[PATCH V3 6/6] SCSI: don't hold device refcount in IO path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



scsi_device's refcount is always grabbed in IO path.

Turns out it isn't necessary, because blk_queue_cleanup() will
drain any in-flight IOs, then cancel timeout/requeue work, and
SCSI's requeue_work is canceled too in __scsi_remove_device().

Also scsi_device won't go away until blk_cleanup_queue() is done.

So don't hold the refcount in IO path, especially the refcount isn't
required in IO path since blk_queue_enter() / blk_queue_exit()
is introduced in the legacy block layer.

Cc: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
Cc: James Smart <james.smart@xxxxxxxxxxxx>
Cc: Bart Van Assche <bart.vanassche@xxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx,
Cc: Martin K . Petersen <martin.petersen@xxxxxxxxxx>,
Cc: Christoph Hellwig <hch@xxxxxx>,
Cc: James E . J . Bottomley <jejb@xxxxxxxxxxxxxxxxxx>,
Cc: jianchao wang <jianchao.w.wang@xxxxxxxxxx>
Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
---
 drivers/scsi/scsi_lib.c | 30 ++++++------------------------
 1 file changed, 6 insertions(+), 24 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 601b9f1de267..6772d2ae1357 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -141,8 +141,6 @@ scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
 
 static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
 {
-	struct scsi_device *sdev = cmd->device;
-
 	if (cmd->request->rq_flags & RQF_DONTPREP) {
 		cmd->request->rq_flags &= ~RQF_DONTPREP;
 		scsi_mq_uninit_cmd(cmd);
@@ -150,7 +148,6 @@ static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
 		WARN_ON_ONCE(true);
 	}
 	blk_mq_requeue_request(cmd->request, true);
-	put_device(&sdev->sdev_gendev);
 }
 
 /**
@@ -190,18 +187,12 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
 	cmd->result = 0;
 
 	/*
-	 * Before a SCSI command is dispatched,
-	 * get_device(&sdev->sdev_gendev) is called and the host,
-	 * target and device busy counters are increased. Since
-	 * requeuing a request causes these actions to be repeated and
-	 * since scsi_device_unbusy() has already been called,
-	 * put_device(&device->sdev_gendev) must still be called. Call
-	 * put_device() after blk_mq_requeue_request() to avoid that
-	 * removal of the SCSI device can start before requeueing has
-	 * happened.
+	 * Before a SCSI command is dispatched, the host, target and
+	 * device busy counters are increased. Since requeuing a request
+	 * causes these actions to be repeated and since scsi_device_unbusy()
+	 * has already been called.
 	 */
 	blk_mq_requeue_request(cmd->request, true);
-	put_device(&device->sdev_gendev);
 }
 
 /*
@@ -619,7 +610,6 @@ static bool scsi_end_request(struct request *req, blk_status_t error,
 		blk_mq_run_hw_queues(q, true);
 
 	percpu_ref_put(&q->q_usage_counter);
-	put_device(&sdev->sdev_gendev);
 	return false;
 }
 
@@ -1613,7 +1603,6 @@ static void scsi_mq_put_budget(struct blk_mq_hw_ctx *hctx)
 	struct scsi_device *sdev = q->queuedata;
 
 	atomic_dec(&sdev->device_busy);
-	put_device(&sdev->sdev_gendev);
 }
 
 static bool scsi_mq_get_budget(struct blk_mq_hw_ctx *hctx)
@@ -1621,16 +1610,9 @@ static bool scsi_mq_get_budget(struct blk_mq_hw_ctx *hctx)
 	struct request_queue *q = hctx->queue;
 	struct scsi_device *sdev = q->queuedata;
 
-	if (!get_device(&sdev->sdev_gendev))
-		goto out;
-	if (!scsi_dev_queue_ready(q, sdev))
-		goto out_put_device;
-
-	return true;
+	if (scsi_dev_queue_ready(q, sdev))
+		return true;
 
-out_put_device:
-	put_device(&sdev->sdev_gendev);
-out:
 	if (atomic_read(&sdev->device_busy) == 0 && !scsi_device_blocked(sdev))
 		blk_mq_delay_run_hw_queue(hctx, SCSI_QUEUE_DELAY);
 	return false;
-- 
2.9.5




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux