On 2023-09-22 05:29, Wenchao Hao wrote:
Add new module param "allow_restart" to control if setup scsi_device's allow_restart flag. This is used to test scsi command finished with sense_key 0x6, asc 0x4 and ascq 0x2 Signed-off-by: Wenchao Hao <haowenchao2@xxxxxxxxxx>
Hi, Looked at this and verified that the allow_restart flag of scsi_debug devices (disks ?) is usually 0 and when the scsi_debug module is started with allow_restart=1 then the allow_restart flag does indeed change to 1. For example: # cat /sys/class/scsi_disk/1\:0\:0\:0/allow_restart 1 That ASC/ASCQ code means: "Logical unit not ready, initializing command required" according to my library. Played around with sg_start but didn't see any change in how it reacts. According to scsi_device.h that flag's description is: "issue START_UNIT in error handler" which implies it changes how the EH handler reacts. Perhaps the 3 line patch description could say a little more about how to use this new parameter... Tested-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx> <snip>
