[PATCH] hpsa: add missing hunks in reset-patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



- correct returning from reset before outstanding
  commands are completed for the device.

Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 drivers/scsi/hpsa.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ac39ed79ccaa..216e557f703e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5477,6 +5477,8 @@ static int hpsa_ciss_submit(struct ctlr_info *h,
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
 
+	c->device = dev;
+
 	enqueue_cmd_and_start_io(h, c);
 	/* the cmd'll come back via intr handler in complete_scsi_command()  */
 	return 0;
@@ -5548,6 +5550,7 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
 		hpsa_cmd_init(h, c->cmdindex, c);
 		c->cmd_type = CMD_SCSI;
 		c->scsi_cmd = cmd;
+		c->device = dev;
 		rc = hpsa_scsi_ioaccel_raid_map(h, c);
 		if (rc < 0)     /* scsi_dma_map failed. */
 			rc = SCSI_MLQUEUE_HOST_BUSY;
@@ -5555,6 +5558,7 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
 		hpsa_cmd_init(h, c->cmdindex, c);
 		c->cmd_type = CMD_SCSI;
 		c->scsi_cmd = cmd;
+		c->device = dev;
 		rc = hpsa_scsi_ioaccel_direct_map(h, c);
 		if (rc < 0)     /* scsi_dma_map failed. */
 			rc = SCSI_MLQUEUE_HOST_BUSY;




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux