[PATCH AUTOSEL 4.9 02/13] scsi: megaraid: disable device when probe failed after enabled device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>

[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ]

For pci device, need to disable device when probe failed after enabled
device.

Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@xxxxxxxxxxxxx
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Reviewed-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/megaraid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 19bffe0b2cc0a..2cbfec6a74662 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4219,11 +4219,11 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		 */
 		if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
 		    pdev->subsystem_device == 0xC000)
-		   	return -ENODEV;
+			goto out_disable_device;
 		/* Now check the magic signature byte */
 		pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
 		if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
-			return -ENODEV;
+			goto out_disable_device;
 		/* Ok it is probably a megaraid */
 	}
 
-- 
2.20.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux