Linux SCSI

• Thread Index

• Re: [PATCH][V2] scsi: qla2xxx: remove redundant null check on pointer sess
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 09/11] qla2xxx: Fix code indentation for qla27xx_fwdt_entry
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 08/11] qla2xxx: Move marker request behind QPair
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 11/11] qla2xxx: Update driver version to 10.00.00.14-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 05/11] qla2xxx: Prevent multiple ADISC commands per session
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 04/11] qla2xxx: Check for FW started flag before aborting
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 02/11] qla2xxx: Add First Burst support for FC-NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 01/11] qla2xxx: Fix LUN discovery if loop id is not assigned yet by firmware
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 1/5] libiscsi: Use scsi_[gs]et_resid() where appropriate
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [RESEND PATCH] libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Lee Duncan <lduncan@xxxxxxxx>
• [PATCH] scsi: aacraid: Fix missing break in switch statement
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.0-rc
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
  • From: dann frazier <dann.frazier@xxxxxxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.0-rc
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 0/7] Add FOLL_LONGTERM to GUP fast and use it
  • From: Ira Weiny <ira.weiny@xxxxxxxxx>
• Re: [PATCHv4] fcoe: make use of fip_mode enum complete
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCHv4] fcoe: make use of fip_mode enum complete
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• kernel panic in late shutdown stage (after syncing) in _scsih_set_satl_pending() in mpt3sas
  • From: Michal Soltys <soltys@xxxxxxxx>
• Re: [PATCH] sd: disable logical block provisioning if 'lbpme' is not set
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCHv4] fcoe: make use of fip_mode enum complete
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] scsi: megaraid_sas: return error when create DMA pool failed in megasas_alloc_cmds()
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v3] fcoe: make use of fip_mode enum complete
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH][V2] scsi: qla2xxx: remove redundant null check on pointer sess
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v3] fcoe: make use of fip_mode enum complete
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH RFC v2] fcoe: make use of fip_mode enum complete
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] scsi: reset host byte in DID_NEXUS_FAILURE case
  • From: Christoph Hellwig <hch@xxxxxx>
• [v1 7/7] mpt3sas: Update mpt3sas driver version to 28.100.00.00
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 6/7] mpt3sas: Improve the threshold value and introduce module param.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 5/7] mpt3sas: Load balance to improve performance and avoid soft lockups.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 4/7] mpt3sas: Irq poll to avoid CPU hard lockups.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 3/7] mpt3sas: Select IRQ_POLL to avoid build error.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 2/7] mpt3sas: simplify interrupt handler.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 1/7] mpt3sas: Fix typo in request_desript_type.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [v1 0/7] Irq poll to address cpu lockup.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH RFC v2] fcoe: make use of fip_mode enum complete
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: aic94xx: fix module loading
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: reset host byte in DID_NEXUS_FAILURE case
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 52/77] scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 53/77] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 44/65] scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 45/65] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 28/40] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 17/27] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 13/20] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 10/16] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 43/65] scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 51/77] scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] scsi: reset host byte in DID_NEXUS_FAILURE case
  • From: Martin Wilck <mwilck@xxxxxxxx>
• Re: [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• [PATCH] sd: disable logical block provisioning if 'lbpme' is not set
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH v2 08/12] qla2xxx: Add workqueue to delete fcport from bsg sp->free().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 06/12] qla2xxx: Add support for setting port speed
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] Move debug messages before sending srb preventing panic
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH] scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] qla2xxx - Move debug messages before sending srb preventing panic
  • From: Bill Kuzeja <William.Kuzeja@xxxxxxxxxxx>
• [PATCH] Move debug messages before sending srb preventing panic
  • From: Bill Kuzeja <William.Kuzeja@xxxxxxxxxxx>
• [PATCH] scsi: target: move spin_lock_bh to spin_lock in tasklet
  • From: Zhiwei Jiang <qq282012236@xxxxxxxxx>
• Re: [Lsf-pc] LSF/MM 2019: Call for Proposals (UPDATED!)
  • From: Michal Hocko <mhocko@xxxxxxxxxx>
• Re: [PATCH 3/6] mpt3sas: Irq poll to avoid CPU hard lockups.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: John Garry <john.garry@xxxxxxxxxx>
• 答复: [PATCH v2 3/3] scsi: ufs: Add HI3670 SoC UFS driver support
  • From: "liwei (CM)" <liwei213@xxxxxxxxxx>
• 答复: [PATCH v2 2/3] arm64: dts: hisilicon: hi3670: Add UFS controller support
  • From: "liwei (CM)" <liwei213@xxxxxxxxxx>
• 答复: [PATCH v2 1/3] dt-bindings: ufs: Add HI3670 UFS controller binding
  • From: "liwei (CM)" <liwei213@xxxxxxxxxx>
• [PATCH v2] scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH] scsi: qla2xxx: remove redundant null check on pointer sess
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 6/6] mpt3sas: Update mpt3sas driver version to 28.100.00.00
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 5/6] mpt3sas: Improve the threshold value and introduce module param.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 4/6] mpt3sas: Load balance to improve performance and avoid soft lockups.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 3/6] mpt3sas: Irq poll to avoid CPU hard lockups.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 2/6] mpt3sas: simplify interrupt handler.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 1/6] mpt3sas: Fix typo in request_desript_type.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 0/6] Irq poll to address cpu lockup.
  • From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH] scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH] scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix a handful of indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qlogicpti: Use of_node_name_eq for node name comparisons
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 3/3] scsi: ufs: Add HI3670 SoC UFS driver support
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH -next] scsi: lpfc: Remove set but not used variable 'phys_id'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v2 08/12] qla2xxx: Add workqueue to delete fcport from bsg sp->free().
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 06/12] qla2xxx: Add support for setting port speed
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 0/8] phy: qcom-ufs: Enable regulators to be off in suspend
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v4 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v4 7/8] phy: qcom: Utilize UFS reset controller
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v4 8/8] phy: ufs-qcom: Refactor all init steps into phy_poweron
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH V2 0/7] Add FOLL_LONGTERM to GUP fast and use it
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 4/7] mm/gup: Add FOLL_LONGTERM capability to GUP fast
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 3/7] mm/gup: Change GUP fast to use flags rather than a write 'bool'
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 7/7] IB/mthca: Use the new FOLL_LONGTERM flag to get_user_pages_fast()
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 5/7] IB/hfi1: Use the new FOLL_LONGTERM flag to get_user_pages_fast()
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 6/7] IB/qib: Use the new FOLL_LONGTERM flag to get_user_pages_fast()
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 1/7] mm/gup: Replace get_user_pages_longterm() with FOLL_LONGTERM
  • From: ira.weiny@xxxxxxxxx
• [PATCH V2 2/7] mm/gup: Change write parameter to flags in fast walk
  • From: ira.weiny@xxxxxxxxx
• Re: [PATCH 3/4] bfa: fix calls to dma_set_mask_and_coherent()
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix a handful of indentation issues
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Omar Sandoval <osandov@xxxxxxxxxxx>
• [PATCH v2 09/12] qla2xxx: Move marker request behind QPair
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 12/12] qla2xxx: Update driver version to 10.00.00.14-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 11/12] qla2xxx: Add new FW dump template entry types
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 10/12] qla2xxx: Fix code indentation for qla27xx_fwdt_entry
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 06/12] qla2xxx: Add support for setting port speed
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 08/12] qla2xxx: Add workqueue to delete fcport from bsg sp->free().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 07/12] qla2xxx: Prevent SysFS access when chip is down
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 05/12] qla2xxx: Prevent multiple ADISC commands per session
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 04/12] qla2xxx: Check for FW started flag before aborting
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 03/12] qla2xxx: Fix unload when NVMe devices are configured
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 02/12] qla2xxx: Add First Burst support for FC-NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 01/12] qla2xxx: Fix LUN discovery if loop id is not assigned yet by firmware
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 00/12] qla2xxx: Misc bug fixes for the driver
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 4/4] hisi_sas: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 3/4] bfa: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 2/4] hptiop: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 1/4] lpfc: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Omar Sandoval <osandov@xxxxxxxxxxx>
• Re: Request for opinion: ufsutils
  • From: Pedro Sousa <pedrom.sousa@xxxxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: Request for opinion: ufsutils
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Request for opinion: ufsutils
  • From: Pedro Sousa <pedrom.sousa@xxxxxxxxxxxx>
• [PATCH] scsi: qlogicpti: Use of_node_name_eq for node name comparisons
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] scsi: qla2xxx: remove redundant null check on pointer sess
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 02/12] qla2xxx: Add First Burst support for FC-NVMe devices
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/4] hisi_sas: fix calls to dma_set_mask_and_coherent()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 4/4] hisi_sas: fix calls to dma_set_mask_and_coherent()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 3/4] bfa: fix calls to dma_set_mask_and_coherent()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 2/4] hptiop: fix calls to dma_set_mask_and_coherent()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 1/4] lpfc: fix calls to dma_set_mask_and_coherent()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 0/4] scsi: fixup dma_set_mask_and_coherent() calls
  • From: Hannes Reinecke <hare@xxxxxxx>
• SCSI regression in 4.19
  • From: Roger Pau Monné <roger.pau@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Clean up UFSHC driver
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] scsi: ufs: Do not disable vccq in UFSHC driver
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH 07/12] qla2xxx: Prevent SysFS access when chip is down (fwd)
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• RE: Request for opinion: ufsutils
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: sd.h: copy error in sd_first_printk() ?
  • From: Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: sd: block: Fix regressions in read-only block device handling
  • From: Hannes Reinecke <hare@xxxxxxx>
• [RESEND PATCH] libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Bob Liu <bob.liu@xxxxxxxxxx>
• [PATCH] scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: sd.h: copy error in sd_first_printk() ?
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Fix panic from use after free in qla2x00_async_tm_cmd
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] megaraid_sas: Update structures for HOST_DEVICE_LIST DCMD
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Fix error code if kcalloc() fails
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: fix a typo in comment
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 040/105] scsi: isci: initialize shost fully before calling scsi_add_host()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 039/105] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/6] scsi: hisi_sas: Add support for DIX feature for v3 hw
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 061/105] scsi: qedi: Add ep_state for login completion on un-reachable targets
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 062/105] scsi: ufs: Fix geometry descriptor size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 064/105] scsi: cxgb4i: add wait_for_completion()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 063/105] scsi: qla1280: set 64bit coherent mask
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: qla2xxx init warning with blk_mq at drivers/pci/msi.c:1273 pci_irq_get_affinity+0xf4/0x120
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v2] scsi: sd: block: Fix regressions in read-only block device handling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 33/83] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 34/83] scsi: isci: initialize shost fully before calling scsi_add_host()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 51/83] scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 52/83] scsi: ufs: Fix system suspend status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 54/83] scsi: ufs: Fix geometry descriptor size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 55/83] scsi: cxgb4i: add wait_for_completion()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 19/34] scsi: isci: initialize shost fully before calling scsi_add_host()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 18/34] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 24/34] scsi: ufs: Fix system suspend status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 25/34] scsi: qedi: Add ep_state for login completion on un-reachable targets
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 13/21] scsi: isci: initialize shost fully before calling scsi_add_host()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 10/16] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 11/16] scsi: isci: initialize shost fully before calling scsi_add_host()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 08/14] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 09/14] scsi: isci: initialize shost fully before calling scsi_add_host()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 12/21] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 53/83] scsi: qedi: Add ep_state for login completion on un-reachable targets
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 059/105] scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 060/105] scsi: ufs: Fix system suspend status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 03/12] qla2xxx: Fix unload when NVMe devices are configured
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 11/12] qla2xxx: Add new FW dump template entry types
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 12/12] qla2xxx: Update driver version to 10.00.00.14-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 09/12] qla2xxx: Move marker request behind QPair
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 10/12] qla2xxx: Fix code indentation for qla27xx_fwdt_entry
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 05/12] qla2xxx: Prevent multiple ADISC commands per session
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 08/12] qla2xxx: Add workqueue to delete fcport from bsg sp->free().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 07/12] qla2xxx: Prevent SysFS access when chip is down
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 02/12] qla2xxx: Add First Burst support for FC-NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 06/12] qla2xxx: Add support for setting port speed
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 04/12] qla2xxx: Check for FW started flag before aborting
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 00/12] qla2xxx: Misc bug fixes for the driver
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 01/12] qla2xxx: Fix LUN discovery if loop id is not assigned yet by firmware
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH RFC v2] fcoe: make use of fip_mode enum complete
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH v2] scsi: sd: Optimal I/O size should be a multiple of physical block size
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] xen-scsiback: mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: Request for opinion: ufsutils
  • From: Pedro Sousa <pedrom.sousa@xxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: fix entropy gathering for most rotational disks
  • From: Xuewei Zhang <xueweiz@xxxxxxxxxx>
• Re: [PATCH] Fix panic from use after free in qla2x00_async_tm_cmd
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] Fix panic from use after free in qla2x00_async_tm_cmd
  • From: Giridhar Malavali <gmalavali@xxxxxxxxxxx>
• Re: qla2xxx init warning with blk_mq at drivers/pci/msi.c:1273 pci_irq_get_affinity+0xf4/0x120
  • From: Meelis Roos <mroos@xxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: fix entropy gathering for most rotational disks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: MAINTAINERS: SCSI initiator and target tweaks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/5] Reduce the size of the SCSI request data structure
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi_debug: Fix a recently introduced regression
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: fix entropy gathering for most rotational disks
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [PATCH] scsi: sd: fix entropy gathering for most rotational disks
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH] scsi: lpfc: fix a handful of indentation issues
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [5.0-rc5 regression] "scsi: kill off the legacy IO path" causes 5 minute delay during boot on Sun Blade 2500
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [SOLVED] dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [5.0-rc5 regression] "scsi: kill off the legacy IO path" causes 5 minute delay during boot on Sun Blade 2500
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi_debug: Fix a recently introduced regression
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH] Fix panic from use after free in qla2x00_async_tm_cmd
  • From: Bill Kuzeja <William.Kuzeja@xxxxxxxxxxx>
• Re: [PATCH 1/1] bnx2x: Add FW 7.13.11.0.
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• RE: Request for opinion: ufsutils
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: Request for opinion: ufsutils
  • From: Pedro Sousa <pedrom.sousa@xxxxxxxxxxxx>
• Re: qla2xxx init warning with blk_mq at drivers/pci/msi.c:1273 pci_irq_get_affinity+0xf4/0x120
  • From: Meelis Roos <mroos@xxxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: Optimal I/O size should be a multiple of physical block size
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] Move the resid member from struct scsi_data_buffer into struct scsi_cmnd
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 4/5] sd: Remove superfluous residual assignments
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 3/5] uas: Use scsi_[gs]et_resid() where appropriate
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 2/5] scsi_debug: Use scsi_[gs]et_resid() where appropriate
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/5] libiscsi: Use scsi_[gs]et_resid() where appropriate
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] scsi_debug: Fix a recently introduced regression
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH RFC v2] fcoe: make use of fip_mode enum complete
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: Request for opinion: ufsutils
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• [PATCH] scsi: osd: expand minor range when registering chrdev region
  • From: Chengguang Xu <cgxu519@xxxxxxx>
• Re: [5.0-rc5 regression] "scsi: kill off the legacy IO path" causes 5 minute delay during boot on Sun Blade 2500
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• RE: [5.0-rc5 regression] "scsi: kill off the legacy IO path" causes 5 minute delay during boot on Sun Blade 2500
  • From: "Elliott, Robert (Persistent Memory)" <elliott@xxxxxxx>
• Re: [5.0-rc5 regression] "scsi: kill off the legacy IO path" causes 5 minute delay during boot on Sun Blade 2500
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH] scsi: MAINTAINERS: SCSI initiator and target tweaks
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [5.0-rc5 regression] "scsi: kill off the legacy IO path" causes 5 minute delay during boot on Sun Blade 2500
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: mptfusion: mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• RE: Request for opinion: ufsutils
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH] scsi: lpfc: Fix error code if kcalloc() fails
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Request for opinion: ufsutils
  • From: Pedro Sousa <pedrom.sousa@xxxxxxxxxxxx>
• Re: v5.0-rc6 lpfc lockdep warning
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: qla2xxx init warning with blk_mq at drivers/pci/msi.c:1273 pci_irq_get_affinity+0xf4/0x120
  • From: Giridhar Malavali <gmalavali@xxxxxxxxxxx>
• [PATCH] scsi: lpfc: Fix error code if kcalloc() fails
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH] qla2xxx: Fixup dual-protocol FCP connections
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH RFC v2] fcoe: make use of fip_mode enum complete
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v5 1/2] scsi: ufs: Do not disable vccq in UFSHC driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH RFC v2] fcoe: make use of fip_mode enum complete
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: Jeremy Cline <jeremy@xxxxxxxxxx>
• [PATCH] scsi: lpfc: fix calls to dma_set_mask_and_coherent()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH v5 2/2] scsi: ufs: Remove unused device quirks
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v5 1/2] scsi: ufs: Do not disable vccq in UFSHC driver
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v5 0/2] Clean up UFSHC driver
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] scsi: ufs: fix a typo in comment
  • From: Pedro Sousa <pedrom.sousa@xxxxxxxxxxxx>
• Re: [PATCH 1/6] scsi: hisi_sas: Add support for DIX feature for v3 hw
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH] fcoe: make use of fip_mode enum complete
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• v5.0-rc6 lpfc lockdep warning
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 3/5] uas: Use scsi_[gs]et_resid() where appropriate
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• [PATCH] scsi: ufs: fix a typo in comment
  • From: Chengguang Xu <cgxu519@xxxxxxx>
• qla2xxx init warning with blk_mq at drivers/pci/msi.c:1273 pci_irq_get_affinity+0xf4/0x120
  • From: Meelis Roos <mroos@xxxxxxxx>
• Re: [PATCH 2/5] scsi_debug: Use scsi_[gs]et_resid() where appropriate
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH] scsi: scsi_debug: Implement support for write protect
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v4 6/7] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• RE: [PATCH v4 6/7] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• [PATCH v4 7/7] arm64: dts: qcom: msm8998: Add UFS nodes
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v4 6/7] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v4 5/7] arm64: dts: qcom: msm8998: Allow drivers to set-load
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• RE: [PATCH 1/2] megaraid_sas: Update structures for HOST_DEVICE_LIST DCMD
  • From: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.0-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH] scsi: sd: Optimal I/O size should be a multiple of physical block size
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: MAINTAINERS: SCSI initiator and target tweaks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: sd: block: Handle cases where devices come online read-only
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: scsi_debug: Implement support for write protect
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/6] scsi: hisi_sas: Add support for DIX feature for v3 hw
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2] megaraid_sas: Update structures for HOST_DEVICE_LIST DCMD
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/6] hisi_sas: DIX support, performance optimisation, and misc patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: iscsi: flush running unbind operations when removing a session
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fixup dual-protocol FCP connections
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: ufs: Fix the compatible string definition
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v5] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v4 4/7] phy: qcom-qmp: Add QMP UFS PHY support for msm8998
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v4 3/7] dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v4 2/7] dt-bindings: ufs: Add msm8998 compatible string
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v4 1/7] dt-bindings: ufs: Fix the compatible string definition
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v4 0/7] UFS on APQ8098/MSM8998
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH 5/5] Move the resid member from struct scsi_data_buffer into struct scsi_cmnd
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 3/5] uas: Use scsi_[gs]et_resid() where appropriate
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 4/5] sd: Remove superfluous residual assignments
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/5] libiscsi: Use scsi_[gs]et_resid() where appropriate
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 2/5] scsi_debug: Use scsi_[gs]et_resid() where appropriate
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 0/5] Reduce the size of the SCSI request data structure
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi_debug: Fix a recently introduced regression
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [GIT PULL] SCSI fixes for 5.0-rc5
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] phy: qcom: Utilize UFS reset controller
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v5] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] megaraid_sas: Update structures for HOST_DEVICE_LIST DCMD
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [LSF/MM TOPIC] BPF for Block Devices
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• [PATCH 2/2] megaraid_sas: driver version update
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH 1/2] megaraid_sas: Update structures for HOST_DEVICE_LIST DCMD
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH 0/2] megaraid_sas: Update structures for HOST_DEVICE_LIST DCMD
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• Re: [PATCH v5] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [LSF/MM TOPIC] BPF for Block Devices
  • From: Javier González <javier@xxxxxxxxxxx>
• Re: [PATCH v5] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [LSF/MM TOPIC] BPF for Block Devices
  • From: "Stephen Bates" <sbates@xxxxxxxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• [PATCH v5] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• LSF/MM 2019: Call for Proposals (UPDATED!)
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] scsi: ufs-bsg: Allow reading descriptors
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH v4 3/3] scsi: ufs-bsg: Allow reading descriptors
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH] scsi: mpt fusion: fix indentation issues
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v4] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v3 8/8] phy: ufs-qcom: Refactor all init steps into phy_poweron
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 7/8] phy: qcom: Utilize UFS reset controller
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• RE: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [Bug 199703] HPSA blocking boot on HP smart Array P400
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: dd hangs when reading large partitions
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] dt-bindings: ufs: Fix the compatible string definition
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• RE: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/6] scsi: hisi_sas: Add support for DIX feature for v3 hw
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 2/6] scsi: hisi_sas: Add manual trigger for debugfs dump
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 5/6] scsi: hisi_sas: Use pci_irq_get_affinity() for v3 hw as experimental
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 4/6] scsi: hisi_sas: Issue internal abort on all relevant queues
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 3/6] scsi: hisi_sas: change queue depth from 512 to 4096
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 0/6] hisi_sas: DIX support, performance optimisation, and misc patches
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 6/6] scsi: hisi_sas: Do some more tidy-up
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• [Bug 199703] HPSA blocking boot on HP smart Array P400
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [LSF/MM TOPIC] : blktests: status, an expansion plan for the storage stack test framework
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH v4 00/26] lpfc updates for 12.2.0.0
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 00/13] qla2xxx: Driver updates and bug fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v3 8/8] phy: ufs-qcom: Refactor all init steps into phy_poweron
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v3 7/8] phy: qcom: Utilize UFS reset controller
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v3 0/8] phy: qcom-ufs: Enable regulators to be off in suspend
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v4] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: "Grove, Bradley" <bgrove@xxxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v2 6/9] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] tcmu: wait for nl reply only if there are listeners
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: remove exofs, the T10 OSD code and block/scsi bidi support V4
  • From: Christoph Hellwig <hch@xxxxxx>
• [LSF/MM TOPIC] Handling of managed IRQs when hotplugging CPUs
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Hannes Reinecke <hare@xxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH for-next] scsi: ufs: Update dwc driver maintainer to Pedro Sousa
  • From: Joao Pinto <joao.pinto@xxxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH v4 3/3] scsi: ufs-bsg: Allow reading descriptors
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH v2 5/5] block: check_events: don't bother with events if unsupported
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH v2 3/5] Revert "ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd"
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH v2 4/5] Revert "block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers"
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH v2 1/5] block: genhd: remove async_events field
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH v2 2/5] block: disk_events: introduce event flags
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH v2 0/5] block: skip media change event handling if unsupported
  • From: Martin Wilck <mwilck@xxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• sd.h: copy error in sd_first_printk() ?
  • From: Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 08/13] qla2xxx: Fix SRB allocation flag to avoid sleeping in IRQ context
  • From: Giridhar Malavali <gmalavali@xxxxxxxxxxx>
• Re: remove exofs, the T10 OSD code and block/scsi bidi support V4
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/4] mpt3sas: Add Atlas and Ambrosia device support.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add reviewers for UFS patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V3 0/3] megaraid_sas: Add support for FW device list DCMD
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH for-next] scsi: ufs: Update dwc driver maintainer to Pedro Sousa
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: cxlflash: Prevent deadlock when adapter probe fails
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: aacraid: clean up some indentation and formatting issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Revert "scsi: libfc: Add WARN_ON() when deleting rports"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: Improve sd_print_capacity()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd_zbc: Fix zone information messages
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 1/1] scsi: ufs: Print uic error history in time order
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 08/13] qla2xxx: Fix SRB allocation flag to avoid sleeping in IRQ context
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] RDMA/srp: Rework SCSI device reset handling
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: remove exofs, the T10 OSD code and block/scsi bidi support V4
  • From: Boaz Harrosh <ooo@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• Re: [PATCH 08/13] qla2xxx: Fix SRB allocation flag to avoid sleeping in IRQ context
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• RE: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add reviewers for UFS patches
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH v3] MAINTAINERS: Add reviewers for UFS patches
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add reviewers for UFS patches
  • From: Joao Pinto <joao.pinto@xxxxxxxxxxxx>
• [PATCH v3] MAINTAINERS: Add reviewers for UFS patches
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• RE: [PATCH] scsi: aacraid: clean up some indentation and formatting issues
  • From: <Mahesh.Rajashekhara@xxxxxxxxxxxxx>
• Re: [PATCH 7/8] block: remove req->special
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] Revert "scsi: libfc: Add WARN_ON() when deleting rports"
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: Userspace regression with 6baca7601bde ("scsi: target: drop unused pi_prot_format attribute storage")
  • From: Laura Abbott <labbott@xxxxxxxxxx>
• Re: Userspace regression with 6baca7601bde ("scsi: target: drop unused pi_prot_format attribute storage")
  • From: David Disseldorp <ddiss@xxxxxxx>
• RE: [PATCH v1 1/1] scsi: ufs: Print uic error history in time order
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Userspace regression with 6baca7601bde ("scsi: target: drop unused pi_prot_format attribute storage")
  • From: Laura Abbott <labbott@xxxxxxxxxx>
• Re: [PATCH] scsi: sd_zbc: Fix zone information messages
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: Stall with RAID10 + XFS + mpt3sas
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.0-rc4
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH] scsi: aacraid: clean up some indentation and formatting issues
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] scsi: mvsas: clean up a few indentation issues
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] tcmu: wait for nl reply only if there are listeners
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH] scsi: aic94xx: fix module loading
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.0-rc4
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: csiostor: Remove set but not used variable 'pln'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Add new FC-NVMe enable BIT to enable FC-NVMe feature
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [Bug 202425] 3w-9xxx: 3ware 9650SE-2LP RAID controller not working on AMD Ryzen system
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: mpt3sas and T10DIF
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: aic94xx: fix module loading
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/9] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: Recent removal of bsg read/write support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: mpt3sas and T10DIF
  • From: Douglas Miller <dougmill@xxxxxxxxxxxxxxxxxx>
• Re: mpt3sas and T10DIF
  • From: John Garry <john.garry@xxxxxxxxxx>
• mpt3sas and T10DIF
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Stall with RAID10 + XFS + mpt3sas
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: remove exofs, the T10 OSD code and block/scsi bidi support V4
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 1/4] block: disk_events: introduce event flags
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH] Revert "scsi: libfc: Add WARN_ON() when deleting rports"
  • From: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Add new FC-NVMe enable BIT to enable FC-NVMe feature
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 7/7] scsi: libsas: fix issue of swapping two sas disks
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 6/8] scsi: stop setting up request->special
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 5/8] scsi: remove bidirectional command support
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 3/8] fs: remove exofs
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 1/8] bsg: refactor bsg_ioctl
  • From: Christoph Hellwig <hch@xxxxxx>
• remove exofs, the T10 OSD code and block/scsi bidi support V4
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 8/8] block: remove bidi support
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 7/8] block: remove req->special
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 4/8] scsi: remove the SCSI OSD library
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 2/8] bsg-lib: handle bidi requests without block layer help
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] sd: Protect against submitting READ(6) or WRITE(6) with 256 logical blocks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 7/7] scsi: libsas: fix issue of swapping two sas disks
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 7/7] scsi: libsas: fix issue of swapping two sas disks
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: aic94xx: fix module loading
  • From: Emil Velikov <emil.l.velikov@xxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] [PATCH v4 3/3] scsi: ufs-bsg: Allow reading descriptors
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH v2 3/7] scsi: libsas: optimize the debug print of the revalidate process
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] [PATCH v4 2/3] scsi: ufs: Allow reading descriptor via raw upiu
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH v2 6/7] scsi: libsas: reset the phy address if discover failed
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 1/7] scsi: libsas: reset the negotiated_linkrate when phy is down
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: 李春 <pickup112@xxxxxxxxx>
• Re: mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: Xiao Ni <xni@xxxxxxxxxx>
• [Bug 202425] 3w-9xxx: 3ware 9650SE-2LP RAID controller not working on AMD Ryzen system
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202425] 3w-9xxx: 3ware 9650SE-2LP RAID controller not working on AMD Ryzen system
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 7/7] scsi: libsas: fix issue of swapping two sas disks
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 6/7] scsi: libsas: reset the phy address if discover failed
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 3/7] scsi: libsas: optimize the debug print of the revalidate process
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 2/7] scsi: libsas: only clear phy->in_shutdown after shutdown event done
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 1/7] scsi: libsas: reset the negotiated_linkrate when phy is down
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH] scsi: aic94xx: fix module loading
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] RDMA/srp: Rework SCSI device reset handling
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH for-next] scsi: ufs: Update dwc driver maintainer to Pedro Sousa
  • From: Joao Pinto <joao.pinto@xxxxxxxxxxxx>
• Re: [PATCH] RDMA/srp: Increase max_segment_size
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 7/7] scsi: libsas: fix issue of swapping two sas disks
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH for-next] scsi: ufs: Update dwc driver maintainer to Pedro Sousa
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] qla2xxx: Add new FC-NVMe enable BIT to enable FC-NVMe feature
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH for-next] scsi: ufs: Update dwc driver maintainer to Pedro Sousa
  • From: Joao Pinto <joao.pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 6/7] scsi: libsas: reset the phy address if discover failed
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 3/7] scsi: libsas: optimize the debug print of the revalidate process
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 2/7] scsi: libsas: only clear phy->in_shutdown after shutdown event done
  • From: John Garry <john.garry@xxxxxxxxxx>
• [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v4 1/3] scsi: ufs-bsg: Change the calling convention for write descriptor
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: 李春 <pickup112@xxxxxxxxx>
• Re: mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: 李春 <pickup112@xxxxxxxxx>
• [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v2 1/7] scsi: libsas: reset the negotiated_linkrate when phy is down
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] scsi: cxlflash: Prevent deadlock when adapter probe fails
  • From: Vaibhav Jain <vaibhav@xxxxxxxxxxxxx>
• Re: [PATCH v4 21/26] lpfc: Rework locking on SCSI io completion
  • From: Hannes Reinecke <hare@xxxxxxx>
• [Bug 201609] sysfs duplicate filename on driver loading Adaptec AIC-9410W
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH v1 1/1] scsi: ufs: Print uic error history in time order
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH -next] scsi: libfc: Fix potential NULL pointer dereference
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: Xiao Ni <xni@xxxxxxxxxx>
• [PATCH v2 7/7] scsi: libsas: fix issue of swapping two sas disks
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 1/7] scsi: libsas: reset the negotiated_linkrate when phy is down
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 3/7] scsi: libsas: optimize the debug print of the revalidate process
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 5/7] scsi: libsas: check if the same device when flutter
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 4/7] scsi: libsas: split the replacement of sas disks in two steps
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 6/7] scsi: libsas: reset the phy address if discover failed
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 2/7] scsi: libsas: only clear phy->in_shutdown after shutdown event done
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH v2 0/7] libsas: fix issue of swapping or replacing disks
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: Jack Wang <xjtuwjp@xxxxxxxxx>
• [PATCH] scsi: sd: Improve sd_print_capacity()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH] scsi: sd_zbc: Fix zone information messages
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• mdadm's raid1 will not eliminate abnormal disk after 5 seconds under IO pressure
  • From: 李春 <pickup112@xxxxxxxxx>
• Re: fsync hangs after scsi rejected a request
  • From: Florian Stecker <mail@xxxxxxxxxxxxxxxxx>
• Re: fsync hangs after scsi rejected a request
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: fsync hangs after scsi rejected a request
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 08/13] qla2xxx: Fix SRB allocation flag to avoid sleeping in IRQ context
  • From: Giridhar Malavali <gmalavali@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: csiostor: Remove set but not used variable 'pln'
  • From: Varun Prakash <varun@xxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] sd: Protect against submitting READ(6) or WRITE(6) with 256 logical blocks
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 0/4] mpt3sas: Add Atlas and Ambrosia device support.
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 3/4] mpt3sas: Add support for ATLAS PCIe switch.
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 2/4] mpt3sas: Add support for NVMe Switch Adapter
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 1/4] mpt3sas: Rename mpi endpoint device ID macro.
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 4/4] mpt3sas: Update driver version to 27.102.00.00
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: Question on handling managed IRQs when hotplugging CPUs
  • From: Hannes Reinecke <hare@xxxxxxxx>
• [PATCH V3 3/3] megaraid_sas: Add support for DEVICE_LIST DCMD in driver
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH V3 2/3] megaraid_sas: Rework device add code in AEN path
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH V3 1/3] megaraid_sas: Rework code to get PD and LD list
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH V3 0/3] megaraid_sas: Add support for FW device list DCMD
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• Re: [PATCH v2 7/7] Move the resid member from struct scsi_data_buffer into struct scsi_cmnd
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 2/7] Change scsi_cmnd.prot_sdb from a pointer into a regular member
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 1/7] Introduce the bidi_supported flag in the host template structure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [LSF/MM TOPIC] Zoned Block Devices
  • From: Javier González <javier@xxxxxxxxxxx>
• Re: [PATCH] sd: Protect against submitting READ(6) or WRITE(6) with 256 logical blocks
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [LSF/MM TOPIC] blk-mq private tags for SCSI
  • From: Hannes Reinecke <hare@xxxxxxx>
• RE: [PATCH v1 1/1] scsi: ufs: Print uic error history in time order
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 00/13] hisi_sas: Misc fixes and other more minor patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: 53c700: pass correct "dev" to dma_alloc_attrs()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: bnx2fc: Fix error handling in probe()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: nsp32: Remove unnecessary self assignment in nsp32_set_sync_entry
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] pcmcia: Remove unnecessary parentheses
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi_debug: fix write_same with virtual_gb problem
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] scsi: trivial header search path fixups
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] libfc free skb when receiving invalid flogi resp
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: fnic: Remove set but not used variable 'vdev'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] zfcp: fix sysfs block queue limit output for max_segment_size
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] sd: Protect against submitting READ(6) or WRITE(6) with 256 logical blocks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] libsas: Remove scsi_to_u32()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: hpsa: clean up two indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/7] SCSI: cleanup debugfs usage
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Move FCoE to Hannes Reinecke
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] SCSI: fcoe: remove unneeded fcoe_ctlr_destroy_store export
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] SCSI: fcoe: convert to use BUS_ATTR_WO
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] block: set rq->cmd_flags with bio->opf instead of data->cmd_flags when bio is not Null
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• [patch-next] scsi: pmcraid: use dma_pool_zalloc
  • From: Christopher Diaz Riveros <chrisadr@xxxxxxxxxx>
• [PATCH v4 13/26] lpfc: Allow override of hardware queue selection policies
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 11/26] lpfc: Synchronize hardware queues with SCSI MQ interface
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 05/26] lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 10/26] lpfc: Convert ring number to hardware queue for nvme wqe posting.
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 18/26] lpfc: Utilize new IRQ API when allocating MSI-X vectors
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 19/26] lpfc: Resize cpu maps structures based on possible cpus
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 17/26] lpfc: Rework EQ/CQ processing to address interrupt coalescing
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 20/26] lpfc: Enable SCSI and NVME fc4s by default
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 25/26] lpfc: Update 12.2.0.0 file copyrights to 2019
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 26/26] lpfc: Update lpfc version to 12.2.0.0
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 21/26] lpfc: Rework locking on SCSI io completion
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 22/26] lpfc: Fix default driver parameter collision for allowing NPIV support
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 24/26] lpfc: Fix nvmet issues when link bounce under IO load
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 23/26] lpfc: Correct upcalling nvmet_fc transport during io done downcall
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 15/26] lpfc: Support non-uniform allocation of MSIX vectors to hardware queues
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 06/26] lpfc: Partition XRI buffer list across Hardware Queues
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 16/26] lpfc: cleanup: convert eq_delay to usdelay
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 12/26] lpfc: Adapt partitioned XRI lists to efficient sharing
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 14/26] lpfc: Fix setting affinity hints to correlate with hardware queues
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 09/26] lpfc: Move SCSI and NVME Stats to hardware queue structures
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 08/26] lpfc: Adapt cpucheck debugfs logic to Hardware Queues
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 07/26] lpfc: cleanup: Remove unused FCP_XRI_ABORT_EVENT slowpath event
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 03/26] lpfc: Implement common IO buffers between NVME and SCSI
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 00/26] lpfc updates for 12.2.0.0
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 04/26] lpfc: Remove extra vector and SLI4 queue for Expresslane
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 02/26] lpfc: cleanup: Remove excess check on NVME io submit code path
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v4 01/26] lpfc: cleanup: remove nrport from nvme command structure
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v3 21/26] lpfc: Rework locking on SCSI io completion
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v3 11/26] lpfc: Synchronize hardware queues with SCSI MQ interface
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v4 3/3] scsi: ufs-bsg: Allow reading descriptors
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [LSF/MM TOPIC] Zoned Block Devices
  • From: Matias Bjorling <Matias.Bjorling@xxxxxxx>
• [PATCH AUTOSEL 4.20 019/304] scsi: lpfc: Correct LCB RJT handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 020/304] scsi: mpt3sas: Call sas_remove_host before removing the target devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 050/304] scsi: hisi_sas: change the time of SAS SSP connection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 061/304] scsi: cxgb4i: fix thermal configuration dependencies
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 021/304] scsi: lpfc: Fix LOGO/PLOGI handling when triggerd by ABTS Timeout event
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 228/304] scsi: smartpqi: increase fw status register read timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 227/304] scsi: smartpqi: correct volume status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 226/304] scsi: smartpqi: correct host serial num for ssa
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] block: set rq->cmd_flags with bio->opf instead of data->cmd_flags when bio is not Null
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 016/258] scsi: mpt3sas: Call sas_remove_host before removing the target devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 017/258] scsi: lpfc: Fix LOGO/PLOGI handling when triggerd by ABTS Timeout event
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 043/258] scsi: hisi_sas: change the time of SAS SSP connection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 015/258] scsi: lpfc: Correct LCB RJT handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 190/258] scsi: smartpqi: correct host serial num for ssa
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 008/170] scsi: lpfc: Correct LCB RJT handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 009/170] scsi: mpt3sas: Call sas_remove_host before removing the target devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 192/258] scsi: smartpqi: increase fw status register read timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 191/258] scsi: smartpqi: correct volume status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• RE: [PATCH] scsi: hpsa: clean up two indentation issues
  • From: <Don.Brace@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 069/107] scsi: smartpqi: correct volume status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 068/107] scsi: smartpqi: correct host serial num for ssa
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 120/170] scsi: smartpqi: increase fw status register read timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 119/170] scsi: smartpqi: correct volume status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 118/170] scsi: smartpqi: correct host serial num for ssa
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [PATCH v4] scsi/ata: Use unsigned int for cmd's type in ioctls in scsi_host_template
  • From: <Don.Brace@xxxxxxxxxxxxx>
• Re: [LSF/MM TOPIC] blk-mq private tags for SCSI
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 05/80] scsi: lpfc: Correct LCB RJT handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 006/107] scsi: lpfc: Correct LCB RJT handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 010/170] scsi: lpfc: Fix LOGO/PLOGI handling when triggerd by ABTS Timeout event
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] block: set rq->cmd_flags with bio->opf instead of data->cmd_flags when bio is not Null
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] block: set rq->cmd_flags with bio->opf instead of data->cmd_flags when bio is not Null
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [<PATCH v1> 1/1] scsi: qcom-ufs: Add support for bus voting using ICB framework
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [LSF/MM TOPIC] Zoned Block Devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [LSF/MM TOPIC] blk-mq private tags for SCSI
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] scsi: iscsi: flush running unbind operations when removing a session
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• Re: [LSF/MM TOPIC] blk-mq private tags for SCSI
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [LSF/MM TOPIC] blk-mq private tags for SCSI
  • From: Hannes Reinecke <hare@xxxxxxx>