On Tue, Jun 30, 2009 at 11:35:45AM -0700, Yinghai Lu wrote:
> dann frazier wrote:
> > hey,
> > I'm finding problems when booting a dl585g2 w/ an LSISAS1068
> > controller. In brief, this system system stopped booting once MSI
> > became disabled by default in mptbase. Passing the parameter
> > 'mpt_msi_enable_sas=1' to mptbase allows it to work again (tested w/
> > 2.6.30).
> >
> > The symptom is that the system starts up, and we see the following:
> >
> > ======== SNIP =========
> > [ 6.941489] hub 3-2:1.0: USB hub found
> > [ 6.943705] hub 3-2:1.0: 7 ports detected
> > [ 6.992639] Copyright (c) 1999-2008 LSI Corporation
> > [ 7.014262] Fusion MPT SAS Host driver 3.04.07
> > [ 7.021685] mptsas 0000:42:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
> > [ 7.026597] usb 1-6.3: new full speed USB device using ehci_hcd and address 3
> > [ 7.071143] mptbase: ioc0: Initiating bringup
> > [ 7.102198] usb 1-6.3: New USB device found, idVendor=0e34, idProduct=0204
> > [ 7.119107] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [ 7.128171] usb 1-6.3: Product: iPort/USB I2C Host Adapter
> > [ 7.160994] usb 1-6.3: Manufacturer: Silicon Labs
> > [ 7.171468] usb 1-6.3: SerialNumber: 0001248
> > [ 7.174931] usb 1-6.3: configuration #1 chosen from 1 choice
> > [ 7.360010] ioc0: LSISAS1068 B0: Capabilities={Initiator}
> > [ 40.581020] mptbase: ioc0: Initiating recovery
> > [ 71.190560] Clocksource tsc unstable (delta = 4398041105588 ns)
> > [ 81.190160] mptbase: ioc0: Initiating recovery
> > ======== SNIP =========
> >
> > These "Initiating recovery" messages are printed periodically, and the
> > system never recovers.
>
> Dann, that could be : ioapic routing in ACPI DSDT is not right somehow.
>
> please try to move the card to other slot to get some luck.
> or pci=routeirq could help too sometimes.
For the record, I tried moving the card to the other PCI-X slot and
the pci=routeirq boot param, but neither helped.
--
dann frazier
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
