Re: [PATCH] V2. bnx2fc: Handle scope bits when array returns BUSY or TASK_SET_FULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2019-09-07 at 21:34 -0400, cdupuis1@xxxxxxxxx wrote:
> On Fri, 2019-09-06 at 16:26 -0400, Laurence Oberman wrote:
> > The qla2xxx driver had this issue as well when the newer array
> > firmware returned the retry_delay_timer in the fcp_rsp.
> > The bnx2fc is not handling the masking of the scope bits either
> > so the retry_delay_timestamp value lands up being a large value
> > added to the timer timestamp delaying I/O for up to 27 Minutes.
> > This patch adds similar code to handle this to the
> > bnx2fc driver to avoid the huge delay.
> > 
> > Signed-off-by: Laurence Oberman <loberman@xxxxxxxxxx>
> > ---
> >  drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
> >  1 file changed, 20 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
> > b/drivers/scsi/bnx2fc/bnx2fc_io.c
> > index 9e50e5b..39f4aeb 100644
> > --- a/drivers/scsi/bnx2fc/bnx2fc_io.c
> > +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
> > @@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
> > bnx2fc_cmd *io_req,
> >  	struct bnx2fc_rport *tgt = io_req->tgt;
> >  	struct scsi_cmnd *sc_cmd;
> >  	struct Scsi_Host *host;
> > +	u16 scope, qualifier = 0;
> >  
> >  
> >  	/* scsi_cmd_cmpl is called with tgt lock held */
> > @@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
> > bnx2fc_cmd *io_req,
> >  
> >  			if (io_req->cdb_status ==
> > SAM_STAT_TASK_SET_FULL ||
> >  			    io_req->cdb_status == SAM_STAT_BUSY) {
> > +				/* Newer array firmware with BUSY or
> > +				 * TASK_SET_FULL may return a status
> > that needs
> > +				 * the scope bits masked.
> > +				 * Or a huge delay timestamp up to 27
> > minutes
> > +				 * can result.
> > +				*/
> > +				if (fcp_rsp->retry_delay_timer) {
> > +					/* Upper 2 bits */
> > +					scope = fcp_rsp-
> > > retry_delay_timer
> > 
> > +						& 0xC000;
> > +					/* Lower 14 bits */
> > +					qualifier = fcp_rsp-
> > > retry_delay_timer
> > 
> > +						& 0x3FFF;
> > +				}
> > +				if (scope > 0 && qualifier > 0 &&
> > +					qualifier <= 0x3FEF) {
> >  				/* Set the jiffies + retry_delay_timer
> > * 100ms
> >  				   for the rport/tgt */
> > -				tgt->retry_delay_timestamp = jiffies +
> > -					fcp_rsp->retry_delay_timer * HZ
> > / 10;
> > +					tgt->retry_delay_timestamp =
> > jiffies +
> > +						(qualifier * HZ / 10);
> > +				}
> >  			}
> > -
> >  		}
> >  		if (io_req->fcp_resid)
> >  			scsi_set_resid(sc_cmd, io_req->fcp_resid);
> 
> What better thing to be doing than reviewing patches on a Saturday
> evening.  Looks good though I might suggest moving the indent of the
> comment in the new if statement.
> 
> Reviewed-by: Chad Dupuis <cdupuis1@xxxxxxxxx>
> 

The qla2xxx driver had this issue as well when the newer array
firmware returned the retry_delay_timer in the fcp_rsp.
The bnx2fc is not handling the masking of the scope bits either
so the retry_delay_timestamp value lands up being a large value
added to the timer timestamp delaying I/O for up to 27 Minutes.
This patch adds similar code to handle this to the
bnx2fc driver to avoid the huge delay.

V2. Indent comments as suggested

Signed-off-by: Laurence Oberman <loberman@xxxxxxxxxx>
Reported-by: David Jeffery <djeffery@xxxxxxxxxx>

---
 drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 9e50e5b..39f4aeb 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
bnx2fc_cmd *io_req,
 	struct bnx2fc_rport *tgt = io_req->tgt;
 	struct scsi_cmnd *sc_cmd;
 	struct Scsi_Host *host;
+	u16 scope, qualifier = 0;
 
 
 	/* scsi_cmd_cmpl is called with tgt lock held */
@@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
bnx2fc_cmd *io_req,
 
 			if (io_req->cdb_status ==
SAM_STAT_TASK_SET_FULL ||
 			    io_req->cdb_status == SAM_STAT_BUSY) {
+				/* Newer array firmware with BUSY or
+				 * TASK_SET_FULL may return a status
that needs
+				 * the scope bits masked.
+				 * Or a huge delay timestamp up to 27
minutes
+				 * can result.
+				*/
+				if (fcp_rsp->retry_delay_timer) {
+					/* Upper 2 bits */
+					scope = fcp_rsp-
>retry_delay_timer
+						& 0xC000;
+					/* Lower 14 bits */
+					qualifier = fcp_rsp-
>retry_delay_timer
+						& 0x3FFF;
+				}
+				if (scope > 0 && qualifier > 0 &&
+					qualifier <= 0x3FEF) {
 					/* Set the jiffies +
retry_delay_timer * 100ms
 				   	for the rport/tgt */
-				tgt->retry_delay_timestamp = jiffies +
-					fcp_rsp->retry_delay_timer * HZ
/ 10;
+					tgt->retry_delay_timestamp =
jiffies +
+						(qualifier * HZ / 10);
+				}
 			}
-
 		}
 		if (io_req->fcp_resid)
 			scsi_set_resid(sc_cmd, io_req->fcp_resid);
-- 
1.8.3.1





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux