCLUDE) + +OBJ = linux_os/linux_base.o linux_os/linux_api.o linux_os/linux_scsi.o +CARD_OBJ = card/cardcommon.o card/cardinterface.o card/mmc.o card/sd.o card/thermal.o card/uhs2.o card/card_ddr200_support.o card/output_tuning.o +HOST_OBJ = host/host.o host/hostven.o host/cmdhandler.o host/irqhandler.o host/transhandler.o +MAIN_OBJ = main/cfgmng.o main/thread.o main/autotimerfunc.o main/geniofunc.o main/pmfunc.o main/reqmng.o main/testcase.o +TQ_OBJ = tagqueue/tagqueue.o tagqueue/tqadma2.o tagqueue/tqadma3.o tagqueue/tqadma_sdma_like.o tagqueue/tqpolicy.o tagqueue/tqsdma.o tagqueue/tq_merge.o +UTIL_OBJ = util/util.o util/debug.o + +obj-$(CONFIG_SCSI_BHT) := bht-sd.o +bht-sd-objs := $(OBJ) $(CARD_OBJ) $(HOST_OBJ) $(MAIN_OBJ) $(TQ_OBJ) $(UTIL_OBJ) + + -- 2.34.1
