[Bug 76681] Adaptec 7805H SAS HBA (pm80xx) cannot survive ACPI S3 or ACPI S4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=76681

DE (risc4all@xxxxxxxxx) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |CODE_FIX

--- Comment #4 from DE (risc4all@xxxxxxxxx) ---
Apparently the issue has just been resolved as my bro having this stupid
controller verified today. This needed kernel 6.1.57 to avoid a warning after
resume. We want to thank everyone for all the patches that have been sent
throughout many years for this broken driver.

Till today this product was not usable and that was tragic so
LSI/Broadcom/Avago SAS cards were chosen after that purchase. A decade was
needed so many thanks to Adaptec/Microchip/PMC for not caring about their
customers buying such an expensive HBA hardware and putting trouble in SCSI
folks. Two versions of SAS and PCIe have been released till this was fixed
going to SAS-4(24GB/s) from SAS-2(6Gb/s) and PCIe 5 from PCIe 3...

Thanks again to everyone involved in this, we can now remove the card from
storage and use it :)

Keep up the good work!

Take care

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux