Linux SCSI

• Thread Index

• [PATCH v3 2/4] scsi: ufs: Add fatal and auto-hibern8 error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH V2 1/3] pm80xx : Fixed kernel panic during error recovery for SATA drive.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• [PATCH v1] scsi: scsi_debug: Use for_each_set_bit to simplify code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] aacraid: Host adapter Adaptec 6405 constantly resets under high io load
  • From: Konstantin Khorenko <khorenko@xxxxxxxxxxxxx>
• [PATCH v2 1/2] Revert "scsi: aacraid: Remove reference to Series-9"
  • From: Konstantin Khorenko <khorenko@xxxxxxxxxxxxx>
• [PATCH v2 2/2] scsi: aacraid: Remove references to Series-9 (only)
  • From: Konstantin Khorenko <khorenko@xxxxxxxxxxxxx>
• RE: [PATCH v2 4/4] scsi: ufs: Add history of fatal events
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: aacraid: resurrect correct arc ctrl checks for Series-6
  • From: Konstantin Khorenko <khorenko@xxxxxxxxxxxxx>
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH v2 4/4] scsi: ufs: Add history of fatal events
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH] Check sk before sendpage
  • From: Yang Bin <yang.bin18@xxxxxxxxxx>
• [PATCH v2 3/4] scsi: ufs: Do not reset error history during host reset
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 4/4] scsi: ufs: Add history of fatal events
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 2/4] scsi: ufs: Add fatal and auto-hibern8 error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 0/4] scsi: ufs: Provide fatal and auto-hibern8 error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 1/4] scsi: ufs: Change names related to error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [Bug 204119] scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [GIT PULL] SCSI topic updates for the 5.2+ merge window: sg
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [Bug 204119] New: scsi_mod: Could not allocate 4104 bytes percpu data
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [GIT PULL] first round of SCSI updates for the 5.2+ merge window
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.2+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.2+ merge window
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [GIT PULL] first round of SCSI updates for the 5.2+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: use scmd_printk() to print which command timed out
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH V2 3/3] pm80xx : Modified the logic to collect IOP event logs.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 2/3] pm80xx : Event log size through sysfs.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 1/3] pm80xx : Fixed kernel panic during error recovery for SATA drive.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 0/3] pm0xx : Updates for driver version 0.1.39.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH 00/11] kbuild: create *.mod with directory path and remove MODVERDIR
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 04/11] scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: kill useless scsi_use_blk_mq and force_blk_mq
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH] scsi: libsas: remove the exporting of sas_wait_eh
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH v2 2/3] scsi: ufs: Allow resetting the UFS device
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH V4 9/9] xen/blkback: use helper in vbd_sz()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 8/9] target/pscsi: use helper in pscsi_get_blocks()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 7/9] blktrace: use helper in blk_trace_setup_lba()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 6/9] f2fs: use helper in init_blkz_info()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 5/9] bcache: update cached_dev_init() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 4/9] blk-zoned: update blkdev_reset_zones() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 3/9] blk-zoned: update blkdev_report_zone() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 2/9] blk-zoned: update blkdev_nr_zones() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 1/9] block: add a helper function to read nr_setcs
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V4 0/9] block: use right accessor to read nr_sects
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH] scsi: libsas: remove the exporting of sas_wait_eh
  • From: Denis Efremov <efremov@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: Remove unreachable code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 2/2] virtio_scsi: implement request batching
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH 1/3] pm80xx : Fixed kernel panic during error recovery for SATA drive.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• RE: [PATCH v1 0/3] scsi: ufs: Provide fatal and auto-hibern8 error history
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v1 2/3] scsi: ufs: Add fatal and auto-hibern8 error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 0/3] scsi: ufs: Provide fatal and auto-hibern8 error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 3/3] scsi: ufs: Do not reset error history during host reset
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 1/3] scsi: ufs: Change names related to error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH V6 0/4] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: aacraid: resurrect correct arc ctrl checks for Series-6
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: aacraid: resurrect correct arc ctrl checks for Series-6
  • From: "Andrey Jr. Melnikov" <temnota.am@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [PATCH 1/1] fio: add sgv4 engine
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.2-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [GIT PULL] SCSI fixes for 5.2-rc7
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 3/3][V3] iio: Handle enumerated properties with gaps
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH 2/2] virtio_scsi: implement request batching
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] scsi: bnx2fc: remove redundant assignment to variable rc
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• RE: [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: Arthur Simchaev <Arthur.Simchaev@xxxxxxx>
• [PATCH] scsi: message: fusion: remove redundant assignment to variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• RE: [EXT] RE: [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: Pedro Sousa <PedroM.Sousa@xxxxxxxxxxxx>
• [PATCH] scsi: Remove unreachable code
  • From: Ding Xiang <dingxiang@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: megaraid_sas: Make some symbols static
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH] scsi: fdomain: Fix PCMCIA_FDOMAIN Kconfig warning
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• RE: [PATCH] scsi: uapi: ufs: Fix SPDX license identifier
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: KASAN: use-after-free Read in hci_cmd_timeout
  • From: syzbot <syzbot+19a9f729f05272857487@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 24/35] scsi/qla4xxx: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH v2 23/35] scsi: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH v2 22/35] scsi/aic7xxx: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH v2 14/35] message/fusion: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/9] block: add a helper function to read nr_setcs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] scsi: target/iblock: Fix overrun in WRITE SAME emulation
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• [PATCH 20/30] scsi: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 13/30] message/fusion: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH V3 4/9] blk-zoned: update blkdev_reset_zones() with helper
  • From: Minwoo Im <minwoo.im.dev@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: [RESEND PATCH] scsi: target/iblock: Fix overrun in WRITE SAME emulation
  • From: Michael Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH V3 4/9] blk-zoned: update blkdev_reset_zones() with helper
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 3/3] zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [RESEND PATCH] scsi: target/iblock: Fix overrun in WRITE SAME emulation
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [Bug 197877] arcmsr fails to initialize Areca ARC-1110/ARC-1120 on some systems
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• [PATCH 2/3] zfcp: fix request object use-after-free in send path causing wrong traces
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [PATCH 1/3] zfcp: fix request object use-after-free in send path causing seqno errors
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH V3 4/9] blk-zoned: update blkdev_reset_zones() with helper
  • From: Minwoo Im <minwoo.im.dev@xxxxxxxxx>
• [PATCH 0/3] zfcp: fixes for the zFCP device driver
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH V3 3/9] blk-zoned: update blkdev_report_zone() with helper
  • From: Minwoo Im <minwoo.im.dev@xxxxxxxxx>
• Re: [PATCH V3 2/9] blk-zoned: update blkdev_nr_zones() with helper
  • From: Minwoo Im <minwoo.im.dev@xxxxxxxxx>
• Re: [PATCH V3 1/9] block: add a helper function to read nr_setcs
  • From: Minwoo Im <minwoo.im.dev@xxxxxxxxx>
• [RESEND PATCH] scsi: target/iblock: Fix overrun in WRITE SAME emulation
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• [COMPILE TEST ONLY PATCH V3 9/9] xen/blkback: use helper in vbd_sz()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [COMPILE TEST ONLY PATCH V3 8/9] target/pscsi: use helper in pscsi_get_blocks()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 7/9] blktrace: use helper in blk_trace_setup_lba()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 6/9] f2fs: use helper in init_blkz_info()
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 5/9] bcache: update cached_dev_init() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 4/9] blk-zoned: update blkdev_reset_zones() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 3/9] blk-zoned: update blkdev_report_zone() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 2/9] blk-zoned: update blkdev_nr_zones() with helper
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 1/9] block: add a helper function to read nr_setcs
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• [PATCH V3 0/9] block: use right accessor to read nr_sects
  • From: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
• Re: [PATCH] scsi: target/iblock: Fix overrun in WRITE SAME emulation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH -next] scsi: bfa: Make two functions static
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next] scsi: megaraid_sas: Make some symbols static
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• [PATCH] scsi: use scmd_printk() to print which command timed out
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [PATCH] scsi: libfc: fix null pointer dereference on a null lport
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] scsi: target/iblock: Fix overrun in WRITE SAME emulation
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• Re: [PATCH] scsi: virtio_scsi: Use struct_size() helper
  • From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
• Re: [PATCH V6 4/4] block: Limit zone array allocation size
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V6 3/4] sd_zbc: Fix report zones buffer allocation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V6 2/4] block: Kill gfp_t argument of blkdev_report_zones()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V6 1/4] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH V6 4/4] block: Limit zone array allocation size
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V6 3/4] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V6 1/4] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V6 2/4] block: Kill gfp_t argument of blkdev_report_zones()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V6 0/4] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH 4/4] ipvs: reduce kernel stack usage
  • From: Julian Anastasov <ja@xxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.2-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH 1/4] megaraid_sas: Fix calculation of target ID
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.2-rc6
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] staging: rtl8712: reduce stack usage, again
  • From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
• Re: [PATCH 4/4] ipvs: reduce kernel stack usage
  • From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
• Re: [PATCH 2/4] lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [PATCH 1/4] [v2] structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 37/39] docs: adds some directories to the main documentation index
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH 4/4] ipvs: reduce kernel stack usage
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 3/4] staging: rtl8712: reduce stack usage, again
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/4] lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/4] [v2] structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 37/39] docs: adds some directories to the main documentation index
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 05/43] docs: powerpc: convert docs to ReST and rename to *.rst
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• RE: [PATCH] scsi: uapi: ufs: Fix SPDX license identifier
  • From: Pedro Sousa <PedroM.Sousa@xxxxxxxxxxxx>
• [PATCH 4/4] megaraid_sas: Update driver version to 07.710.50.00
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH 3/4] megaraid_sas: Add module parameter for FW Async event logging
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH 2/4] megaraid_sas: Enable msix_load_balance for Invader and later controllers
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• [PATCH 0/4] megaraid_sas: driver updates
  • From: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
• Re: [PATCH 58/87] scsi: mvsas: remove memset after dma_alloc_coherent
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH V5 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V5 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V5 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V5 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [ANNOUNCE] Alpine Linux Persistence and Storage Summit
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v2 18/27] scsi: use zeroing allocator rather than allocator followed by memset 0
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH v2 17/27] scsi: remove unneeded memset
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH v2 13/27] message: fusion: remove memset after pci_alloc_consistent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• Re: [PATCH V5 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 71/87] scsi: 3w-xxxx: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 70/87] scsi: aacraid: remove memset after dma_alloc_coherent in rx.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 69/87] scsi: arcmsr: remove memset after dma_coherent in arcmsr_hba.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 68/87] scsi: be2iscsi: remove memset after dma_alloc_coherent in be_iscsi.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 67/87] scsi: bfa: remove memset after dma_alloc_coherent in bfad.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 66/87] scsi: bnx2fc: remove memset after dma_alloc_coherent in bnx2fc_io.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 65/87] scsi: dpt_i2o.c: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 64/87] scsi: esas2r: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 63/87] scsi: ips.c: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 62/87] scsi: lpfc: replace kmalloc and memset with kzalloc
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 61/87] scsi: lpfc: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 60/87] scsi: megaraid: remove memset after kcalloc
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 59/87] scsi: mpt3sas: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 58/87] scsi: mvsas: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 56/87] scsi: pmcraid: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 55/87] scsi: qedf: replace vmalloc and memset with vzalloc
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 54/87] scsi: qla2xxx: replace vmalloc and memset with vzalloc
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 53/87] scsi: qla4xxx: remove memset after dma_alloc_coherent
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 52/87] scsi: qlogicpti: remove memset after dma_alloc_coherent in qlogicpti.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 34/87] message: fusion: remove memset after pci_alloc_consistent in mptbase.c
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• Re: [PATCH V5 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH V5 3/3] block: Limit zone array allocation size
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• [PATCH 0/1] aacraid: Host adapter Adaptec 6405 constantly resets under high io load
  • From: Konstantin Khorenko <khorenko@xxxxxxxxxxxxx>
• [PATCH 1/1] scsi: aacraid: resurrect correct arc ctrl checks for Series-6
  • From: Konstantin Khorenko <khorenko@xxxxxxxxxxxxx>
• Re: [PATCH V5 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V5 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH V5 3/3] block: Limit zone array allocation size
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V5 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V5 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V5 0/3] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [RESEND RFC PATCH] mpt3sas: support target smid for [abort|query] task
  • From: Minwoo Im <minwoo.im@xxxxxxxxxxx>
• Re: [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] scsi: uapi: ufs: Fix SPDX license identifier
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 1/1] qla2xxx: move IO flush to the front of NVME rport unregistration
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/3] qla2xxx: Fix crashes with FC-NVMe devices
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/3] pm0xx : Updates for driver version 0.1.39.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 00/18] megaraid_sas: driver updates to 07.710.06.00-rc1
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/4] mpt3sas: bug fix patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH V4 3/3] block: Limit zone array allocation size
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V4 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V4 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V4 0/3] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v2 0/2] Fix struct bnx2fc_cmd refcount imbalance in several functions
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/6] bnx2fc: Update to the driver.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufshdc-pci: Add Intel PCI Ids for EHL
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/3] scsi: ufs: typo fixes and improvement
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 56/60] scsi: qedi: Check targetname while finding boot target information
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 88/95] scsi: qedi: Check targetname while finding boot target information
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 2/3] qla2xxx: on session delete return nvme cmd
  • From: Arun Easi <aeasi@xxxxxxxxxxx>
• Re: [PATCH] scsi: convert to rst for documenation
  • From: Phong Tran <tranmanphong@xxxxxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH] scsi: mpt3sas: clean up a sizeof()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] scsi: mpt3sas: clean up a sizeof()
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 0/2] scsi: add support for request batching
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH V3 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] scsi: mpt3sas: clean up a sizeof()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 3/3] pm80xx : Modified the logic to collect IOP event logs.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Steffen Maier <maier@xxxxxxxxxxxxx>
• [PATCH V3 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V3 3/3] block: Limit zone array allocation size
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V3 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V3 0/3] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v2 2/3] qla2xxx: on session delete return nvme cmd
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH V2 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V2 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH v3 1/3] scsi: ufs: Introduce vops for resetting device
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 21/34] scsi: hpsa: correct ioaccel2 chaining
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 15/21] scsi: hpsa: correct ioaccel2 chaining
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 09/11] scsi: hpsa: correct ioaccel2 chaining
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 6/6] scsi: hpsa: correct ioaccel2 chaining
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 34/51] scsi: hpsa: correct ioaccel2 chaining
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• scsi_dh_alua: re-initialize pg->interval in alua_rtpg_work
  • From: Zhangguanghui <zhang.guanghui@xxxxxxx>
• [PATCH V2 3/3] block: Limit zone array allocation size
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V2 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V2 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH V2 0/3] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v4 5/7] lib/hexdump.c: Allow multiple groups to be separated by lines '|'
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v4 0/7] Hexdump Enhancements
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH] scsi: convert to rst for documenation
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] scsi: convert to rst for documenation
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v4 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Javier González <javier@xxxxxxxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 3/3] block: Limit zone array allocation size
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: Arthur Simchaev <Arthur.Simchaev@xxxxxxx>
• Re: [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH 2/4] null_blk: add zone open, close, and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] scsi: ufs: Introduce vops for resetting device
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH 2/4] null_blk: add zone open, close, and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH] Documentation: scsi: ufs: announce ufs-tool v1.0
  • From: Arthur Simchaev <Arthur.Simchaev@xxxxxxx>
• Re: [PATCH 2/4] null_blk: add zone open, close, and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• [PATCH v3 18/18] megaraid_sas: Update driver version to 07.710.06.00-rc1
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 17/18] megaraid_sas: Introduce various Aero performance modes
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 16/18] megaraid_sas: Use high IOPs queues based on IO workload
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 15/18] megaraid_sas: Set affinity for high IOPs reply queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 14/18] megaraid_sas: Enable coalescing for high IOPs queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 13/18] megaraid_sas: Add support for High IOPs queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 12/18] megaraid_sas: Add support for MPI toolbox commands
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 11/18] megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 10/18] megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 09/18] megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 08/18] megaraid_sas: Handle sequence JBOD map failure at driver level
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 07/18] megaraid_sas: Don't send FPIO to RL Bypass queue
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 06/18] megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 05/18] megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 04/18] megaraid_sas: Call disable_irq from process IRQ poll
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 03/18] megaraid_sas: Remove few debug counters from IO path
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 02/18] megaraid_sas: Add support for Non-secure Aero PCI IDs
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 01/18] megaraid_sas: Add 32 bit atomic descriptor support to AERO adapters
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v3 00/18] megaraid_sas: driver updates to 07.710.06.00-rc1
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Steffen Maier <maier@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] sd_zbc: Fix report zones buffer allocation
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• Re: [PATCH 3/4] scsi: sd_zbc: add zone open, close, and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• Re: [PATCH 2/3] pm80xx : Event log size through sysfs.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] pm80xx : Fixed kernel panic during error recovery for SATA drive.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [EXT] [PATCH v2 2/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_srr
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [EXT] [PATCH v2 1/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_rec
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] lib/hexdump.c: Allow multiple groups to be separated by lines '|'
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 0/7] Hexdump Enhancements
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• [PATCH v4 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 1/7] lib/hexdump.c: Fix selftests
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 0/7] Hexdump Enhancements
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 6/7] lib/hexdump.c: Allow multiple groups to be separated by spaces
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 5/7] lib/hexdump.c: Allow multiple groups to be separated by lines '|'
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 7/7] lib/hexdump.c: Optionally retain byte ordering
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v4 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH 3/3] block: Limit zone array allocation size
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 1/3] block: Allow mapping of vmalloc-ed buffers
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 2/3] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 0/3] Fix zone revalidation memory allocation failures
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 2/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_srr
  • From: Lin Yi <teroincn@xxxxxxx>
• [PATCH v2 1/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_rec
  • From: Lin Yi <teroincn@xxxxxxx>
• [PATCH v2 0/2] Fix struct bnx2fc_cmd refcount imbalance in several functions
  • From: Lin Yi <teroincn@xxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 6/8] IB/srp: set virt_boundary_mask in the scsi host
  • From: Max Gurtovoy <maxg@xxxxxxxxxxxx>
• Re: [PATCH 5/8] IB/iser: set virt_boundary_mask in the scsi host
  • From: Max Gurtovoy <maxg@xxxxxxxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH 3/4] scsi: sd_zbc: add zone open, close, and finish support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Steffen Maier <maier@xxxxxxxxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [bug report] [SCSI] esas2r: Directly call kernel functions for atomic bit operations
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 4/4] mpt3sas: Fix msix load balance on and off settings
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 3/4] mpt3sas: Fix determine smp affinity on per HBA basis
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 2/4] mpt3sas: Fix look configured PCIe link speed not cap
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 1/4] mpt3sas: Remove CPU arch check to determine perf_mode
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 0/4] mpt3sas: bug fix patches
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: "Lendacky, Thomas" <Thomas.Lendacky@xxxxxxx>
• Re: [PATCH 1/9] blk-mq: allow hw queues to share hostwide tags
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH V5 00/16] use sg helper to operate scatterlist
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V5 00/16] use sg helper to operate scatterlist
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• Re: [PATCH v2 17/18] megaraid_sas: Introduce various Aero performance modes
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_srr
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH 1/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_rec
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH 1/9] blk-mq: allow hw queues to share hostwide tags
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 1/9] blk-mq: allow hw queues to share hostwide tags
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 2/9] block: null_blk: introduce module parameter of 'g_host_tags'
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 6/6] bnx2fc: Update the driver version to 2.12.10.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 5/6] bnx2fc: Limit the IO size according to the FW capability.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 4/6] bnx2fc: Do not allow both a cleanup completion and abort completion for the same request.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 3/6] bnx2fc: Separate out completion flags and variables for abort and cleanup.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 1/6] bnx2fc: Redo setting source FCoE MAC.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 2/6] bnx2fc: Only put reference to io_req in bnx2fc_abts_cleanup if cleanup times out.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 0/6] bnx2fc: Update to the driver.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 2/3] pm80xx : Event log size through sysfs.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH 3/3] pm80xx : Modified the logic to collect IOP event logs.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH 1/3] pm80xx : Fixed kernel panic during error recovery for SATA drive.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH 0/3] pm0xx : Updates for driver version 0.1.39.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• RE: [PATCH v2 0/3] scsi: ufs: typo fixes and improvement
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH v2 3/3] scsi: ufs-bsg: complete ufs-bsg job only if no error
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH v2 2/3] scsi: ufs-bsg: fix typo in ufs_bsg_request
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH v2 0/3] scsi: ufs: typo fixes and improvement
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [PATCH V1] scsi: ufs-bsg: complete ufs-bsg job only if no error
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: lijiang <lijiang@xxxxxxxxxx>
• [PATCH 2/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_srr
  • From: Lin Yi <teroincn@xxxxxxx>
• [PATCH 1/2] scsi :bnx2fc :bnx2fc_els :fix bnx2fc_cmd refcount imbalance in send_rec
  • From: Lin Yi <teroincn@xxxxxxx>
• [PATCH 0/2] Fix struct bnx2fc_cmd refcount imbalance in different functions
  • From: Lin Yi <teroincn@xxxxxxx>
• [PATCH V1] scsi: ufs-bsg: complete ufs-bsg job only if no error
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.2-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SCSI fixes for 5.2-rc5
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Minwoo Im <minwoo.im.dev@xxxxxxxxx>
• Re: [PATCH 4/4] dm: add zone open, close and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 3/4] scsi: sd_zbc: add zone open, close, and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 2/4] null_blk: add zone open, close, and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 1/4] block: add zone open, close and finish support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 2/3] qla2xxx: on session delete return nvme cmd
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 0/3] qla2xxx: Fix crashes with FC-NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: "Lendacky, Thomas" <Thomas.Lendacky@xxxxxxx>
• [PATCH 1/4] block: add zone open, close and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• [PATCH 3/4] scsi: sd_zbc: add zone open, close, and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• [PATCH 2/4] null_blk: add zone open, close, and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• [PATCH 4/4] dm: add zone open, close and finish support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• [PATCH 0/4] open, close, finish zone support
  • From: Matias Bjørling <mb@xxxxxxxxxxx>
• Re: [PATCH 5/6] qla2xxx: Make the code for freeing SRBs more systematic
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] scsi: ufshdc-pci: Add Intel PCI Ids for EHL
