Linux SCSI

Thread Index

[Prev Page][Next Page]

[PATCH 01/22] fcoe: Fix validation of mac address when checking for spma support
- From: Robert Love <robert.w.love@xxxxxxxxx>
[PATCH 00/22] Open-FCoE Features for 2.6.32
- From: Robert Love <robert.w.love@xxxxxxxxx>
[Bug 13873] New: QLA2xxx driver causes kernel oops with a qla2200
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
Re: [PATCH 01/14] qla2xxx: Modified the driver to pass the residaul UNDERRUN status
- From: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: [PATCH 01/14] qla2xxx: Modified the driver to pass the residaul UNDERRUN status
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH] iscsi: Use GFP_ATOMIC in iscsi_offload_mesg().
- From: "Michael Chan" <mchan@xxxxxxxxxxxx>
[PATCH] sd: Avoid sending extended inquiry to legacy devices
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 07/14] qla2xxx: Handle RSCN's per master/slave vn-port basis.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 03/14] qla2xxx: Skip RSCN processing if the event is global and vp_idx index
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 06/14] qla2xxx: Fix endian issues on PPC platfrom for NPIV.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 08/14] qla2xxx: Corrected one of the IOCB structure to be 64 bytes size
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 04/14] qla2xxx: Mark all devices as lost when fc port is marked
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 13/14] qla2xxx: ISP21xx/22xx do not support FDMI registrations. (fixed)
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 12/14] qla2xxx: Update version number to 8.03.01-k6
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 11/14] qla2xxx: Fix a bug that clears the interrupt status register for the base queue
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 10/14] qla2xxx: Fix to ensure driver works in sinlge queue mode if multiqueue fails.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 09/14] qla2xxx: Update version number to 8.03.01-k5
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 14/14] qla2xxx: Update version number to 8.03.01-k7
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 00/14] qla2xxx: fixes for 2.6.31-rc3 [8.03.01-k5/K6/K7]
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 05/14] qla2xxx: Process DPC requests within valid Fabric topologies.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 02/14] qla2xxx: Correctly handle 'global port-unavailable' AEN.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 01/14] qla2xxx: Modified the driver to pass the residaul UNDERRUN status
- From: giridhar.malavali@xxxxxxxxxx
Re: question about drivers/scsi/aic7xxx/aic79xx_pci.c
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
question about drivers/scsi/aic7xxx/aic79xx_pci.c
- From: Julia Lawall <julia@xxxxxxx>
SCSI git trees
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
question about scsi_tgt_lib.c
- From: Julia Lawall <julia@xxxxxxx>
Re: [RFC][PATCH v2] fix wide port hotplug issues
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH] scsi: consistent use of __u8 in scsi/scsi.h
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
Re: [PATCH] cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
- From: "Anil Veerabhadrappa" <anilgv@xxxxxxxxxxxx>
Re: [PATCH] cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
- From: Mike Christie <michaelc@xxxxxxxxxxx>
Re: [PATCH] cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
- From: "Michael Chan" <mchan@xxxxxxxxxxxx>
Re: [PATCH] cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
- From: Mike Christie <michaelc@xxxxxxxxxxx>
[PATCH] ALUA: send STPG if explicit and implicit is supported
- From: michaelc@xxxxxxxxxxx
Re: [PATCH] scsi_transport_sas: Write outside array bounds
- From: Jeff Garzik <jeff@xxxxxxxxxx>
[2.6.31-rc PATCH] libfc: fix a circular locking warning during sending RRQ
- From: Robert Love <robert.w.love@xxxxxxxxx>
Re: [PATCH] scsi_transport_sas: Write outside array bounds
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/6] RFC: beiscsi : handles core routines
- From: Rolf Eike Beer <eike-kernel@xxxxxxxxx>
Re: [PATCH] scsi_transport_sas: Write outside array bounds
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: Regression impacts ServeRAID II on IBM xSeries 5500
- From: David Newall <davidn@xxxxxxxxxxxxxxx>
[Bug 13273] Error by disconnecting USB flash storage in 2.6.30-rc5 x86-64
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH] scsi_transport_sas: Write outside array bounds
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH] fc_transport: Correct max fc_host attribute count
- From: James Smart <James.Smart@xxxxxxxxxx>
[PATCH] u14-34f: Buffer overflow
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
Re: [PATCH] fc_transport: Write outside array bounds
- From: James Smart <James.Smart@xxxxxxxxxx>
[PATCH] ipr: Buffer overflow
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
Re: [PATCH 1/6] RFC: beiscsi : handles core routines
- From: Rolf Eike Beer <eike-kernel@xxxxxxxxx>
[PATCH] fc_transport: Write outside array bounds
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
Re: SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: rohan a <info1686@xxxxxxxxx>
[PATCH] gdth: Buffer overflow
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
[PATCH] scsi_transport_sas: Write outside array bounds
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
[PATCH 6/6] RFC: beiscsi: modified MAINTAINERS
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
[PATCH 5/6] RFC: beiscsi: Makefile and Kconfig
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
[PATCH 4/6] RFC: beiscsi: Firmware Commands to chip
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
[PATCH 3/6] RFC: beiscsi: iscsi hook in and handling code
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
[PATCH 2/6] RFC: beiscsi: Low Level routines
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
[PATCH 1/6] RFC: beiscsi : handles core routines
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
RFC: beiscsi driver
- From: Jayamohan Kallickal <jayamohank@xxxxxxxxxxxxxxxxx>
Re: Regression impacts ServeRAID II on IBM xSeries 5500
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[PATCH] dm mpath: Skip calling activate_path if the path is already failed
- From: "Moger, Babu" <Babu.Moger@xxxxxxx>
Re: [PATCH] cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
- From: David Miller <davem@xxxxxxxxxxxxx>
RE: [Open-FCoE] [net-next-2.6 PATCH 5/5] fcoe: Use NETIF_F_FCOE_MTU flag to set up max frame size (lport->mfs)
- From: "Zou, Yi" <yi.zou@xxxxxxxxx>
[PATCH 8/12] drivers/scsi/fcoe: Correct redundant test
- From: Julia Lawall <julia@xxxxxxx>
[PATCH 7/12] drivers/scsi/aacraid: Correct redundant test
- From: Julia Lawall <julia@xxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [PATCH] Don't export scsi kernel variables in userspace headers.
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH] Don't export scsi kernel variables in userspace headers.
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: [PATCH] Don't export scsi kernel variables in userspace headers.
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Tarkan Erimer <tarkan.erimer@xxxxxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
2.6.31-rc4: Reported regressions 2.6.29 -> 2.6.30
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
2.6.31-rc4: Reported regressions from 2.6.30
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
Re: [Patch RFC 14/37] scsi: aacraid semaphore cleanup
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Re: [PATCH] Don't export scsi kernel variables in userspace headers.
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [Patch RFC 14/37] scsi: aacraid semaphore cleanup
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [Open-FCoE] [net-next-2.6 PATCH 5/5] fcoe: Use NETIF_F_FCOE_MTU flag to set up max frame size (lport->mfs)
- From: David Miller <davem@xxxxxxxxxxxxx>
[PATCH] Do not set DMA mask to 32 bit first if adapter only supports 31
- From: Rolf Eike Beer <eike-kernel@xxxxxxxxx>
[PATCH] eata: Buffer overflow
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
[PATCH] ibmmca: Buffer overflow
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
3-way deadlock during fc_remove_host
- From: Joe Eykholt <jeykholt@xxxxxxxxx>
3-way deadlock during fc_remove_host
- From: Joe Eykholt <jre@xxxxxxxxxxxxxxxx>
Re: [PATCH] scsi: remove superfluous NULL pointer check from scsi_kill_request()
- From: Joe Perches <joe@xxxxxxxxxxx>
Re: [PATCH] scsi: remove superfluous NULL pointer check from scsi_kill_request()
- From: Joe Perches <joe@xxxxxxxxxxx>
[PATCH] scsi: remove superfluous NULL pointer check from scsi_kill_request()
- From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
[PATCH 14/14] bfa: Brocade BFA FC SCSI driver (maint)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 13/14] bfa: Brocade BFA FC SCSI driver (makefile)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 12/14] bfa: Brocade BFA FC SCSI driver (include part-3)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 11/14] bfa: Brocade BFA FC SCSI driver (include part-2)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 10/14] bfa: Brocade BFA FC SCSI driver (include part-1)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 9/14] bfa: Brocade BFA FC SCSI driver (fcs part-4)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 8/14] bfa: Brocade BFA FC SCSI driver (fcs part-3)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 7/14] bfa: Brocade BFA FC SCSI driver (fcs part-2)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 6/14] bfa: Brocade BFA FC SCSI driver (fcs part-1)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 5/14] bfa: Brocade BFA FC SCSI driver (bfa part-4)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 4/14] bfa: Brocade BFA FC SCSI driver (bfa part-3)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 3/14] bfa: Brocade BFA FC SCSI driver (bfa part-2)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 2/14] bfa: Brocade BFA FC SCSI driver (bfa part-1)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 1/14] bfa: Brocade BFA FC SCSI driver (bfad)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 0/14] bfa: Brocade BFA FC SCSI driver (overview)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Kernel panic: 2.6.29.6 with Megaraid
- From: Joe Feise <jfeise@xxxxxxxxx>
[PATCH] Don't export scsi kernel variables in userspace headers.
- From: Dave Jones <davej@xxxxxxxxxx>
Re: Regression impacts ServeRAID II on IBM xSeries 5500
- From: David Newall <davidn@xxxxxxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Tarkan Erimer <tarkan.erimer@xxxxxxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Tarkan Erimer <tarkan.erimer@xxxxxxxxxxxxxx>
[BISECTED] Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Tarkan Erimer <tarkan.erimer@xxxxxxxxxxxxxx>
Re: [PATCH 2 2/4] cciss: use mutex instead of flag to indicate busy initializing
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] cleanup FlashPoint_HardwareResetHostAdapter()
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
[PATCH 1/3] qla2xxx: Fix to ensure driver works in sinlge queue mode if multiqueue fails.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 3/3] qla2xxx: Update version number to 8.03.01-k6
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 2/3] qla2xxx: Fix a bug that clears the interrupt status register for the base queue
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 0/3] qla2xxx: fixes for 2.6.31-rc3 [8.03.01-k6]
- From: giridhar.malavali@xxxxxxxxxx
Re: [Open-FCoE] [net-next-2.6 PATCH 5/5] fcoe: Use NETIF_F_FCOE_MTU flag to set up max frame size (lport->mfs)
- From: Robert Love <robert.w.love@xxxxxxxxx>
Re: [Open-FCoE] [net-next-2.6 PATCH 5/5] fcoe: Use NETIF_F_FCOE_MTU flag to set up max frame size (lport->mfs)
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [Open-FCoE] [net-next-2.6 PATCH 5/5] fcoe: Use NETIF_F_FCOE_MTU flag to set up max frame size (lport->mfs)
- From: Robert Love <robert.w.love@xxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[PATCH] cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
- From: "Michael Chan" <mchan@xxxxxxxxxxxx>
Re: Regression impacts ServeRAID II on IBM xSeries 5500
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[net-next-2.6 PATCH 3/5] net: Add NETIF_F_FCOE_MTU to indicate support for a different MTU for FCoE
- From: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
[net-next-2.6 PATCH 5/5] fcoe: Use NETIF_F_FCOE_MTU flag to set up max frame size (lport->mfs)
- From: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
[net-next-2.6 PATCH 4/5] ixgbe: Add support for NETIF_F_FCOE_MTU to 82599 devices
- From: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
[net-next-2.6 PATCH 2/5] ixgbe: updates vlan feature flags to enable FCoE offloads on vlan interface
- From: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
[net-next-2.6 PATCH 1/5] vlan: adds fcoe offload related net_device_ops and updates fcoe_ddp_xid field
- From: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Re: Unusual unusual device Sony-Ericsson W760i
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: rohan a <info1686@xxxxxxxxx>
[PATCH 6/6] bfa: Brocade BFA FC SCSI driver (maint)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 5/6] bfa: Brocade BFA FC SCSI driver (make)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 1/6] bfa: Brocade BFA FC SCSI driver (bfad)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 0/6] bfa: Brocade BFA FC SCSI driver (overview)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 2 3/4] cciss: use only one scan thread
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 2 2/4] cciss: use mutex instead of flag to indicate busy initializing
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 2 1/4] cciss: remove logical drive sysfs entries during driver cleanup.
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 2 0/4] cciss rmmod/scan-thread fixes
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 2 4/4] cciss: kick off logical drive topology rescan through sysfs
- From: Andrew Patterson <andrew.patterson@xxxxxx>
Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Eddie Williams <Eddie.Williams@xxxxxxxxxxxx>
[PATCH 9/9] qla2xxx: Update version number to 8.03.01-k5
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 8/9] qla2xxx: Corrected one of the IOCB structure to be 64 bytes size
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 5/9] qla2xxx: Process DPC requests within valid Fabric topologies.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 6/9] qla2xxx: Fix endian issues on PPC platfrom for NPIV.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 7/9] qla2xxx: Handle RSCN's per master/slave vn-port basis.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 4/9] qla2xxx: Mark all devices as lost when fc port is marked
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 2/9] qla2xxx: Correctly handle 'global port-unavailable' AEN.
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 3/9] qla2xxx: Skip RSCN processing if the event is global and vp_idx index
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 1/9] qla2xxx: Modified the driver to pass the residaul UNDERRUN status
- From: giridhar.malavali@xxxxxxxxxx
[PATCH 0/9] qla2xxx: fixes for 2.6.31-rc3 [8.03.01-k5]
- From: giridhar.malavali@xxxxxxxxxx
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: Recommended HBA management interfaces
- From: Drew <drew.kay@xxxxxxxxx>
Re: Recommended HBA management interfaces
- From: James Smart <James.Smart@xxxxxxxxxx>
RE: Recommended HBA management interfaces
- From: "Mukker, Atul" <Atul.Mukker@xxxxxxx>
Re: Recommended HBA management interfaces
- From: Drew <drew.kay@xxxxxxxxx>
RE: Recommended HBA management interfaces
- From: "Mukker, Atul" <Atul.Mukker@xxxxxxx>
Re: Recommended HBA management interfaces
- From: James Smart <James.Smart@xxxxxxxxxx>
[PATCH] cleanup FlashPoint_HardwareResetHostAdapter()
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
RE: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: "Desai, Kashyap" <Kashyap.Desai@xxxxxxx>
RE: mptspi: Unexpected doorbell active!
- From: "Desai, Kashyap" <Kashyap.Desai@xxxxxxx>
Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Tarkan Erimer <tarkan.erimer@xxxxxxxxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 2/3] scsi_dh: Provide set_params interface in emc device handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: Backport of: [SCSI] sg: fix races during device removal--OK?
- From: Paul Smith <paul@xxxxxxxxxxxxxxxxx>
RE: Recommended HBA management interfaces
- From: "Mukker, Atul" <Atul.Mukker@xxxxxxx>
Re: Recommended HBA management interfaces
- From: James Smart <James.Smart@xxxxxxxxxx>
RE: Recommended HBA management interfaces
- From: "Mukker, Atul" <Atul.Mukker@xxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: Recommended HBA management interfaces
- From: James Smart <James.Smart@xxxxxxxxxx>
RE: Recommended HBA management interfaces
- From: "Mukker, Atul" <Atul.Mukker@xxxxxxx>
Re: [PATCH] drivers/scsi: possible double spin_lock_irqsave
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Eddie Williams <Eddie.Williams@xxxxxxxxxxxx>
Re: [PATCH 2/3] scsi_dh: Provide set_params interface in emc device handler
- From: Eddie Williams <Eddie.Williams@xxxxxxxxxxxx>
Re: SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: Hannes Reinecke <hare@xxxxxxx>
Possible memory leak via scsi_sysfs_initialize
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
[Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH 1/5] bfa: Brocade BFA FC SCSI driver (bfad)
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: [PATCH 4/5] bfa: Brocade BFA FC SCSI driver (make)
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
[PATCH 4/5] bfa: Brocade BFA FC SCSI driver (make)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 1/5] bfa: Brocade BFA FC SCSI driver (bfad)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 5/5] bfa: Brocade BFA FC SCSI driver (maint)
- From: Jing Huang <huangj@xxxxxxxxxxx>
[PATCH 0/5] bfa: Brocade BFA FC SCSI driver (overview)
- From: Jing Huang <huangj@xxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 6/10] drivers/scsi: Move a dereference below a NULL test
- From: Julia Lawall <julia@xxxxxxx>
[Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[Patch 8/8] lpfc 8.3.4: Update driver version to 8.3.4
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 7/8] lpfc 8.3.4: Remove spaces before newlines in several log messages
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 6/8] lpfc 8.3.4: Add bsg (SGIOv4) support for ELS/CT support
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 5/8] lpfc 8.3.4: NPIV vport fixes
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 4/8] lpfc 8.3.4: Fix a pair of FCoE issues
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 3/8] lpfc 8.3.4: Various SLI3 fixes
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 2/8] lpfc 8.3.4: Consistently Implement persistent port disable
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 1/8] lpfc 8.3.4: Various SLI4 fixes
- From: James Smart <James.Smart@xxxxxxxxxx>
[Patch 0/8] lpfc 8.3.4: Update lpfc driver to revision 8.3.4
- From: James Smart <James.Smart@xxxxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[PATCH] drivers/scsi: possible double spin_lock_irqsave
- From: Julia Lawall <julia@xxxxxxx>
[Bug 9872] Driver 'sd' needs updating - please use bus_type methods
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Peter Jones <pjones@xxxxxxxxxx>
RE: [PATCH] fnic: clean up
- From: "Abhijeet Joglekar (abjoglek)" <abjoglek@xxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: Recommended HBA management interfaces
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Peter Jones <pjones@xxxxxxxxxx>
Re: Backport of: [SCSI] sg: fix races during device removal--OK?
- From: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>
Recommended HBA management interfaces
- From: "Mukker, Atul" <Atul.Mukker@xxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[RFC][PATCH v2] fix wide port hotplug issues
- From: "jack wang" <jack_wang@xxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Backport of: [SCSI] sg: fix races during device removal--OK?
- From: Paul Smith <paul@xxxxxxxxxxxxxxxxx>
[Bug 13311] mptsas: ioc0: removing ssp device, kernel oops
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: deterministic scsi order with async scan
- From: david@xxxxxxx
[PATCH 2/2] Add interface to set default value to scsi timeout variables
- From: Takahiro Yasui <tyasui@xxxxxxxxxx>
[PATCH 1/2] Limit scsi timeout count per device
- From: Takahiro Yasui <tyasui@xxxxxxxxxx>
[PATCH 0/2] Introduce the parameter to limit scsi timeout count (take 3)
- From: Takahiro Yasui <tyasui@xxxxxxxxxx>
Re: [RFC][PATCH 4/5] fix wide port hotplug issues
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: deterministic scsi order with async scan
- From: Matthew Wilcox <matthew@xxxxxx>
Re: deterministic scsi order with async scan
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: deterministic scsi order with async scan
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: deterministic scsi order with async scan
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: deterministic scsi order with async scan
- From: david@xxxxxxx
Re: deterministic scsi order with async scan
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: deterministic scsi order with async scan
- From: david@xxxxxxx
Re: deterministic scsi order with async scan
- From: James Smart <James.Smart@xxxxxxxxxx>
Re: deterministic scsi order with async scan
- From: david@xxxxxxx
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: deterministic scsi order with async scan
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: deterministic scsi order with async scan
- From: david@xxxxxxx
Re: deterministic scsi order with async scan
- From: david@xxxxxxx
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: Pending patches
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] fcoe: Use %pM conversion specifier
- From: Tobias Klauser <klto@xxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Wilcox <matthew@xxxxxx>
Re: deterministic scsi order with async scan
- From: Matthew Wilcox <matthew@xxxxxx>
Re: deterministic scsi order with async scan
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[PATCH] fnic: clean up
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
[PATCH] fcoe: Use %pM conversion specifier
- From: Tobias Klauser <klto@xxxxxxx>
RE: NULL check after starget_to_rport()?
- From: "Abhijeet Joglekar (abjoglek)" <abjoglek@xxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Tejun Heo <tj@xxxxxxxxxx>
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 13783] udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 13783] New: udev causes high cpu usage
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH 0/3] cciss rmmod/scan-thread fixes
- From: Andrew Patterson <andrew.patterson@xxxxxx>
Re: [PATCH 2/3] cciss: use only one scan thread
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/3] cciss: use only one scan thread
- From: Andrew Patterson <andrew.patterson@xxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
deterministic scsi order with async scan
- From: david@xxxxxxx
Re: Pending patches
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH 3/4] libata: Make it possible for host drivers to flag hotplug ports
- From: Matthew Garrett <mjg@xxxxxxxxxx>
[PATCH 4/4] libata: Allow AHCI to flag ports as not hotpluggable
- From: Matthew Garrett <mjg@xxxxxxxxxx>
[PATCH 2/4] libata: Flag most SATA ports as hotpluggable
- From: Matthew Garrett <mjg@xxxxxxxxxx>
[PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
- From: Matthew Garrett <mjg@xxxxxxxxxx>
Re: [PATCH 0/3] cciss rmmod/scan-thread fixes
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/3] cciss: use only one scan thread
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] fcoe: convert to %pM
- From: Robert Love <robert.w.love@xxxxxxxxx>
NULL check after starget_to_rport()?
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
[PATCH 5/6] qla4xxx: Fix srb lookup in qla4xxx_eh_device_reset
- From: michaelc@xxxxxxxxxxx
[PATCH 6/6] qla4xxx: Remove hiwat code so scsi eh does not get escalated when we can make progress
- From: michaelc@xxxxxxxxxxx
[PATCH 4/6] qla4xxx: Fix Driver Fault Recovery Completion
- From: michaelc@xxxxxxxxxxx
[PATCH 2/6] qla4xxx: Correct Extended Sense Data Errors
- From: michaelc@xxxxxxxxxxx
[PATCH 3/6] qla4xxx: add timeout handler
- From: michaelc@xxxxxxxxxxx
[PATCH 1/6] libiscsi: disable bh in and abort handler.
- From: michaelc@xxxxxxxxxxx
iscsi bugfixes for 2.6.31-rc take 2
- From: michaelc@xxxxxxxxxxx
Re: [PATCH] SCSI: lpfc, don't dereference NULL
- From: James Smart <James.Smart@xxxxxxxxxx>
Re: [PATCH 0/6] iscsi bug fixes for 2.6.31-rc
- From: Mike Christie <michaelc@xxxxxxxxxxx>
Pending patches
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Joe Eykholt <jeykholt@xxxxxxxxx>
[PATCH] fcoe: convert to %pM
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Re: SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: rohan a <info1686@xxxxxxxxx>
Re: Scsi tape write protect status question
- From: Mark Hounschell <dmarkh@xxxxxxxxxx>
Re: [PATCH 3/4] block: implement mixed merge of different failfast requests
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1 Fails To Recognize Some USB Disks
- From: Tarkan Erimer <tarkan.erimer@xxxxxxxxxxxxxx>
Re: The return of the sense data
- From: 谢纲 <xiegang112@xxxxxxxxx>
Re: SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: rohan a <info1686@xxxxxxxxx>
The return of the sense data
- From: 谢纲 <xiegang112@xxxxxxxxx>
SCSI command (SP-OUT) failing on SLES 9 32-bit
- From: rohan a <info1686@xxxxxxxxx>
[PATCH 0/3] cciss rmmod/scan-thread fixes
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 1/3] cciss: remove logical drive sysfs entries during driver cleanup.
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 3/3] cciss: kick off logical drive topology rescan through sysfs
- From: Andrew Patterson <andrew.patterson@xxxxxx>
[PATCH 2/3] cciss: use only one scan thread
- From: Andrew Patterson <andrew.patterson@xxxxxx>
Re: Scsi tape write protect status question
- From: "Mark Hounschell" <markh@xxxxxxxxxx>
Scsi tape write protect status question
- From: Mark Hounschell <markh@xxxxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH]: Rename REQ_COPY_USER to more descriptive REQ_HAS_TAIL_SPACE_FOR_PADDING
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH v2]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[PATCH] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: John Stoffel <john@xxxxxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
ata1: failed to reset engine (errno=-95)
- From: Bo Liu <bo-liu@xxxxxxxxxxx>
[PATCH 0/6] iscsi bug fixes for 2.6.31-rc
- From: Mike Christie <michaelc@xxxxxxxxxxx>
[PATCH 2/6] qla4xxx: Correct Extended Sense Data Errors
- From: michaelc@xxxxxxxxxxx
[PATCH 6/6] qla4xxx: Removed unnecessary hiwat code
- From: michaelc@xxxxxxxxxxx
[PATCH 4/6] qla4xxx: Driver Fault Recovery
- From: michaelc@xxxxxxxxxxx
[PATCH 3/6] qla4xxx: add timeout handler
- From: michaelc@xxxxxxxxxxx
[PATCH 5/6] qla4xxx: Fix srb lookup in qla4xxx_eh_device_reset
- From: michaelc@xxxxxxxxxxx
[PATCH 1/6] libiscsi: disable bh in and abort handler.
- From: michaelc@xxxxxxxxxxx
[PATCH] SCSI: lpfc, don't dereference NULL
- From: Jiri Slaby <jirislaby@xxxxxxxxx>
[PATCH 3/3] libata: Migrate ACPI code over to new bindings
- From: Matthew Garrett <mjg@xxxxxxxxxx>
[PATCH 2/3] libata: Bind the Linux device tree to the ACPI device tree
- From: Matthew Garrett <mjg@xxxxxxxxxx>
[PATCH 1/3] SCSI: Allow platform-specific code to be run against the SCSI tree
- From: Matthew Garrett <mjg@xxxxxxxxxx>
[PATCH 3/4] drivers/scsi: adjust NULL test
- From: Julia Lawall <julia@xxxxxxx>
Fix __LITTLE_ENDIAN definition warnings in qla2xxx
- From: Dave Jones <davej@xxxxxxxxxx>
Re: [PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: "John Stoffel" <john@xxxxxxxxxxx>
[PATCH] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: John Stoffel <john@xxxxxxxxxxx>
[PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: John Stoffel <john@xxxxxxxxxxx>
[patch 06/13] zfcp: Use -EIO for SBAL allocation failures
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 00/13] zfcp fixes for 2.6.31-rc2
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 11/13] zfcp: avoid double notify in lowmem scenario
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 04/13] zfcp: Use correct flags for zfcp_erp_notify
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 08/13] zfcp: Fix erp escalation procedure
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 05/13] zfcp: Use unchained mode for small ct and els requests
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 12/13] zfcp: Fix wka port processing
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 09/13] zfcp: Recover from stalled outbound queue
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 02/13] zfcp: Acquire qdio_stat_lock when reading the queue utilization
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 13/13] zfcp: Fix tracing of request id for abort requests
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 10/13] zfcp: Add port only once to FC transport class
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 07/13] zfcp: Fix logic for physical port close
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 03/13] zfcp: Return -ENOMEM for allocation failures in zfcp_fsf
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[patch 01/13] zfcp: Fix invalid command order
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
[ANNOUNCE]: SCST target driver for QLocic 24xx adapters qla_isp 1.0.1 released
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [GIT PULL resend] exofs/osd tree for 2.6.31-rc2
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: [PATCH] x86/pci: insert ioapic resource before assign unassigned resource for pci -v2
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Re: How to know the completion of SCSI scan?
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [PATCH] x86/pci: insert ioapic resource before assign unassigned resource for pci -v2
- From: Jesse Barnes <jesse.barnes@xxxxxxxxx>
[PATCH] x86/pci: insert ioapic resource before assign unassigned resource for pci -v2
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
Re: [dm-devel] Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Eddie Williams <Eddie.Williams@xxxxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Joe Eykholt <jeykholt@xxxxxxxxx>
Re: 2.6.31-rc2: Reported regressions from 2.6.30
- From: Andres Freund <andres@xxxxxxxxxxx>
Re: [dm-devel] Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: 2.6.31-rc2: Reported regressions from 2.6.30
- From: John Dykstra <john.dykstra1@xxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: Yinghai Lu <yhlu.kernel@xxxxxxxxx>
Re: [PATCH} x86/pci: insert ioapic resource before assign unassigned resource for pci
- From: dann frazier <dannf@xxxxxx>
[PATCH} x86/pci: insert ioapic resource before assign unassigned resource for pci
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
Re: [PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: "Anil Veerabhadrappa" <anilgv@xxxxxxxxxxxx>
Re: mptspi: Unexpected doorbell active!
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: "Anil Veerabhadrappa" <anilgv@xxxxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
Re: [PATCH]: New implementation of scsi_execute_async()
- From: Joe Eykholt <jeykholt@xxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: dann frazier <dannf@xxxxxx>
Re: [PATCH]: Rename REQ_COPY_USER to more descriptive REQ_HAS_TAIL_SPACE_FOR_PADDING
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH]: Rename REQ_COPY_USER to more descriptive REQ_HAS_TAIL_SPACE_FOR_PADDING
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
[PATCH]: New implementation of scsi_execute_async()
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
[PATCH]: Rename REQ_COPY_USER to more descriptive REQ_HAS_TAIL_SPACE_FOR_PADDING
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: Mike Christie <michaelc@xxxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: [PATCH 3/5] reuse the original port when reenable the phy in a port
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: "Anil Veerabhadrappa" <anilgv@xxxxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Re: [PATCH] block: fix sg SG_DXFER_TO_FROM_DEV regression
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
[PATCH] cciss: fix spinlock use
- From: Tomas Henzl <thenzl@xxxxxxxxxx>
Re: [PATCH 3/4] block: implement mixed merge of different failfast requests
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
How to know the completion of SCSI scan?
- From: 谢纲 <xiegang112@xxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: "Michael Chan" <mchan@xxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Maciej Rutecki <maciej.rutecki@xxxxxxxxx>
Re: [PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: Mike Christie <michaelc@xxxxxxxxxxx>
Re: Re: Performance degradation seen after using one list for hot/cold pages.
- From: NARAYANAN GOPALAKRISHNAN <narayanan.g@xxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 3/5] reuse the original port when reenable the phy in a port
- From: "tom" <tom_peng@xxxxxxxxx>
[PATCH] BNX2I: register given device with cnic if shost != NULL in ep_connect()
- From: "Anil Veerabhadrappa" <anilgv@xxxxxxxxxxxx>
Re: [PATCH 3/4] block: implement mixed merge of different failfast requests
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [dm-devel] REQUEST for new 'topology' metrics to be moved out of the 'queue' sysfs directory.
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH] block: fix sg SG_DXFER_TO_FROM_DEV regression
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH] block: fix sg SG_DXFER_TO_FROM_DEV regression
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Performance degradation seen after using one list for hot/cold pages.
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Peter Jones <pjones@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Peter Jones <pjones@xxxxxxxxxx>
Re: [PATCH 3/5] reuse the original port when reenable the phy in a port
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: [PATCH 0/3] scsi_dh: Make scsi device handler modulesautomatically inserted
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Maciej Rutecki <maciej.rutecki@xxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: mptspi: Unexpected doorbell active!
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: mptspi: Unexpected doorbell active!
- From: Grant Grundler <grundler@xxxxxxxxxx>
[ANNOUNCE]: SCST Target driver support for Emulex lpfc FC/FCoE adapters
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Daniel Walker <dwalker@xxxxxxxxxx>
[PATCH 27/44] includecheck fix: drivers/scsi, libfcoe.c
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
[PATCH 28/44] includecheck fix: drivers/scsi, ibmvscsi.c
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
RE: [PATCH 0/3] scsi_dh: Make scsi device handler modulesautomatically inserted
- From: <berthiaume_wayne@xxxxxxx>
Re: mptspi: Unexpected doorbell active!
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
mptspi: Unexpected doorbell active!
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Maciej Rutecki <maciej.rutecki@xxxxxxxxx>
Re: [dm-devel] REQUEST for new 'topology' metrics to be moved out of the 'queue' sysfs directory.
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
RE: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: "Desai, Kashyap" <Kashyap.Desai@xxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
Re: [dm-devel] [PATCH]: create sysfs file, dh_state for SCSI devices even if they are not in the inteernal lists
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Peter Jones <pjones@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: John Stoffel <john@xxxxxxxxxxx>
[PATCH 5/5] Make SCSI SG v4 driver enabled by default and remove EXPERIMENTAL dependency, since udev depends on BSG.
- From: John Stoffel <john@xxxxxxxxxxx>
Re: [PATCH] Make SCSI SG v4 driver enabled by default now since udev depends on it.
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: [PATCH] Make SCSI SG v4 driver enabled by default now since udev depends on it.
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[PATCH] Make SCSI SG v4 driver enabled by default now since udev depends on it.
- From: John Stoffel <john@xxxxxxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: Paul Smith <paul@xxxxxxxxxxxxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Eddie Williams <Eddie.Williams@xxxxxxxxxxxx>
Re: 2.6.31-rc2: Reported regressions from 2.6.30
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
Re: [dm-devel] REQUEST for new 'topology' metrics to be moved out of the 'queue' sysfs directory.
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [dm-devel] REQUEST for new 'topology' metrics to be moved out of the 'queue' sysfs directory.
- From: Neil Brown <neilb@xxxxxxx>
Re: 2.6.31-rc2: Reported regressions from 2.6.30
- From: Andres Freund <andres@xxxxxxxxxxx>
2.6.31-rc2: Reported regressions 2.6.29 -> 2.6.30
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
2.6.31-rc2: Reported regressions from 2.6.30
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
Re: [PATCH 0/3] scsi_dh: Make scsi device handler modules automatically inserted
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: Patch - To display FCoE Host information and statistics in sysfs
- From: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: Paul Smith <paul@xxxxxxxxxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: dann frazier <dannf@xxxxxx>
Soft lockup during device discovery on 2.6.31-rc1
- From: "Chauhan, Vijay" <Vijay.Chauhan@xxxxxxx>
[PATCH] block: fix sg SG_DXFER_TO_FROM_DEV regression
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[Bug 13716] The AIC-7892P controller does not work any more
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 13716] The AIC-7892P controller does not work any more
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [Bug 13716] New: The AIC-7892P controller does not work any more
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[Bug 13716] The AIC-7892P controller does not work any more
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [Bug 13716] New: The AIC-7892P controller does not work any more
- From: Matthew Wilcox <matthew@xxxxxx>
[Bug 13716] New: The AIC-7892P controller does not work any more
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
Re: [PATCH 3/4] block: implement mixed merge of different failfast requests
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 2/4] block: use the same failfast bits for bio and request
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[PATCH] scsi_transport_fc: fix kernel-doc param name
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
Re: mptsas, msi and the dl585 g2
- From: dann frazier <dannf@xxxxxx>
Re: [PATCHSET] block: fix merge of requests with different failfast settings
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
When the device task management functions get invoked
- From: Madhavi Manchala <madhavi.lscsi@xxxxxxxxx>
[PATCH 2/4] block: use the same failfast bits for bio and request
- From: Tejun Heo <tj@xxxxxxxxxx>
[PATCH 4/4] scsi,block: update SCSI to handle mixed merge failures
- From: Tejun Heo <tj@xxxxxxxxxx>
[PATCH 1/4] block: don't merge requests of different failfast settings
- From: Tejun Heo <tj@xxxxxxxxxx>
[PATCH 3/4] block: implement mixed merge of different failfast requests
- From: Tejun Heo <tj@xxxxxxxxxx>
[PATCHSET] block: fix merge of requests with different failfast settings
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: kexec kernel failed to restart aacraid device
- From: Joe Jin <joe.jin@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: [PATCH 0/3] scsi_dh: Add ability to set parameters for scsi device handler
- From: Eddie Williams <Eddie.Williams@xxxxxxxxxxxx>
Re: [2.6.27.25] Hang in SCSI sync cache when a disk is removed--?
- From: Paul Smith <paul@xxxxxxxxxxxxxxxxx>
Re: [BUG] Linux-2.6.31-rc1-git9 Cannot Recognize Empty DVD Media
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>

[Index of Archives] [Kernel Announce] [IETF Annouce] [Security] [Netfilter] [Linux ATA RAID] [Bugtraq]