Mike Christie wrote:
> Anil Veerabhadrappa wrote:
> > diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c
> b/drivers/scsi/bnx2i/bnx2i_iscsi.c
> > index f741219..98148f3 100644
> > --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
> > +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
> > @@ -1653,15 +1653,18 @@ static struct iscsi_endpoint
> *bnx2i_ep_connect(struct Scsi_Host *shost,
> > struct iscsi_endpoint *ep;
> > int rc = 0;
> >
> > - if (shost)
> > + if (shost) {
> > /* driver is given scsi host to work with */
> > hba = iscsi_host_priv(shost);
> > - else
> > + /* Register the device with cnic if not already
> done so */
> > + bnx2i_register_device(hba);
> > + } else
> > /*
> > * check if the given destination can be reached through
> > * a iscsi capable NetXtreme2 device
> > */
> > hba = bnx2i_check_route(dst_addr);
> > +
> > if (!hba) {
> > rc = -ENOMEM;
> > goto check_busy;
>
> Do you want to do the test_bit(BNX2I_CNIC_REGISTERED,
> &hba->reg_with_cnic) test here instead of down below. If it
> failed then
> you might try to do a cm_create on a cnic that is not
> properly registered.
>
Good idea. cm_create() will properly be ok because there is no
hardware interaction. bnx2i_send_conn_ofld_req() will fail if
the cnic is not properly registered because there will be no call
backs from the hardware events.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