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [RESEND RFC PATCH] mpt3sas: support target smid for [abort|query] task
  • From: Minwoo Im <minwoo.im@xxxxxxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: lijiang <lijiang@xxxxxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Quinn Tran <qutran@xxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: virtio_scsi: remove unused 'affinity_hint_set'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: bnx2fc: Check if sense buffer has been allocated during completion
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] mpt3sas
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mvumi: fix build warning
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mvumi: fix build warning
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: mvumi: fix build warning
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 18/18] megaraid_sas: Update driver version to 07.710.06.00-rc1
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 17/18] megaraid_sas: Introduce various Aero performance modes
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 16/18] megaraid_sas: Use high IOPs queues based on IO workload
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 15/18] megaraid_sas: Set affinity for high IOPs reply queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 14/18] megaraid_sas: Enable coalescing for high IOPs queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 13/18] megaraid_sas: Add support for High IOPs queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 12/18] megaraid_sas: Add support for MPI toolbox commands
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 11/18] megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 10/18] megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 09/18] megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 08/18] megaraid_sas: Handle sequence JBOD map failure at driver level
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 07/18] megaraid_sas: Don't send FPIO to RL Bypass queue
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 06/18] megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 05/18] megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 04/18] megaraid_sas: Call disable_irq from process IRQ poll
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 03/18] megaraid_sas: Remove few debug counters from IO path
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 02/18] megaraid_sas: Add support for Non-secure Aero PCI IDs
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 01/18] megaraid_sas: Add 32 bit atomic descriptor support to AERO adapters
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH v2 00/18] megaraid_sas: driver updates to 07.710.06.00-rc1
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• Re: [PATCH v3 0/7] Hexdump Enhancements
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH 2/2] scsi: mpt3sass: use DEVICE_ATTR_{RO, RW}
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: mpt3sas: make driver options visible in sys
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH 7/8] mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH 0/2] mpt3sas
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH 7/8] mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] scsi: mvumi: fix build warning
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• RE: [PATCH 1/8] scsi: add a host / host template field for the virt boundary
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• [PATCH] sd_zbc: Fix report zones buffer allocation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v3 0/7] Hexdump Enhancements
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 0/7] Hexdump Enhancements
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v3 0/7] Hexdump Enhancements
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 0/7] Hexdump Enhancements
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: osst: Use struct_size() in kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH V5 00/16] use sg helper to operate scatterlist
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] qla2xxx: Make sure that aborted commands are freed
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH V5 00/16] use sg helper to operate scatterlist
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: virtio_scsi: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] scsi: fdomain: fix building pcmcia front-end
  • From: Ondrej Zary <linux@xxxxxxx>
• Re: [PATCH v3 0/7] Hexdump Enhancements
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH] scsi: mvsas: Use struct_size() in kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: virtio_scsi: remove unused 'affinity_hint_set'
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH] scsi: scsi_sysfs.c: Hide wwid sdev attr if VPD is not supported
  • From: Hannes Reinecke <hare@xxxxxxxx>
• Re: [PATCH] scsi: scsi_sysfs.c: Hide wwid sdev attr if VPD is not supported
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH 1/2] scsi_host: add support for request batching
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 1/1] scsi: virtio_scsi: remove unused 'affinity_hint_set'
  • From: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
• [PATCH] scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH] scsi: scsi_sysfs.c: Hide wwid sdev attr if VPD is not supported
  • From: Hannes Reinecke <hare@xxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs-qcom: Add support for platforms booting ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 23/28] docs: target: convert docs to ReST and rename to *.rst
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: scsi_sysfs.c: Hide wwid sdev attr if VPD is not supported
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: fdomain: fix building pcmcia front-end
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs-qcom: Add support for platforms booting ACPI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix hardlockup in abort command during driver remove.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: Avoid runtime suspend possibly being blocked forever
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] qedi bug fix and update driver version
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: megaraid_sas: Use struct_size() helper
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/7] NCR5380 drivers: fixes and other improvements
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: storvsc: Add ability to change scsi queue depth
  • From: Branden Bonaby <brandonbonaby94@xxxxxxxxx>
• Re: [PATCH v2 2/7] scsi: NCR5380: Always re-enable reselection interrupt
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH] [resend] wd719x: Fix resets and aborts
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Avoid that .queuecommand() gets called for a quiesced SCSI device
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: cxgb4i: add support for IEEE_8021QAZ_APP_SEL_STREAM selector
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: tcmu: Simplify 'tcmu_update_uio_info()'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: storvsc: Add ability to change scsi queue depth
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] mpt3sas
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: libsas, lldds: Use dev_is_expander()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mpt3sas: Mark expected switch fall-through
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 2/7] scsi: NCR5380: Always re-enable reselection interrupt
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V5 00/16] use sg helper to operate scatterlist
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 11/18] megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] scsi: scsi_sysfs.c: Hide wwid sdev attr if VPD is not supported
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH] scsi: tcmu: Simplify 'tcmu_update_uio_info()'
  • From: Michael Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH v2 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [EXT] Re: [PATCH 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Quinn Tran <qutran@xxxxxxxxxxx>
• [PATCH v2 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 2/3] qla2xxx: on session delete return nvme cmd
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 0/3] qla2xxx: Fix crashes with FC-NVMe devices
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• RE: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: "Elliott, Robert (Servers)" <elliott@xxxxxxx>
• Re: [PATCH 1/1] scsi: ufs-qcom: Add support for platforms booting ACPI
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [V3 00/10] mpt3sas: Aero/Sea HBA feature addition
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [PATCH 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: Arun Easi <aeasi@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: "Lendacky, Thomas" <Thomas.Lendacky@xxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 19/28] docs: powerpc: convert docs to ReST and rename to *.rst
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH 2/3] qla2xxx: on session delete return nvme cmd
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• [PATCH 18/18] megaraid_sas: Update driver version to 07.710.06.00-rc1
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 17/18] megaraid_sas: Introduce various Aero performance modes
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 16/18] megaraid_sas: Use high IOPs queues based on IO workload
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 15/18] megaraid_sas: Set affinity for high IOPs reply queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 14/18] megaraid_sas: Enable coalescing for high IOPs queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 13/18] megaraid_sas: Add support for High IOPs queues
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 12/18] megaraid_sas: Add support for MPI toolbox commands
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 11/18] megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 10/18] megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 09/18] megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 08/18] megaraid_sas: Handle sequence JBOD map failure at driver level
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 07/18] megaraid_sas: Don't send FPIO to RL Bypass queue
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 06/18] megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 05/18] megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 04/18] megaraid_sas: Call disable_irq from process IRQ poll
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 03/18] megaraid_sas: Remove few debug counters from IO path
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 02/18] megaraid_sas: Add support for Non-secure Aero PCI IDs
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 01/18] megaraid_sas: Add 32 bit atomic descriptor support to AERO adapters
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• [PATCH 00/18] megaraid_sas: driver updates to 07.710.06.00-rc1
  • From: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] scsi: Avoid that .queuecommand() gets called for a blocked SCSI device
  • From: Hannes Reinecke <hare@xxxxxxxx>
• Re: [PATCH v4 1/3] scsi: Restrict user space SCSI device state changes to "running" and "offfline"
  • From: Hannes Reinecke <hare@xxxxxxxx>
• Re: [PATCH V5 11/16] scsi: aha152x: use sg helper to operate scatterlist
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: "Lendacky, Thomas" <Thomas.Lendacky@xxxxxxx>
• [PATCH V5 16/16] NCR5380: Support chained sg lists
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 15/16] scsi: wd33c93: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 14/16] scsi: ppa: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 13/16] scsi: pcmcia: nsp_cs: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 12/16] scsi: imm: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 11/16] scsi: aha152x: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 09/16] staging: rtsx: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 08/16] staging: unisys: visorhba: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 07/16] usb: image: microtek: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 06/16] scsi: pmcraid: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 05/16] scsi: ipr: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 04/16] scsi: mvumi: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 03/16] scsi: lpfc: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 02/16] scsi: advansys: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 01/16] scsi: vmw_pscsi: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V5 00/16] use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 1/2] scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• [PATCH 2/2] usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• [PATCH 0/2] Honor VPD check in usb/storage for SanDisk device
  • From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH 7/8] mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 1/8] scsi: add a host / host template field for the virt boundary
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH V4 11/16] scsi: aha152x: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Quinn Tran <qutran@xxxxxxxxxxx>
• Re: [PATCH V4 00/16] use sg helper to operate scatterlist
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH V4 11/16] scsi: aha152x: use sg helper to operate scatterlist
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v1] scsi: Don't select SCSI_PROC_FS by default
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 6/8] IB/srp: set virt_boundary_mask in the scsi host
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 4/8] storvsc: set virt_boundary_mask in the scsi host template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 3/8] ufshcd: set max_segment_size in the scsi host template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/8] scsi: take the DMA max mapping size into account
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/8] scsi: add a host / host template field for the virt boundary
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [EXT] Re: [PATCH 3/3] qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 6/6] qla2xxx: Only free an SRB once the reference count drops to zero
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 5/6] qla2xxx: Make the code for freeing SRBs more systematic
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 4/6] qla2xxx: Move the sp->ref_count initialization into qla2xxx_get_qpair_sp()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 3/6] qla2xxx: Enable type checking for the SRB free and done callback functions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 2/6] qla2xxx: Really fix qla2xxx_eh_abort()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/6] qla2xxx: Make qla2x00_abort_srb() again decrease the sp reference count
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 0/6] qla2xxx abort handling fixes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: Arun Easi <aeasi@xxxxxxxxxxx>
• Re: [PATCH 2/3] qla2xxx: on session delete return nvme cmd
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 1/3] qla2xxx: Fix kernel crash after disconnecting NVMe devices
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH] [resend] wd719x: Fix resets and aborts
  • From: Ondrej Zary <linux@xxxxxxx>
• Re: [PATCH 6/8] IB/srp: set virt_boundary_mask in the scsi host
  • From: Sagi Grimberg <sagi@xxxxxxxxxxx>
• Re: [PATCH 5/8] IB/iser: set virt_boundary_mask in the scsi host
  • From: Sagi Grimberg <sagi@xxxxxxxxxxx>
• RE: [PATCH] scsi: storvsc: Add ability to change scsi queue depth
  • From: KY Srinivasan <kys@xxxxxxxxxxxxx>
• [PATCH v4 3/3] RDMA/srp: Fix a sleep-in-invalid-context bug
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 2/3] scsi: Avoid that .queuecommand() gets called for a blocked SCSI device
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 1/3] scsi: Restrict user space SCSI device state changes to "running" and "offfline"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 0/3] Avoid that .queuecommand() gets called for a quiesced SCSI device
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] fcoe: avoid memset across pointer boundaries
  • From: Hannes Reinecke <hare@xxxxxxxx>
• Re: [PATCH 1/3] scsi: Do not allow user space to change the SCSI device state into SDEV_BLOCK
  • From: Hannes Reinecke <hare@xxxxxxxx>
• [PATCH] scsi: cxgb4i: add support for IEEE_8021QAZ_APP_SEL_STREAM selector
  • From: Varun Prakash <varun@xxxxxxxxxxx>
• [PATCH 3/8] ufshcd: set max_segment_size in the scsi host template
  • From: Christoph Hellwig <hch@xxxxxx>
• properly communicate queue limits to the DMA layer v2
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 1/8] scsi: add a host / host template field for the virt boundary
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 2/8] scsi: take the DMA max mapping size into account
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 5/8] IB/iser: set virt_boundary_mask in the scsi host
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 6/8] IB/srp: set virt_boundary_mask in the scsi host
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 8/8] megaraid_sas: set an unlimited max_segment_size
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 7/8] mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 4/8] storvsc: set virt_boundary_mask in the scsi host template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 1/1] scsi: ufs-qcom: Add support for platforms booting ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] scsi: fdomain: fix building pcmcia front-end
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] megaraid_sas: Delete a redundant memory setting in megasas_alloc_cmds()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH V4 09/16] staging: rtsx: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: lijiang <lijiang@xxxxxxxxxx>
• Re: [PATCH V4 09/16] staging: rtsx: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• RE: [PATCH 10/13] megaraid_sas: set virt_boundary_mask in the scsi host
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: When SME is enabled on Dell PowerEdge R7425(AMD) machine, the first kernel can not successfully boot because of the megaraid_sas failure
  • From: Dave Young <dyoung@xxxxxxxxxx>
• Re: [PATCH V4 05/16] scsi: ipr: use sg helper to operate scatterlist
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 10/13] megaraid_sas: set virt_boundary_mask in the scsi host
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 16/16] NCR5380: Support chained sg lists
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 15/16] scsi: wd33c93: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 14/16] scsi: ppa: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 13/16] scsi: pcmcia: nsp_cs: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 12/16] scsi: imm: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 11/16] scsi: aha152x: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 09/16] staging: rtsx: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 08/16] staging: unisys: visorhba: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 07/16] usb: image: microtek: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 06/16] scsi: pmcraid: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 05/16] scsi: ipr: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 04/16] scsi: mvumi: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 03/16] scsi: lpfc: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 02/16] scsi: advansys: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V4 01/16] scsi: vmw_pscsi: use sg helper to operate scatterlist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC v2 00/11] DVFS in the OPP core
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>